randys06v6
forum member
- Joined
- Dec 16, 2009
- Posts
- 1,129
- Reaction score
- 1
I have a ton of stuff for sale. Doing a turbo Gen2 coyote swap into the mustang, so all must go!
Asking $5,100 OBO
Paxton Novi 2200 kit
Will include all of the following!
Comes with all bracketry and all piping
Upgraded intercooler to support 1000+hp
Converted to blow thru system for better readings and more effective tuning (but mainly to run a badass BOV WHOOSH!)
Tial Q 50mm BOV
Upgraded all clamps to T-bolt clamps
Dual drain lines due to HP increase (but can be closed to 1 line if not needed)
Kenne Bell Dual BAP
If you’re aiming for 550hp, I’ll include some 42lb injectors and a 10# pulley
Whole kit is the polished kit
Upgraded intake system to a power pipe system
Had the novi rebuilt for routine maintenance a little less 300 miles ago
Upgraded to stainless steel oil feed line (will include oil adaptor as well)
Will also include the Moroso Coolant Relocation expansion tank
Diablo Mafia MAF as well!
2012 Mustang GT coyote motor. Had 33,xxx miles. Tore apart to check internals etc. Was going to build it until I found a Gen2 I couldn’t pass up. Everything in pictures included. Paid $2,600. Asking $OLD. My loss is your gain.
All the following has 13,xxx miles:
Blue coil covers with black insert letters: $OLD
2016 mustang gt engine cover: $60
2016 manifold with throttle body and spacer: $100
2016 gt ecu: $50
2016 Mustang GT MT-82 transmission with clutch, pressure plate, flywheel and throw out bearing: $1,500
ATI super damper w/ac 2011-2017 Mustang GT: $OLD
Everything is located in Fredericksburg, Virginia
Asking $5,100 OBO
Paxton Novi 2200 kit
Will include all of the following!
Comes with all bracketry and all piping
Upgraded intercooler to support 1000+hp
Converted to blow thru system for better readings and more effective tuning (but mainly to run a badass BOV WHOOSH!)
Tial Q 50mm BOV
Upgraded all clamps to T-bolt clamps
Dual drain lines due to HP increase (but can be closed to 1 line if not needed)
Kenne Bell Dual BAP
If you’re aiming for 550hp, I’ll include some 42lb injectors and a 10# pulley
Whole kit is the polished kit
Upgraded intake system to a power pipe system
Had the novi rebuilt for routine maintenance a little less 300 miles ago
Upgraded to stainless steel oil feed line (will include oil adaptor as well)
Will also include the Moroso Coolant Relocation expansion tank
Diablo Mafia MAF as well!
2012 Mustang GT coyote motor. Had 33,xxx miles. Tore apart to check internals etc. Was going to build it until I found a Gen2 I couldn’t pass up. Everything in pictures included. Paid $2,600. Asking $OLD. My loss is your gain.
All the following has 13,xxx miles:
Blue coil covers with black insert letters: $OLD
2016 mustang gt engine cover: $60
2016 manifold with throttle body and spacer: $100
2016 gt ecu: $50
2016 Mustang GT MT-82 transmission with clutch, pressure plate, flywheel and throw out bearing: $1,500
ATI super damper w/ac 2011-2017 Mustang GT: $OLD
Everything is located in Fredericksburg, Virginia
Last edited: