Do you trust that Dorman piece? I decided against it and just bought a 90* elbow and used 5/8" hose on both sides.no, just the part that was leaking. didn't want to disturb too much.
dorman elbow and 5/8 hose.
Do you trust that Dorman piece? I decided against it and just bought a 90* elbow and used 5/8" hose on both sides.no, just the part that was leaking. didn't want to disturb too much.
dorman elbow and 5/8 hose.
What brand? On my 2013 I had the MRT jacking rails and they extended all the way to almost the back of the of the side rail. That does seem a little short. But I guess if you are jacking up the side that is about where you would put the jack.Thought they would be longer. It stops where the ratchet is laying on the driveway.
View attachment 69403
It's a standard jack- still works fine so I've never replaced it. I have to drive the car up on boards to even get it under the front crossmember or rear diff.
SteedaWhat brand? On my 2013 I had the MRT jacking rails and they extended all the way to almost the back of the of the side rail. That does seem a little short. But I guess if you are jacking up the side that is about where you would put the jack.
Yesterday. Flushed the brake fluid in my Mustang. Fresh Motul RBF600 in, removing the fluid that I put in at the end of 2016. A little overdue for this stuff.
Old and new:
View attachment 69423 View attachment 69424
And the old stuff, after the flush was done. Can see some of the fresh stuff still in the tubing going to the jar, nice color difference:
View attachment 69425
The new blue valve covers look great. I have them also. The red filter and rubber adds some POP!
Thanks! Funny thing about the rubber on the CAI, I just flipped the blue ones inside out. Easiest mod I've done lolThe new blue valve covers look great. I have them also. The red filter and rubber adds some POP!
I have to do that, my brake fluid is blacker than my soul.Yesterday. Flushed the brake fluid in my Mustang. Fresh Motul RBF600 in, removing the fluid that I put in at the end of 2016. A little overdue for this stuff.
Old and new:
View attachment 69423 View attachment 69424
And the old stuff, after the flush was done. Can see some of the fresh stuff still in the tubing going to the jar, nice color difference:
View attachment 69425
Yesterday. Flushed the brake fluid in my Mustang. Fresh Motul RBF600 in, removing the fluid that I put in at the end of 2016. A little overdue for this stuff.
Had some fun scaring some Porsches in the first 5 mins of this video.
Also removed the Tire Tats that the previous owner installed.
View attachment 69404
I have to do that, my brake fluid is blacker than my soul.
I don't have a vacuum bleeder though.