Dyno sheets and numbers

jacobychrisa

Junior Member
Joined
Apr 15, 2019
Posts
26
Reaction score
3
I would love to get a lito tune. But how do you get ahold of him?

Sent from my SM-N960U using Tapatalk
 

Unexplodedcow

Member
Joined
May 23, 2011
Posts
52
Reaction score
16
They have a new revision now that works and fits great

Good to know, especially as the cars age, and the plastic would fail. I'd expect the 2009 and 2010 years to especially have fun since the intakes have the CMP shaft built into them, and require additional seals.

As an aside, Jegs also makes one under their own name, but suspiciously similar?

https://www.jegs.com/i/JEGS/555/513058/10002/-1
 
Last edited:

dazed1

Junior Member
Joined
Feb 14, 2011
Posts
2
Reaction score
2
Location
Stillwater, Minnesota
I have a 2009 Bullitt, ford performance intake, BBK long tubes, BBK high flow catted x-pipe, full Borla ATAK cat back exhaust, BBK under pullys, Ford upgraded throttle body and last a 93 octane Blow by Racing tune.
Unmodded this engine was rated at 320hp at the crank. With the mods last Dyno showed 345hp, 330 torque UNCORRECTED. It shows 330/322 corrected.
Still has stock 3.73 rear gears and yes that old speedo needle will go past the last marks on the speedo just beffbe you shft into 5th gear. Great car!
 

jacobychrisa

Junior Member
Joined
Apr 15, 2019
Posts
26
Reaction score
3
I have a 2009 Bullitt, ford performance intake, BBK long tubes, BBK high flow catted x-pipe, full Borla ATAK cat back exhaust, BBK under pullys, Ford upgraded throttle body and last a 93 octane Blow by Racing tune.
Unmodded this engine was rated at 320hp at the crank. With the mods last Dyno showed 345hp, 330 torque UNCORRECTED. It shows 330/322 corrected.
Still has stock 3.73 rear gears and yes that old speedo needle will go past the last marks on the speedo just beffbe you shft into 5th gear. Great car!

So we should be pretty close then huh? Without my cats and with the cams I could be a little higher

Sent from my SM-N960U using Tapatalk
 

ghunt81

New parts on old junk!
S197 Team Member
Joined
Jan 20, 2016
Posts
1,074
Reaction score
160
Location
Clarksburg, WV
I'm surprised the PO of your car installed muthr thumprs and didn't even bother to swap out the exhaust manifolds. I would imagine that thing was kind of a dog at low RPM's.
 

tjm73

of Omicron Persei 8
S197 Team Member
Joined
Jun 9, 2010
Posts
12,092
Reaction score
1,638
Location
Rush, NY
I've got an 08 GT.

bd707866c6e2f958bcfa8b106217b4e9.jpg

Those wheels look really good on that body style. Did they require spacers?
 

jacobychrisa

Junior Member
Joined
Apr 15, 2019
Posts
26
Reaction score
3
I'm surprised the PO of your car installed muthr thumprs and didn't even bother to swap out the exhaust manifolds. I would imagine that thing was kind of a dog at low RPM's.
Oh man it is. Until about 3500 it's bad. Just got the headers yesterday and starting the installation tomorrow night

Sent from my SM-N960U using Tapatalk
 

ghunt81

New parts on old junk!
S197 Team Member
Joined
Jan 20, 2016
Posts
1,074
Reaction score
160
Location
Clarksburg, WV
Those wheels look really good on that body style. Did they require spacers?

S550 wheels will go right on without spacers if you have standard brakes, however they won't clear Brembos without a spacer.
 

tjm73

of Omicron Persei 8
S197 Team Member
Joined
Jun 9, 2010
Posts
12,092
Reaction score
1,638
Location
Rush, NY
S550 wheels will go right on without spacers if you have standard brakes, however they won't clear Brembos without a spacer.

The wheels on your car look awesome too. LOL!!
 

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top