Looking for ported heads.

myystanng

forum member
Joined
Mar 4, 2009
Posts
271
Reaction score
20
I’m looking for ported heads for my 3v.

Had an issue on my livernois stage 3 and at least one head is bad.

Let me know what you guys have


Sent from my iPhone using Tapatalk
 

myystanng

forum member
Joined
Mar 4, 2009
Posts
271
Reaction score
20
Thanks for the response man!


Sent from my iPhone using Tapatalk
 

msvela448

forum member
Joined
Jun 8, 2017
Posts
444
Reaction score
176
I have a set of stock 3v heads (bare) I would sell that you could have worked over. They have a couple of broken exhaust studs, but nothing a machine shop couldn't take care of. I have the stock retainers and keepers and all the valves except 8 intakes that were bad (all 8 exhaust and the other 8 intakes are good). I have two sets of stock springs, and the stock cams too, but I doubt you want those. PM me if you want more info.

Sent from my SM-N975U using Tapatalk
 

myystanng

forum member
Joined
Mar 4, 2009
Posts
271
Reaction score
20
I have a set of stock 3v heads (bare) I would sell that you could have worked over. They have a couple of broken exhaust studs, but nothing a machine shop couldn't take care of. I have the stock retainers and keepers and all the valves except 8 intakes that were bad (all 8 exhaust and the other 8 intakes are good). I have two sets of stock springs, and the stock cams too, but I doubt you want those. PM me if you want more info.

Sent from my SM-N975U using Tapatalk


Thank you for the offer, but I have another set of stock heads if I go that route


Sent from my iPhone using Tapatalk
 

08MustangDude

Resident Fuktard
Joined
Aug 27, 2018
Posts
307
Reaction score
31
Buying someone else's ported heads won't match your intake, or your
exhaust headers. You port your heads and intake to match the parts
so there are no ledges if the ports on the used one you bought don't
match with your intake manifold or exhaust headers.

I the exhaust sides are too large, there will be a ledge at the header, and
mess up the exhaust flow.

If one or two of the intake sides are smaller than your intake, then you
have a ledge that interferes with air-flow.

Porting should match your components, not someone else's.

POLISH the exhaust sides, not the intake.
 

myystanng

forum member
Joined
Mar 4, 2009
Posts
271
Reaction score
20
Thank man, I’ll hit him up!


Sent from my iPhone using Tapatalk
 

Waakeeen

Member
Joined
Sep 13, 2019
Posts
79
Reaction score
8
Since were talking about heads does anyone know if 2010 stock heads fit a 2006? I know both are 3v but I don’t know if I’m missing something.
 

msvela448

forum member
Joined
Jun 8, 2017
Posts
444
Reaction score
176
Yes they will fit.. I have a set of 2010 3v heads on my 2007. New-style spark plugs is all you'll need.

Sent from my SM-N975U using Tapatalk
 

Waakeeen

Member
Joined
Sep 13, 2019
Posts
79
Reaction score
8
Awesome! Also there wasn’t any clearance issue with the spark plug and piston?
 

myystanng

forum member
Joined
Mar 4, 2009
Posts
271
Reaction score
20
They bolt right up and has the better plugs!


Sent from my iPhone using Tapatalk
 

msvela448

forum member
Joined
Jun 8, 2017
Posts
444
Reaction score
176
The coils are also interchangeable. I used the old coils in the new heads for a long time.

Sent from my SM-N975U using Tapatalk
 

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top