What have you done to your mustang today?

Anti

forum member
Joined
Jul 24, 2017
Posts
612
Reaction score
275
Location
HSV, Alabama
Forgot to take a picture with carpet in. It was dark. Also that side shot makes it look like it is sticking out further than it really is. It measures about a inch and a half higher than the metal.

Also installed my sequential tail lights at the same time. Then I suddenly accumulated two neighbor teenagers that were asking advice on wheels for their new edge one of them just bought. XD

20200328_171452.jpg

20200328_171101.jpg

20200328_174626.jpg
 
Last edited:

Jgt58

Member
Joined
Jan 1, 2020
Posts
295
Reaction score
77
Bleeding clutch
a56307e9a0d09ac138ba55a001eae2c9.jpg
7d5d407cdf12fa9ee60e5f72435e44d9.jpg
be448f4b804fc860bbf113f2ecd3c7b4.jpg


Sent from my SM-N950U using Tapatalk
 

Gabe

Whippled Coyote
Joined
Aug 7, 2011
Posts
8,440
Reaction score
1,531
Location
NC
Started my "painted Brembo calipers" project.
Also doing new StopTech slotted front rotors and new Hawk HPS 5.0 front brake pads since the stock pads were down to 1-2mm.
So far, cleaned the calipers with brake clean spray and with VHT Caliper Cleaner, then 4 coats of VHT Flame-Proof Primer.

20200402_brembo_bagged_2.jpg
20200402_brembo_primer2.jpg
 

JJ427R

Senior Member
Joined
Jan 14, 2015
Posts
3,305
Reaction score
1,205
Was going to get one out today but noticed the tabs expired in February, whoops... ordered them online as the dmv is closed.
 

travelers

Senior Member
Joined
Apr 6, 2007
Posts
3,028
Reaction score
79
Location
Eastern Pa
Started my "painted Brembo calipers" project.
Also doing new StopTech slotted front rotors and new Hawk HPS 5.0 front brake pads since the stock pads were down to 1-2mm.
So far, cleaned the calipers with brake clean spray and with VHT Caliper Cleaner, then 4 coats of VHT Flame-Proof Primer.

View attachment 72181
View attachment 72182

Looking good Gabe, I need to do mine also. I have the red for mine and new high temp stickers. Don's ask where as I got them last year and don't remember where I got them.....Hahah
 

Gabe

Whippled Coyote
Joined
Aug 7, 2011
Posts
8,440
Reaction score
1,531
Location
NC
Looking good Gabe, I need to do mine also. I have the red for mine and new high temp stickers. Don's ask where as I got them last year and don't remember where I got them.....Hahah

Thanks. I got my decals off an eBay seller for $8, lol
 

ghunt81

New parts on old junk!
S197 Team Member
Joined
Jan 20, 2016
Posts
1,074
Reaction score
160
Location
Clarksburg, WV
I painted my calipers with that brush-on Duplicolor paint kit a couple years ago...it did not hold up to brake fluid as well as I hoped it would, but it's been pretty good otherwise.
 

DudeStang

Member
Joined
Apr 18, 2017
Posts
113
Reaction score
40
Location
Northern Virginia
I wish I could say something substantial but I've really been procrastinating on putting on the Steeda sway bars that I've had sitting in my garage for months. Also, finally managed to have oil and a filter delivered so I can change my oil sometime in the next week or two.
 

Gabe

Whippled Coyote
Joined
Aug 7, 2011
Posts
8,440
Reaction score
1,531
Location
NC
Wow, they are really going to pop with your dark color wheels. I'm guessing your using black letters.

Yup, just received the new decals today, so I'll be getting back to this soon.
Looking to use the smallest size or the next immediate size up.
The stock decals were about 2.75" long.
The smallest size I received is 3" long.

IMG_20200404_121720157.jpg
 

Anti

forum member
Joined
Jul 24, 2017
Posts
612
Reaction score
275
Location
HSV, Alabama
I dunno, Gabe. The Brembo on my calipers sure seem bigger than 2.75" long. Oh, wait.. I have the 6 piston calipers.. my.. bad.. ;)

XD. I'll see myself out..

20200404_185233.jpg
 

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top