Airbox retaining bolts and grommets Mustang GT2010

Hello guys
I still have the 2 grommets that go under the box though one is missing the steel thread inside plus I lost 1 screw/bolt.
I have been to Ford and you have to buy the whole box to have the screw/bolts with the threads that go into the grommets.
Online I found the grommets but no thread in it.
Do you know where to fing these parts or did you replace by something else ?
Thank you

You're making this too hard. Just go to a hardware store (or store that sells automotive screws/bolts) to find a replacement if you know the metric size and length needed. I'd also try another dealer. In my own case the local Ford dealer parts dept is about worthless and charges too much but the Lincoln dealer just down the street has been able to get any part I ever needed at a "reasonable" price for my Mustang GT.
Go figure....

Ok , I will try to diy something...

I'd guess you could easily grab them from a u-pick junkyard if you happen to have one nearby.

will try tomorrow

Lowes has them if you are really set on using them.

Finally didn’t need the bolts as the Airaid has spikes that go into the grommets without any bolt to be attached. But tou are right, you can diy with sone stuff I have seen in lowes