broken manifold rear bolt

hey guys ,
just started to break down and tear apart my 3v ,,
days prior , i sprayed the rear manifold bolt nuts with PB blaster,,,
lastnight i had a go at it,, and the results were good,, heat and an impact seemed to do well,,

well the 3rd nut seized onto the bolt and snaped it off,, theres about 2 inchs of bolt hanging out, so when i pull the heads off to do the head gaskets, ill heat and screw that broken bolt out,,,

but i cant seen to find a replacement bolt to fix this manifold,, i can find the manifold bolts that bolt the exhaust to the head,, but cannot find the rear 2 bolts that screw the manifold to the exhaust??? thats what i need as i snapped one,,

all my searches come up with the bolts for the manifold to head???

anyone know where to get this replacement?

https://www.amazon.com/gp/product/B000NZZ3RC These are the correct size, and you get extras.

@skwerl has you covered. Pretty common issue, when working on semi-older motors. Now you'll have fresh anchors f/ the project.

skwerl said:

https://www.amazon.com/gp/product/B000NZZ3RC These are the correct size, and you get extras.

Click to expand...

just ordered and gonna be here tomorrow, thanx alot

skwerl said:

https://www.amazon.com/gp/product/B000NZZ3RC These are the correct size, and you get extras.

Click to expand...

I just bought those last week in anticipation of tearing down the engine later this year.

These are labeled as 62mm long. They also list some for fords that are 72mm long, but the longer ones interfere with installing the oxygen sensors. I just went through this replacing a cracked exhaust manifold on my 5.4 in my F350.