I got got a ford performance 90mm throttle body for my 2014 mustang gt. It says it needs calibrated and I’m wondering how I can do that. I installed it along with a new boss 302 intake manifold and boss 302 radiator. Tuned it and tried to start it and it turns once and dies. Help please.
Throttle body calibration
- Thread starter ddorsten
- Start date
Robert Larimer
Member
- Joined
- May 23, 2019
- Posts
- 368
- Reaction score
- 104
The video on American muscle about that TB says you need to "repin" the cable to connect it. It is not plug and play. They mentioned nothing about calibration. Find some instructions.
https://www.americanmuscle.com/frpp-90mm-tbody-1112gt.html
https://www.americanmuscle.com/frpp-90mm-tbody-1112gt.html
Last edited:
86GT351
forum member
For the Intake and Throttle Body a TUNE is required. Due to the EPA mess maybe they changed there lingo?
86GT351
forum member
- Fits 2011-2014 Mustang GT with manual transmission
- Original equipment on 2012-2013 Mustang BOSS 302, Ford Performance BOSS 302S and BOSS 302R Race Cars
- Made from light-weight composite material
- Short runners for optimum flow at high rpm
- Includes unique "Ford Racing" intake badging
- O-ring intake gaskets included
- BOSS 302 Intake Manifold Install Kit, Part No. M-9444-M50B, is recommended and includes the necessary production components to complete the installation. (Minor wiring harness modifications required)
- Calibration is necessary to prevent engine damage!
- Calibration NOT included!
- NOTE: BOSS inlet tube does not have provisions for aspirator tube hook up common to automatic transmission equipped 2011-2014 Mustang GT
Yes I figured out that calibration means tuning and I had a tune for it and it’s doing this. I did repin the new connector. It came with blunt instructions that I followed. Double checked after it wouldn’t turn on.
Robert Larimer
Member
- Joined
- May 23, 2019
- Posts
- 368
- Reaction score
- 104
Have you checked for trouble codes on the ECU? Can you verify that the TB is responding to the gas pedal?Yes I figured out that calibration means tuning and I had a tune for it and it’s doing this. I did repin the new connector. It came with blunt instructions that I followed. Double checked after it wouldn’t turn on.
Robert Larimer
Member
- Joined
- May 23, 2019
- Posts
- 368
- Reaction score
- 104
I got bama tunes
And that is the problem
Where should I get the tunes from?
That I cannot say. I bought the SCT software and tune my own.
dark steed
Resident noob
Lito is the man for the 3v engine!
Manuel Pazo (Lito)
[email protected]
www.tudyno.com
Sent from my iPhone using Tapatalk
OP has a coyote.
dark steed
Resident noob
Oops, for some reason I thought he had a 2006.
Disregard the above post please.
Sent from my iPhone using Tapatalk
I will only use JDM Engineering in Freehold, NJ for tuning. https://www.teamjdm.com/
Car will drive better than it did from the factory with their tune.
Sent from my SM-N986U using Tapatalk
Similar threads
Support us!
Support Us - Become A Supporting Member Today!
Click Here For Details
Sponsor Links
