Search results for query: *

  1. T

    Engine Dress Up

    Thanks! I was hoping to see if Brian had the ones I posted about earlier still for sale. Those were really what I was hoping to find. Haven’t heard back yet though, so I’ll keep these other options in mind as well.
  2. T

    Engine Dress Up

    Sent you a PM!
  3. T

    Engine Dress Up

    You have the caps I posted above?
  4. T

    Procharged 2006 Mustang GT Project and Build parts (WPB, FL)

    Bump. Long shot here, is the supercharger still for sale / available?
  5. T

    Engine Dress Up

    Great! Thank you! Does anyone know if the Project 321 billet engine caps are still made or can be found anywhere? Or if there is something close to them? Picture attached Is what they use to make and I've been hoping to find a set somewhere. Picture for attention and what I’m looking for.
  6. T

    Engine Dress Up

    I’m looking for ideas and pictures of engine dress up for my 2007 Mustang. I’d like to do some upgrades but can’t seem to find certain items. I’ve currently got fuel rail covers and intake cover. I am in search of some billet caps for the radiator, brake, oil, etc… Can anyone point me in the...
  7. T

    AN Fittings for Cooling System

    My initial thought was try and dress up the engine compartment and have a custom look while using some great hardware to do so. It seems that this won’t work as good. I know many LS, SBF, SBC engines have thermostat housing with AN fittings and use this idea and that’s what brought this...
  8. T

    AN Fittings for Cooling System

    I’m currently in the process of doing a complete overhaul and build of several systems in my car as I prepare to attend the Ponies in the Smokies (PITS) in 2025. As I look at some options for my car, I’d like to begin the process of completing a wire tuck and cleaning up some other systems in...
  9. T

    Driveshaft Help

    It’s been a few days since I last gave some updates. Took the driveshaft and the new flange / yoke up to a local and reputable drive line shop and had them replace the U-joints at both ends and balance it while it was there. They did an exceptional job and even installed a u joint in the rear...
  10. T

    Pacesetter Long Tubes

    BBK and Pypes are also good options as well. I did spend about $1400-$1500 for my Pypes LT headers and X Pipe last year. They are well built and worth the money IMO. They also are made out of stainless.
  11. T

    Driveshaft Help

    Got the Sonnax piece in a few days ago but just getting around to unboxing it and checking it out. Attached some pictures and it appears to be a really nice unit. I’ll be headed to the drive shaft shop later this week to drop everything off.
  12. T

    Read Brake Rebuild Guide

    I am currently looking for a guide that provides steps on rebuilding the rear brake calipers. I am currently in the process of replacing my brake system with upgraded 14 inch rotors and front Brembo Brakes. Before doing so, I am having all of my calipers finished in Peeka Blue Powdercoat. With...
  13. T

    Driveshaft Help

    Yup. I will be ordering it today and have it installed on the driveshaft this week. When they install it, I’ll also have them put new U-Joints in and balance it as well.
  14. T

    Driveshaft Help

    I haven't been able to find one. I've put this little project on the back burner currently due to some other pressing matters. However, I still believe ordering the Sonnax adapter through Summit Racing may be my best bet currently. Always open for ideas or suggestions on this matter so if...
  15. T

    blowfish shifter bracket

    I reached out to him via email through his website yesterday. I haven’t heard back yet but hopefully I will.
  16. T

    SVE 3 Row Radiator - NEW

    PM Sent
  17. T

    Driveshaft Help

    Thanks! Now to see if I can track one down somewhere. I'm guessing if I can't find one, I may need to just buy the Sonnax Yoke with the 6 bolt pattern?
  18. T

    Driveshaft Help

    Huh. I wonder if I can find the adapter from the 4 bolt to the 6 bolt? Anyone have an idea if I can still get one somewhere?
  19. T

    Driveshaft Help

    Here are some pictures of the numbers stamped in areas of the driveshaft. Also, checked the overall length and it’s the correct length. I’m starting to wonder if I should buy the correct yoke and run with it. Assuming someone changed it out for some unknown reason.
  20. T

    Driveshaft Help

    Upon some additional investigation, I was able to find "Spicer" stamped under the yokes on the ends. So now comes the part of figuring out why it has a 4 bolt yoke instead of the 6 bolt. As I continued some research, I found the link below...
  21. T

    Driveshaft Help

    Gotcha. He informed me it was a Spydershaft which was, from my understanding, sold by Steeda. I could be wrong in this so if I am, forgive me. Really just making sure I order the 6 bolt yoke from Summit, it is all I need. I think I’ll have a local driveshaft shop install it and replace the...
  22. T

    Driveshaft Help

    I recently purchased a one piece aluminum driveshaft from a guy locally. I bought for cheap and it was listed for a 2005-2009 Mustang GT. Based on the extremely low price he wanted, I purchased it however, when I did, I noticed it did not have the correct yoke to mate up to the rear end of the...
  23. T

    Exhaust Help - LT Headers and X Pipe

    Update to my question, I obviously should have looked above the heat shield to realize it wasn’t touching the car so therefore, the header isn’t touching the car which is good. In theory I could remove the heat shield but I have decided on what to do with it yet. I’ve attached a picture for...
  24. T

    Exhaust Help - LT Headers and X Pipe

    Picture for reference.
  25. T

    Exhaust Help - LT Headers and X Pipe

    Well, I almost have tackled this project completely yesterday however, before I starting tightening things down with a torque wrench, I needed to double check some things with everyone here. Fitment - Drivers side is absolutely perfect. Passengers side, close. Has anyone had an issue with any...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top