Separate names with a comma.
Used Broncos are selling for more than list. People are buying them and flipping them for a big profit. The average price for a used Bronco is...
Used Broncos are going for more than new. They are flipping them for a profit.
Yes there are faulty Ford throttle bodies that need to be replaced too. In fact BBK uses the Ford mechanism on theirs. You need to tell them they...
There is no L/R adjustments on the stock headlights only up and down. Are you sure you installed them correctly? You can't really move the bulb it...
Yea I don't want any road noise or vibration either which I've read throughout the years "can" happen with poly bushings. Again, my car has 180+k...
I did not want the increased road noise and vibration from poly bushings so I used the GT500 lower control arms from Ford and they stopped the...
There is no tune that can fix a faulty TB actuator that causes his engine to idle at 2000RPM and throw a P0507 code unless he turns it off and on...
If the larger TB was causing increased flow the problem would have been a lean condition not fast idle. No tune will fix a broken throttle plate...
He had a way too high idle speed and that is not a symptom of a lean condition. It should have been misfiring and running rough like with a vacuum...
Unless there is really a vacuum leak the erratic behavior of your idle is most likely a faulty electric throttle control actuator no matter what...
Tunes are normally only required if the intake tube diameter at the MAF sensor changes. Any increased flow from a larger TB would still be...
The Evap problem is often caused by over filling at the pump. If you changed the purge valve you may have a gas saturated canister. When the pump...
But if you have a stock engine aren't they pretty much the same? Tuning a 4.0 is not the same as a Coyote or even a Cyclone 3.7. The 4.0 is not a...
Damn that is a tight fit. You sure can't say your rotors don't fill the wheel! Nice job.
I was just making sure that I could not have made that sweet conversion like you did. 14" rotors won't fit in my 18" Pony package wheels so I...
The 2 plastic coated stickers are what was put on at the factory. That paper one was probably a oil change reminder put on by a garage. Take it off.
Are those the standard size 14" rotors?
No there is no wiring for puddle lamps before they were made an option in 2013. The mirrors themselves should be the same on a 2010 though.
And it gives you the proper place for the vent. On top of the differential where it should not puke fluid in turns like the stock vents at the end...
LOL is right. The cars start at 350,000 British pounds. That is well over $400,000.
I have not had any problems with those connectors. I wrap them in electrical tape and they are good to go. You do need to use the correct clips...
Just snap on one of these between the + and - wires leading to the backup lights. It is quick and easy. [IMG]...
You mean this?.... It will set you back $75 or you can get a entire new fan assembly that includes this part for about the same price. It's up to...
Those still won't fit an '09. The body panels are different on 2010+. The bodysides are curved not flat.
Do yourself a big favor and pay the $100 for a new fan assembly and put it in yourself. I'm sure you have spent more than that on mechanics and...
