Search results for query: *

  • Users: Max70
  • Order by date
  1. Max70

    Feedback, concerned about temperature.

    Thanks for the info. After a 3 hour drive, I went into the garage and opened the coolant reservoir's cap, also to check if there were still any air pockets left, but the coolant did not boil or bubble up, it just released some air and the coolant inside the reservoir was not hot, just warm.
  2. Max70

    Feedback, concerned about temperature.

    Today I connected my OBD2 and monitored the temperature better. After driving for 2 hours, I found out the following * without fan, AC or heater ON, the temperature goes up to 93/94C (201F) and the radiator fan comes on and drops it down to 90C (194F) *with AC on, the radiator fan comes on and...
  3. Max70

    Information about this part

    Hi everyone, Lately I had to change the engine coolant and took the opportunity to change the thermostat housing too, to the aluminum one. I used this SKP SKRH144D, but since I did not know that thermostats could have different settings, I did not check before installing it. Has anyone used...
  4. Max70

    Feedback, concerned about temperature.

    I changed the housing with thermostat and sensor, I still have the old ones, so I can still replace them (not the aluminum housing) but I would have to take out the throttle body again. When I disassembled the plastic thermostat housing, I took out the thermostat, which was still practically...
  5. Max70

    Feedback, concerned about temperature.

    So, I need a little feedback here as my mind is not at rest. I just changed the thermostat housing to the aluminum one (which included a new thermostat and sensor) and the coolant to blue G-48 (as per my previous post about coolant) Now my concern is that before changing these, I used to...
  6. Max70

    Coolant / Antifreeze brand to use

    I only managed to find Glycol G48 based coolant, I was told that it is also good for the Ford Mustang 06. Other than that I donno what to do :( the valvoline one and another one from FUCHS but both the same bluish green coolant.
  7. Max70

    Coolant / Antifreeze brand to use

    I live in Malta (Island) so everything here is limited, you cannot find all ranges, the agents import some staff which know they will sell in bulks but do not bother about the rest of the ranges.
  8. Max70

    Coolant / Antifreeze brand to use

    In the mean time I checked how much it would cost me to get 3 gallons of Motorcraft GOLD, total including shipping (cheapest shipping cost available ) 125.00 USD and that is without tax and duty.
  9. Max70

    Coolant / Antifreeze brand to use

    I would have to ship it from USA to my country and will cost me alot between shipping, tax and duty costs, just to give you an example, when I got the rear bumper that costs 400 USD, I ended up paying 800.00 USD between shipping costs , tax and duty. (total 1,200.00 USD) This is why I am trying...
  10. Max70

    Coolant / Antifreeze brand to use

    Hi, Before I get jumped upon, I tried to look in this forum, but I had no success in finding what I am going to ask, so kindly reply to my questions or redirect me to a post that can answer my question. I have a 2006 V6 4.0 (hence this section) and I'm about to change the engine coolant, since...
  11. Max70

    Help on specs

    No one else posting measurements? :(
  12. Max70

    Help on specs

    Do you have the particular KW part number you know will surely fit? I also think that the setup I have are SR performance lowering springs with KONI struts, which lowers the car 1.5"
  13. Max70

    Help on specs

    I think I can afford those but the problem is that no shop is taking any responsibility if these will fit my car with the wheel configuration I have, since most of the time the suspensions / coilovers are made to be fitted with stock tires. All I get is that since Mustangs are rare to work on...
  14. Max70

    Help on specs

    MTS KW AST BILSTEIN COBRA These are some brands I know of that local shops have, maybe I can find KONI but nos sure what combination of springs I can use to keep the car low, make the ride slightly more comfortable and not having the car too bouncy so the wheels won't hit inner fenders
  15. Max70

    Help on specs

    I will try look for them but since I am in Europe I might not be able to find that exact brand and model. This is why I'm asking for stock car measurements so I can work out what I need so when I replace mine, the car will get the same height (not more nor less) and maybe a bit more comfortable...
  16. Max70

    Help on specs

    I would like to have a slightly comfortable ride, since as it is its very hard, as I said if you try and push the car down from the fender it won't move at all. I also would like to keep its present height, since it looks good. Higher it will not look as aggressive and lower I will have...
  17. Max70

    Help on specs

    Thanks very much m8, I will keep your measurements as reference, I will try to wait for maybe someone with everything stock (including wheels) so I can have more data to compare to.
  18. Max70

    HELP NEEDED

    I need some help, I am not going to post the thread again, just a link to it. https://www.s197forum.com/threads/help-on-specs.140439/ I appreciate all the help that I can get. THANKS
  19. Max70

    Help on specs

    Hello guys and gals, I need some help on certain specs about suspensions, shocks and springs. I live in Europe so getting things is already hard, frustrating and very expensive over here, so please bare with me if I'm a little insisting on this issue. I also tried the search engine before...
  20. Max70

    Clips

    I'm not sure if this is the correct part number, but these clips are found on this part. Side Front Bumper Bracket Reinforcement Support Cover Replacement For 05-09 Ford Mustang 5R3Z17C861AB FO1026110 I'm also not sure if these retaining clips can be found on their own or only sold with the...
  21. Max70

    Clips

    Hi all, I would like to know if these clips have a specific name so I can check if they are available online from sources such as Amazon or eBay, since I have to find a source from Europe. I need these clips as fast as possible, because I just took out my bumper for re-spray and should be...
  22. Max70

    2006 V6 intake manifold

    I live in Malta, which is much smaller that Cyprus, only 17 miles long. Do you have any suppliers in Europe or you only get things from the US? American Muscle does not ship internationally and CJ Pony's shipping rates are astronomical, Summit Racing I never tried. I always try to place an...
  23. Max70

    2006 V6 intake manifold

    My problem is that I live in Europe, to be specific on a tiny Island, so all these shops and options you mention might not be available for me to find. But thanks.
  24. Max70

    LED lights

    I solved the problem without a load resistor. I tried another brand of CANBUS capped LEDs and they worked perfectly.
  25. Max70

    2006 V6 intake manifold

    what is so difficult with the fuel line? what's the tool needed? Does it have a gasket and if yes how high is the chance of damaging it while removing or re-fitting? I'm asking all this to see how practical it is to take it out and spray it, or try to create a cover

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top