Search results for query: *

  1. M

    Door Panel Fix

    Old thread but i just ordered the Coverlay panels. Thanks for the recommendation
  2. M

    Water leak on passenger AND driver side

    Was able to get the SJB back in today. Cleaned all of the pins with it apart. Pins looked good but not wanting to chance anything. Put the plastic covers back on, added dielectric grease to the pins. Blew out the connectors with air, then used quick drying electrical contact cleaner on them...
  3. M

    Water leak on passenger AND driver side

    Got it out thanks for the heads up on the fuses. Couple drops of water but dried that up and leaving it to air dry for a few days. Appreciate the help
  4. M

    Water leak on passenger AND driver side

    Thank you! Going to work on this later. Really appreciate all the help! I basically just want to dry it out. No corrosion that i can see yet but just worried about water in it
  5. M

    Water leak on passenger AND driver side

    I was thinking about doing that, but some of them are in pretty bad shape. My SJB doesn't look too bad, any tips on removing it?
  6. M

    Water leak on passenger AND driver side

    I know this is kind of an old thread, but just had this problem and wanted to thank VGM for the link to the procedures. My S197 has over 200k miles, original owner and my cowl drain was completely plugged. Pumped 1/2 gallon of water out of the cowl. Luckily the SJB seems good, i think i caught...
  7. M

    Coyote Swap Questions

    So I am getting back into this, seems like I might run the epas if possible
  8. M

    Increase Compression

    Well I don’t know if it would work on a SOHC v6 or not, but a head swap might do what you are asking. On the 4.6 sohc V8 there were 2 versions. Early version had slightly dished pistons and a large combustion chamber. Later versions had pistons with more dish, and a smaller combustion chamber...
  9. M

    Team Z and Steeda Parts Installed

    I’ll get some pics soon. Installed Team Z double adjustable panhard bar with spherical ends the other day. Huge improvement the rear is super tight now. It was the original PHB though it was really worn and I had to cut it out of the car on pass side. Bolt was frozen to steel bushing. Luckily I...
  10. M

    Team Z and Steeda Parts Installed

    Hello, I have a 2006 v6 that we bought new in Oct ‘05. Daily drove it year round for almost 10yr. Have been chasing suspension noises for a while now. A few years ago I replaced the front LCAs with the FRPP GT500 LCAs, new steering rack, front swaybar endlinks, inner and outer tie rods. Also...
  11. M

    Coyote Swap Questions

    Thanks guys for your helpful responses! I was going to keep hydro steering if possible. I was going to get drivetrain from parts farm where they send you everything on a pallet and you can start the engine and run it right on the pallet. Which is great don’t get me wrong, but getting it to run...
  12. M

    Coyote Swap Questions

    Hello, I have a 2006 v6 with high mileage but is in great shape and still runs well. It’s on its second transmission now and the motor is getting tired. I put GT500 front control arms, new steering rack, new struts etc. Car already has 8.8 rearend with Team Z rear suspension, in anticipation of...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top