Search results for query: *

  1. J

    Intercooler Pump Issues

    Jason did get back to me saying "I'll have to figure it out." He needs to realize that not everyone knows as much about this stuff as he does and shouldn't get offended when people that don't know a lot about this stuff ask questions.
  2. J

    Intercooler Pump Issues

    It works outside the car. Inside all wired up is another story. Does that indicate a bad ground?
  3. J

    Intercooler Pump Issues

    I saw very post. Helpful but it doesn’t completely solve the issue. Pump works just as it should when I test it outside the car. For some reason, it doesn’t want to turn on when I put the battery and harness back in.
  4. J

    Intercooler Pump Issues

    I did reach out to the manufacturer but he hasn't gotten back to me yet. When I had everything installed in the car (power to lug at fuse box, ground to passenger side strut tower, trigger to rf noise suppressor), the pump wouldn't run at all even though I'm getting power at both the fuse box...
  5. J

    Intercooler Pump Issues

    Reversed the polarity? I don’t see how that is possible as I was very careful to not do that.
  6. J

    Intercooler Pump Issues

    Just completed the bench testing of my D.O.B Powa Pump. What is happening is very strange. I took the battery out of the trunk. Put the power wire and the trigger wire on the positive post at the same time and the negative to the negative post. Pump runs. However, when I pull the trigger wire...
  7. J

    Metal Coolant Tubes On The Roush TVS

    Hello everyone. Can't seem to find installation instructions for the Roush TVS, specifically the unit for the 2005-2009 Mustang GT. I'm going with 1" lines and need to remove the metal coolant tubes that run alongside the passenger side valve cover. How many different places is it attached?
  8. J

    Department Of Boost Powa Pump Install

    That was the first thing I did. Jason hasn't gotten back to me as of yet. Thought someone here could help with the wiring harness. Heat exchanger and pump are in place, need guidance on the wiring said.
  9. J

    Department Of Boost Powa Pump Install

    Looked there first. Nothing detailing the Powa Pump install.
  10. J

    Department Of Boost Powa Pump Install

    Tried that first. No results.
  11. J

    Department Of Boost Powa Pump Install

    Hello everyone. Seeking advice on how to install the Department Of Boost Powa Pump, specifically the included wiring harness. No instructions came with the kit. I removed the GT500 intercooler pump that was in the car then wondered what to do with the connectors from that harness. Any...
  12. J

    Anyone replace a the positive side battery cable? 05 GT

    I'm in the process of doing this myself. Your post was a big help. One question though, where did you ground the starter?
  13. J

    Stalling On Cold Start After Winter Storage

    I have an Aeroforce Interceptor gauge and just realized that it can read cylinder head temps. Correct me if I'm wrong but if I am getting a reading that means the ect is working properly right?
  14. J

    Stalling On Cold Start After Winter Storage

    The battery was actually out of the car on a little stand I made to keep it off the cold floor, was doing headers and other things. I have an old X3 handheld, can I use that to adjust the idle? Its concerning that the radiator fan is not coming on which Dino thinks indicates a bad ect sensor...
  15. J

    Stalling On Cold Start After Winter Storage

    Thank you for the quick reply Dino. The act sensor is located under the intake manifold, correct?
  16. J

    Stalling On Cold Start After Winter Storage

    Hello everyone. Need help diagnosing a problem. I did indeed do a brief search but didn't find anything that resembled what I am seeing. Took the car out of winter storage and on a cold start, the engine revs to about 1000 then drops to 500. It will eventually stall if I don't apply some...
  17. J

    Header Gasket Age

    Hello everyone. Found a pair of Ford Performance header gaskets when going through a parts bin in the basement. They were made 7 years ago, never been used. Is it safe to put them on the car if the need arises?
  18. J

    Ground Clearance w/Stainless Works LT's

    Not my car but this is supposed to be a 275/40R19.
  19. J

    Ground Clearance w/Stainless Works LT's

    The current tire is a 275/35R19 which is 26.6" tall.
  20. J

    Ground Clearance w/Stainless Works LT's

    I like it. Thor does need new tires as these are 7 years old. Current tire is 26.6 so a 275/40R19 will get me another 1.1 in ground clearance.
  21. J

    Ground Clearance w/Stainless Works LT's

  22. J

    Ground Clearance w/Stainless Works LT's

    Hello everyone. Just curious, does anyone else with Stainless Works LT's have them hang low? My cats are 2.75" off the deck. The car is riding on Roush springs and a 26.6" tire all the way around.
  23. J

    IAT2 and Coolant Temps Are The Same?

    Unbeknownst to me, they (Roush) repurposed the IAT sensor in the MAF for the sensor on the drivers side of the intake manifold. So when I selected IAT in gauge it was actually showing the IAT2 temp, if that makes any sense. If I select IAT2 in the gauge, the number it shows me is the value of...
  24. J

    IAT2 and Coolant Temps Are The Same?

    Found it. Mine is on the drivers side of the manifold. Still don't understand why the IAT and IAT2 are showing the same temp. The little Bosch pump isn't doing enough to move the coolant that is for sure. Will upgrading to the 2013 GT500 pump make enough of a difference? The difference...
  25. J

    IAT2 and Coolant Temps Are The Same?

    I forgot to mention that I don’t know where the IAT2 sensor is. The IAT temp stays right around 115-120.

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top