Separate names with a comma.
With stage 3 RGR heads and that many cubes to fill, I would have thought that they would have selected an intake lobe with more lift to let those...
The added weight of it being a truck and turning (typically) taller & heavier wheels and tires will be the biggest factor here. Without knowing...
With a bigger motor, there is more cylinder volume to fill so basically it will need larger duration events to have the same power band. For...
With a valvetrain noise, you will need to at least pull the valve cover to inspect it. Unplug the Coil-on-plugs, remove the Coil-on-plugs, then...
Why is this an issue? The first part is obviously yes, the second part is just chassis dyno bench racing bullshit, who cares?
Are people actually in disbelief of this fox body? Plenty of 2018+ mustang GT's with longtubes and free-flow exhaust making 450+ at the wheels....
That is a very thorough walk through. How much time did it take to write it all down?
Comp's camquest was one that I played with years ago.
It would be nice if you could enter the duration figures at .200" lift to get an even better idea of the difference of how much the valve is open...
https://mgispeedware.com/camshaft-calculator/ I haven't found one where you can overlay 2 different cams.
Many 5R55 transmissions have died from full throttle downshifts out of 5th gear. If you want it to survive, click it to whatever gear you want...
The 127450's have 16.5 degrees of overlap @0.050" lift, the 350's have -2 degrees @0.050" lift. The 127350's close the exhaust valve sooner so...
Gen 2 went to the mid lock cam phasers, so you could retard or advance the cams rather than the Gen 1 and 3v retard only phasers. Cams and valve...
They are revised, it is the same head as the 2016+ GT350
The 2018+ is the Gen 3 truck motor, rated at [email protected]/400 ft-lbs @4500 It has direct injection/port injection, spray bore lined cylinders,...
These cars are 400-700lbs heavier than a fox body so the extra torque over the pushrod 5.0 isn't as apparent, no big revelation there. I couldn't...
With a not so efficient On3 70mm turbo and a .96 exhaust housing, 3000 would be excellent spool characteristics. With my stock motor, it took to...
When did it spool? What sized turbine housing? The On3 70mm isn't known for its spool time.
9.4 is plenty safe. Less than that, it will feel doggy until you are into the boost. As for cams, lots of people will say you need either turbo...
As Midlife stated, no need for sealant under the bolt head, just a small dab needed to seal the keyway to the balancer. With the lip on the...
Heat gun and a spray bottle of ispropyl and water is your friend. Razor blade for removing the glue after a good spray with isopropyl. I can't...
Since the mid 2000's I have been saying the 5.7 hemi is a great motor, just wish they built a better truck around it. You can say the exact same...
I used a tack welded stock one. Other than the 2 degree adjustments on my TFS timing gear crank sprockets, there was no way to do fine...
Glad to hear! Sucks when something small causes big problems. I chased gremlins all of 2018 with my new motor build and it was a broken primary...
I hope the 6.8L pushrod rumors come to bear fruit.
