Separate names with a comma.
Thanks for posting the Energy Suspension link. I had assumed Prothane, which is quite different. A big press and careful supporting of the arm got...
Bought some front LCA's from another member, along with other stuff. The LCA's came with red urethane [Prothane?] bushings already installed....
Installed a prothane bushing kit in the upper control arm due to clunking from the rear axle. The job was tedious but never exceedingly difficult....
Will wait to check camber after finishing the job before ordering new bolts. On the side I've already changed over, the half-moon at the top of...
Bolt fits snugly into the 14mm gauge hole, but not into the strut. I could probably drive it through with a light rubber mallet. Too thick a coat...
Accidentally posted this on the 4.0 forum... The Koni part # is 8750-1030. Diameter of the mounting bolt is ~14mm; its threads go into the...
In the midst of a suspension refresh for the '07 GT. When attaching new Koni STR.T front struts to the steering knuckle, I find that the oem Ford...
Mine came with the Steeda pulleys, installed in 2011. No problems. I asked DOB if running a smaller S/C pulley would compensate for smaller crank...
Helps to make sure your drill bit is centered; the larger the hole, the greater your chance for success. For rounded bolt heads use the Irwin...
As a new guy, I don't know whether DOB ever posts here; they are vendors but haven't updated lately. Here's an excerpt from Roush tech, answering...
Since I've been looking for S197 S/C's - about 8 months - there have always been a few M122's on FB or CL within 5-6 hours of home. Many more than...
In an earlier life I was an English teacher, so complete sentences come naturally to hand. It looks like quite a few of the members here are also...
"New guy" here: Justin at DOB has been very helpful with all kinds of questions, including some not related to his products. That said, I can't...
Got the stock mufflers from oldVOR. They were delivered in a very clean white 08 GT/CS with sweet-sounding Borlas. Now installed, and they sound...
Thanks for all responses. It turned out that the reek came from the remains of a deer that a hunting buddy had field-dressed near the end of our...
PO of my 07 GT vert had a big new storage building, but it was not tight enough to keep out rodents. She's been here 2 months. Yesterday I took...
It does hit the 90's around here about 10-15 days/year, but the bigger concern is what happens within the system after all components are...
Have written to DOB asking for help getting just that combination together. There are some GT500 bits for sale on the FB site now, but it seems...
https://www.departmentofboost.com/tech/#3v-tech Good stuff!
It's pretty clear that PD is what I need. The budget dictates used, so there's this: what kind of vendor support is there for one to install and...
Looks like every member's favorite is the one he has. Since M122's are plentiful and relatively cheap, one of those - or other 2.3 Eaton-based...
Recently bought an 07 GT M5 vert with JLT, UDP, LT, catless x-pipe, and 3.73's. With a canned Bama tune it's pretty strong above 4500 rpm to the...
Expect to have a pair of Flowmaster American Thunder as soon as I pick up some stockers from another member in about 2 weeks.
So it looks like the Volvo swap is a nonstarter for all sorts of reasons. That leaves the S550 option, but apparently no one on this forum has...
PM sent to oldVOR.