Separate names with a comma.
I installed the Steeda pulleys about a year or so ago. I like that I didn't have to change belts. I live in Michigan, but I haven't had any...
Thanks, all. Good advice.
The other day my nephew's friend asked for help using an easy out screw extractor on the friend's Jeep CJ. I drilled the hole appropriately,...
We bought a 60 year old house, and I've upgraded most things in the house. Plan on everything taking longer and being more expensive than you...
Concur w/ Juice & DieHarder. Peanut butter is easy to use and highly effective. The Tom Cat plastic traps work pretty well for me. They caught...
Free, online shop manual for your car at http://iihs.net/fsm/?d=1. I use it all the time; it's very easy to use.
I found some rodent repellent spray at a home improvement store that seems to work. It's peppermint and cinnamon, so my garage smells good. It's...
I think you're right, stevbd. The pin on the pad out of alignment with the piston notch is the most likely thing that would make the pad contact...
You can try saving the calipers by cleaning the sliders and the slider holes. Pull the rubber boots and clean them out with an old tooth brush....
Roger that on methylene. Have you considered a heat gun? https://www.dewalt.com/products/power-tools/specialty-and-other-tools/heat-gun/d26950...
I'm not sure. Someone told me that my rims may have been plastic dipped. I guess you could try the stripper on an inconspicuous place and see if...
My best advice it to leave them alone. Polished aluminum looks great when it's clean, but it's going to require constant cleaning. Your wheels...
Not sure what you mean by fan blades. I used the Dremel 320-Grit Finishing Abrasive Buffs with some Soft Scrub or rubbing compound to remove the...
Yes. Maybe I'm a dummy, but it I spray the dirt out of it before/after the wash. I haven't noticed any scratches in the finish. Rog. The only...
I recently acquired a Doca Pole Car Cleaning Kit. It has definitely made it faster and easier to clean my 08 GT. The 5-sided scrub brush is...
Stupidity abounds. Oregon forced Mike Udink to turn in his plates in 2007 because the last four letters could be a racial slur against Asians....
I've had two foxbody 5.0 with all the NA bells & whistles. Power just drops off around 5,000 to 5,500 rpm. Maybe if I had a racier cam? Anyway,...
Activated charcoal will probably work best.
Beautiful car. I would recommend you stick with the stock 18" wheels. You have more brake options with 18"
Thanks - that's pretty much what I thought....
I figured that was probably the case. Sad.
My only mods are pulleys & shorties. Very rare that I get near max rpm. Thanks!
I know the forum preference seems to be JLT Series III, but has anyone tried the Airaid MXP Series Cold Air Intake with Yellow SynthaMax Dry...
beautiful!
I've been happy with my 08's parking brake. Pressing the brake pedal while pulling the lever helps. As far as the noise, buy a two or three foot...
