Search results for query: *

I wish I could have one of these. It was nice just to see one in person. 20181017_134817 by ILW84U posted Oct 18, 2018 at 10:32 AM 20181017_134824 by ILW84U posted Oct 18, 2018 at 10:32 AM 20181017_134640 by ILW84U posted Oct 18, 2018 at 10:32 AM

12 Rib Procharger pulley set up c/w ATI Damper. Came off my 05. Should fit 05 - 09 but may also fit 2010. $700.00 plus shipping. Located in Alberta, Canada so shipping by postal service is probably the cheapest.

More rumors but 600 HP N/A sounds pretty good. http://wot.motortrend.com/1409_ford_shelby_mustang_gt350_to_get_5_2_liter_flat_plane_crank_v_8.html

I am putting my car back to stock & want to sell my Procharger kit complete. I am looking for the stock takeoff parts for the cooling system. Coolant tank, lower rad hoses & upper thermostat housing. I also need the PVC hose & the hose coming from the passenger side cam cover. PM me with what...

My car was finally delivered at 4:30 PM so I will have to wait until tomorrow to take delivery. I doubt I will be getting a good nights sleep tonight. :drool:

Well this morning I put down a deposit on a 2013 GT500. Orders will probably go out March 1. At least I will get it at MSRP and not some inflated price. After 3 years of screwing with the 05 and only putting about 3,000 miles on it because of issue after issue, I figured 650 HP and just turn the...

Now that it has finally stopped raining, I was able to wash the new truck & get a few quick pics. So far I am loving it. I have to take it to the track because I think it will do as well as the Mustang did when it was stock. Pretty impressive for a 6 cylinder. The real test will come when I pull...

Here are some pics of the carnage that can happen when your cats plug. Pistons & cylinder 8. Pistons & cylinder 7.

As the title says, looking to buy some billet gears for the 4.6 3V Vendors too please.

Sorry for the long rant! Last Year I started my build as seen here and needed to complete a few things for this year. I was getting nowhere out of the hole with a 2400 stall converter so I got a 3500 stall from PI. Then a friend (DirtyDogOfTheDesert) decided he was parting out some of his mods...

I have been trying to diagnose a problem for the last little while & am getting nowhere. When I step on the gas pedal normally the A/F pegs on rich & the car bogs or stalls. If I am very, very easy on the gas, the car runs fine. I cleaned the MAF & there was no change. I replaced the MAF, no...

Here is a vid from a Street Car Shoot Out event held at our local track this weekend. 7.71 @ 196 MPH This is 07 GT twin turbo on drag radials http://www.youtube.com/watch?v=0e02_TMMKgo&feature=player_embedded 0e02_TMMKgo&feature=player_embedded Sorry I tried to embed this without any...

Finally got my car out to the track after fixing one problem after another. It's a built tranny (don't know by who) with a Lentech manual valve body & transbrake. During my burn out the car seemed to be missing but came back on. I got my best launch of the day 1.628 60' and when I hit second the...

I had Eric Brooks tuning my car yesterday & at about 5000 RPM my fuel pressure was running low. I am running the GT500 dual pumps with a MDM Zone 5 driver module & 60lb. injectors. Pumps duty cycle, MAF etc were not maxed out. We switched out the MDM module for the 2 Ford FPDM system & the issue...

I am looking at picking up some of the Race Star wheels but I am not sure if I should get 15x8 or 15x10. I am going to be using MT ET Streets (bias ply) but I'm not sure which size would be best for my set up (see mods below. Running 3.55 gears). I am considering 27x10.5-15, 28x11.5-15, or...

Well I finally made it out to the track after my latest build (see sig for mods) & the various issues solved. To say the least, I was disappointed as my best run was a 12.19 @ 118.90. The car was leaving the line like Granny was driving! It was my first time out with an automatic. I tried...

I and another fellow in my area have run into the same issue with similar builds & could really use some guidance. While on the dyno doing some driveablity tuning (cruising at 50 MPH in 3rd gear, 2300 RPM) both headers started to glow red. A/F was running between 14 & 14.5. We thought we may...

Just wondering if anyone knows what the OSS needs to be changed to so the speedometer reads correctly in a manual to 4R70W swap? From reading the thread posted by GIJOE on his automatic to 4R70W swap, his required the "# of holes in the OSS" changed to 6 in his tune. Thanks.

Yesterday I went to get my car tuned after my engine build & upgrade to the Procharger D1 & we ran into some issues with the MAS pegging out at around 4100 RPM. This was with a MAFia extender. We tested it with another MAFia, same result. Test with another stock MAS, same result. It looks a...

I plugged in all my electrical connections since the motor swap & I have one connector I have no idea where it belongs. It is on the drivers side harness with all the coil & injector wires, at the end (front of the motor). I recall another similar post in the past & searched. What I found is...

I know there has been many posts regarding the fit of these wheels on the S197 but I have found a different outcome than others. My son just bought some of these wheels PN: 555-67077 for his 02 GT & we figured we should give them a try on my car. Well there may have been some changes on the...

Started the rebuild a short time ago & figured I should start a thread. Thanks to the board members who had some spare parts for me to purchase & Livernois for the quality product & exceptional customer service. Out with the old. There she is Empty engine bay...

I am wanting to get the bung for my widedand O2 sensor welded in before I install my American Racing headers. Does anyone have a pic they can post up that shows a good location? I have searched and couldn't find anything specific to AR headers. I am using the AR catted H pipe with this set up &...

I am putting in a new motor this winter & will put in a tubular K member while I am at it. I was just wondering what are the advantages & disadvantages of using the 1/2" lowering member?

I am going forward with my next major mod & need some opinions. It's time to increase the boost & a motor that will handle it is a must. My current mods are in my sig. Below is the list I have come up with. I know I can get away with not doing heads & cams but I only want to do this once...