Search results for query: *

All parts will fit 05-14 Mustangs. If you want/need/would like more pictures of a specific item you're interested in, let me know. BMR Rod/Rod Watts Link - $300 + Shipping This was on the car for a couple years. Rod ends were replaced last year and it comes with the upgraded billet pivot...

FRPP CJ Monoblade - $500 + shipping. Switched to a twin 65MM as the monoblade wasn't playing nice with the FRPP Control Pack calibration. Purchased used with about 10k on it, I used it for less than 5K myself. FRPP CJ CAI, with painted black (tuxedo black, I think) intake tube $225+ shipping...

I installed a kit this weekend to delete the A/C stretchy belt on my Coyote; unfortunately, the belt included in the kit is a touch too long and I think it's because of my 05-10 A/C Compressor. I'm trying to figure out what sized belt or idler pulley I can use, so I need the Coyote A/C...

I'm looking for an FRPP Twin 65mm CJ throttle body. I have cash in hand or a monoblade available for trade. PM me with what you've got.

SP070 Lowering Springs - 10-15k miles and around 6 months on the springs. 1.5" drop on GT500s, ~1" drop on GT cars. $150+ shipping TCA021 adjustable lower control arms. Poly/rod end. Less than 5k miles. I realize one of the rod end spacers is missing in the picture. I couldn't find it...

The screen on my X3 is no longer working properly. It's giving me an inverted and flipped image, so I'm unable to read anything on it. I called SCT and they want to charge me $150 to replace the screen and I don't want to dump $150 into a 6 year old tuner. Does anyone have any clue as to where...

All parts have been on the car for 8-12 months or so and are in good conditions. All bushings, ball joints, etc... still have plenty of life left and have been maintained every 5K miles with a synthetic grease. 11-14 Non-adjustable, standard ball joint a-arms, AA021 $400 + shipping 11-14...

Looking for a full set, front and rear springs for my car. Would prefer Boss or Bullitt, but will take a set of GTs as well. Let me know what you have, shipped to 48124.

Like most people, my SJB has some corrosion on it. I have a replacement SJB that I'm wanting to install that has 0 corrosion on it. I want to be clean the harnesses that plug into it since they have corrosion on them. I can't think of a good way to do this other than soaking them in a baking...

On Sunday I was informed that my brake lights weren't working by another driver on the road. I checked the fuse in the SJB and it had popped. I replaced it with another 10A fuse and it popped as soon as I hit the pedal. I tried unplugging the brake lights and tested again to see if there was a...

I'm going to be swapping to an MT-82 in my car and I'd like to ditch my 4.10s and go with 3.55s. I'm sure there is someone around here with a 3.55 rear end that wants 4.10s, so why not save us both a few bucks? I have a rear axle from a 2008 GT with 4.10s professionally installed by a...

I have a buddy who is giving me a set of stock Boss cams for my Coyote. Right now I'm running F150 cams, so the Mustang cams will be a pretty decent upgrade. Being that the Boss and GT share the same intake cams but have different exhaust cams, I'm wondering if I should upgrade at least my...

Boss 302 25mm rear sway bar, coated BMR hammertone. Comes with new bushings - $100 + shipping 3V throttle pedal - $60 shipped GT500 a-arms, 50-60k miles, ball joints and bushings still good - $100 + shipping Stock Bullitt H-pipe, OTA, axle back - $250 for all open to offers, willing to split...

Bought this off a friend and decided not to use it. It works perfectly. It can monitor a ton of different parameters, read and clear trouble codes, can be set up as a warning light, etc... $175 shipped

BMR MM007. Had these on my car for 8 months or so. $100 shipped. IMG_0402 by Dylan Abbott, on Flickr

These are a direct replacement for your OEM tail lights. They come complete with their own wiring harness and sequential LEDs. The only things you need to reuse from your stock lights are the reverse light bulbs and the retaining nuts. The lights come packed insanely well and look even better...

My brand new aftermarket TOB crapped out on me this weekend and I need to replace it. Has anyone compared 05-10 throwout bearings to the 11-17 throwout bearings? Ford has two different part numbers for them and two VERY different prices. The 05-10 is $240 and the 11-14 is $100. McLeod has a new...

I have stock Bullitt axle backs, H pipe, and over axle pipes available. I would prefer not to ship the over axles or the H, but will on the buyers dime. The H-pipe is different from a GT and gives a unique sound over a stock GT H-pipe. The axle backs have a slight dent on the passenger tip...

Excuse the Mustangforums question, but my dipstick tube absolutely will not lock into my valve cover. It's a brand new tube and dipstick, but no matter what I try it will not stay put. It won't work it's way out during normal driving, but if I try to pull the dipstick the whole assembly comes...

I have a 2008 Premium GT with the info center built into the cluster. After my Coyote swap, I keep getting a message to check the gas cap. Even with all the evap stuff deleted in the tune, it keeps happening. We are thinking that it has something to do with IC not getting a signal that it is...

3V Powered By Ford engine cover. $60 shipped 08/09 Bullitt CAI/FRPP CAI. This is a factory Bullitt CAI which is the same as an FRPP CAI. $200 shipped Bobs Autosport catch can. Comes with PCV fittings, ready to hook up to a 3V engine. $100 shipped

I have run into a bit of an issue with my swap. My PS bracket has my hard line that shoots off the pump and straight into the sway bar bushing saddle. Has anyone ever rotated one of these fittings successfully? I am worried about damaging the fitting and it leaking afterwards. The line I'm...

Looking for 11-14 axle back hangers, both front and rear. Please PM me a price shipped to 33584.

I'm sure many of you are aware I've had nothing but valve train issues from 3V motors. Stock or modified, they just don't seem to like me. After having 2 separate issues in the last 3 months, I've decided that 3V life ain't for me! Instead of trading the car in and buying a Coyote, I've decided...

Looking for a stock shifter. Please PM me with price (shipped to 33584) and pics of the shifter.