Search results for query: *

How about your new motor mount kit, - MM007 - Motor Mount Kit, Polyurethane Bushings?

Yes Jon's car he is about to get it dialed in, still a little soft on the 60' but ran some ok times. Your car was rolling out good so close to the 5's you might need just a little more mph to get there but I do like to see the 3v doing work.

Car looked and sounded good, I was there helping my buddy with his twin turbo mod motor fox.

Here's a couple things to check look on your oil filter for any black power that will be from belt slip, also open the intercooler tank with the car running you should see the water/coolant moving if the pump is working correctly. It sounds like you have a 3.6" or 3.4" pulley. I would look at...

What size pulley are you running on your Saleen supercharger and how much boost are you seeing, have you checked for belt slip, and make sure your intercooler pump is working, something is not quit right on your numbers. I ran those numbers in my Saleen when it was stock with the pig rich...

Guys, I am looking at upgrading the LCA's and UCA on my 2006 Saleen to help with 60' at the track and better traction on the street this is what I am look at right now, does this look like the right direction or any advice from you guys running after market LCA's and UCA would be very helpful...

Congratulations on the WIN 3V doing work, I was there in the 06 white Saleen convertible parked behind you. Two of my friends also enter the shootout the fox body with the 5.4 turbo and the Silver Cobra. It was nice to see a Ford win at a GM shop, they tried with the Corvette it was a Grand...

Who makes the hood, and how does it fix, is the underside finished?

Thanks guys, Greg how hard is it to install the new pump in the factory hat and will it work with the BAP or do you recommend I just remove the BAP once the new pump is installed. Also I am guessing I would need to get a new tune once the new pump was installed, do you know if Pro-Dyno could...

Anybody ever used the Walbro Mustang High Performance Fuel Pump Assembly http://www.steeda.com/store/walbro-2006-2009-mustang-high-performance-fuel-pump-099-TU282HP-2/ I was looking to upgrade my fuel pump to handle a little more boost and ran across the Walbro pump. I have a 2006 Saleen...

My old 85 GT, you have to love a track that let's you run top down.

VIR

Went to our local 1/8 mile track tonight and had a new PB. 2006 Saleen convertible mods Brenspeed tune 3.4 pulley KB BAP Kooks long tubes and catted h-pipe Saleen extreme CAI DSS drive shaft Race Stars Here is the time slip, I am car 103

They are 275/60/15 MT ET Streets, my best 60' time is a 1.58, but most of the time it is 1.6x to low 1.7x 60'.

Ready for a night out on the town And ready for a trip to the Drag Strip

Installed a MGW shifter and a DSS drive shaft today on the Saleen and went for a fun test drive.

Looking for a DSS 05-10 MUSTANG GT 5-SPEED AND AUTO 1-PIECE ALUMINUM SHAFT WITH CV 900HP 3-1/2 ALUMINUM / 1350 shipped to 27410.

Pm me price for aluminum DS on 06 GT manual please.

Cars & Coffee this Saturday—October 20th 8:30-10:30am Jefferson Village in front of “The Fresh Market” off New Garden rd. Greensboro NC

Congratulations on a new personal best, I was a little shocked when I saw you run a 7.55, your car looks and sounds stock. I was also at Farmington saturday running in the 8.00 index class.

I was shocked with the 1.62 60' also the car is a manual with the stock Saleen suspension which is more setup for road racing than drag racing, the track was working good for me on saturday I was leaving between 2800-3300 rpm and riding the clutch just a little then going WOT and the car would...

Our local 1/8 mile track had an all ford day today, I figured it was a good time to test out the drag radials. My car is a 06 Saleen convertible with a 3.4 pulley, Kenne Bell BAP, V10 water pump pulley, Brenspeed tune and Kooks long tubes headers. Best pass of the day was a 7.67 at 92 this was...

I have an 06 Saleen with almost the same mods you have, 3.4 pulley, Saleen CAI, stock fuel pump with a Kenne Bell BAP, and 39lb injectors. I average 17-19 city and 22-26 hwy, I am running a 5 speed but also have 3.73 gears. It sounds like you are running to rich, I would look at getting a new...