Search results for query: *

Thanks, Wolf302, for correcting my bad info (blush, blush). Jay Dee: Sorry, I misread your post and was responding about axlebacks, not a catback. No resonators on the OTA pipes in an aftermarket catback. Gotta go to remedial reading class now... Chris

07 Roush, Nope. The resonators are in the tail pipes (from the mid-pipe to the axleback joint). If the previous owner installed over-the-axle (OTA) pipes then the resonators are gone. HTH, Chris

Chris1, Is anti-theft kicking in? Maybe the key is not talking to the anti-theft system. Got a spare key? If you have a clutch there is a switch near the top of the pedal that prevents anything from turning over if it is not pressed. It may be out of place or not working. That's about...

Carnage5oh_s197, Best method is a physical test: * Lift the rear wheels off the ground. * Put a mark on the driveshaft and put a mark on teh inside of one rear tire. Masking tape works nicely. * Rotate the driveshaft, counting each revolution, until the tire has made one revolution...

What "Forty61" said. Rear is too angular, hood has very little drop until the last foot or so, the rectangular digital screen is an eyesore, and the S650 is very heavy. This looks more like a refresh than a re-engineered vehicle. Nice HP but it must be generated at something north of 7k RPM...

Steve Shaker, I'm in full agreement with Pentalab and I am a happy Vorshlag customer. The c/c plates are very well designed, construction quality is top-notch, and the customer service is awesome. These plates can be adapted from strut/spring to coilovers so if you plan further suspension...

NovaKane, You need to find a wiring diagram for the headlight harness. Haynes/Chilton's manuals have wiring diagrams. There is an e-shop manual stickied in the forum and there is an electrical section available. edit wiring diagram: "https://iihs.net/fsm/?d=711&f=085 - Headlamps and...

TonyGS197, No direct experience but it is odd to me that both ends are leaking. How many miles on the car? If there are a lot, you may want to get a one-piece driveshaft, or, see if a local transmission shop can provide new boots. Not a lot of help but something to think about. :) Chris

Sorry, RED09GT, I did not click on your link prior to posting a reply. :oops: Travis: NM about the grease. Chris

Travis, Welcome to the forums! Your shop should know this but polyurethane bushings should be lubed with silicone grease (like SuperLube) and NOT with a conventional grease as the hydrocarbon version will degrade the polyurethane. HTH, Chris

Dougmore: Not sure if this will help but... from the tascaparts.com site: "Oil Tube - Ford (BR3Z-6754-B)" for the 5.0 L 4V engine https://s3.amazonaws.com/rparts-sites/images/996a7fa078cc36c46d02f9af3bef918b/d67366a15c8ab9509ca45de4445648c9.jpg (Not sure if the link works but you can...

Gt197, YMMV but... My car came with the Ford package (non-adjustable struts and shocks, P springs). I added FRPP front and rear sway bars and BMR LCAs, LCA relocation brackets, panhard rod and brace. I added FRPP bump stops but cut the top nub off. I also just added Vorshlag caster/camber...

vxr500, Sorry for the duff info about bluaero - he used to make splitters and that's why I had him bookmarked, lol. I guess there's not enough market for the 10-12 model years. Would Rally Innovations make you a customized splitter? A phone call to them might be worthwhile. There were...

vxr500, I changed out my RTR splitter for the Boss lower valence but when I searched for GT solutions, I found the following sources: MRT (shopmrt.com), <--- no, requires CS lower valence, sorry; 101bluaero.com (Facebook), and SBS Performance Parts (Facebook) I hope these will be helpful...

Vandal, I recommend the combination of Wolfgang's "Perfekt Vision" glass cleaner and a Glass Master triangular-shaped tool that has a microfiber pad that gives good access to the corners and keeps the cleaner off the A-pillar covers. The tool is not mandatory but it focuses the cleaner where...

SOLD!! SOLD!! SOLD!! S197ers, Selling my second-hand 3” Kooks axlebacks. The axlebacks are in excellent condition and have low miles on them (about 300 by the first owner and <200 by me). Part no. 11406600 to fit 2011 to 2014 Mustang GTs. $325 shipped to the lower 48 states. Thanks for...

S197Forum-ers: Nothing major but finally eliminated a squeak in the rear. Pretty audible in the cabin but not so audible outside. Tracked it down to the urethane bushings of the swaybar endlinks (FRPP s/b installed a while ago) at the sway bar end. I had greased them when I installed the...

2012 GT, just ready to hit 27k. chris

decableguy2000, Not sure if this is the part you need but Tasca sells this (same number for right and left sides): Sleeve - Ford (6R3Z-5L302-A) HTH, Chris p.s.--Loled at Mr. Fair's quip. :D

Yosep, Check the cabin filter drains (under the hood, passenger side, lift the cowl cover (carefully). If the drains are plugged then water can drain back into the cabin into the junction block and cause some havoc. Look at the connector at the headlight. Any corrosion or discoloration...

Matt Norris, Check out Diode Dynamics for bulbs. I just ordered 4 (reverse lights) for my '12. Should be delivered this week. Chris

ghunt81, Can't help with paint color but I have another suggestion for you. How about calling a mobile wheel repair outfit? They'll smooth out the road rash, repair any divots, and color-match paint the wheel to the original paint (spraying the whole thing). "AWRS" is Alloy Wheel Repair...

otani25, The "corner carver" sub-forum has a treasure trove of info and Terry Fair/Vorshlag posts frequently, offering a ton of helpful advice based on real-world track experience. I'm not a Vorshlag Kool-Aid drinking fan boy but I do appreciate a vendor and enthusiast sharing hard to come by...

759-OR, I'm keen to see the response from Steeda. Not much help other than a little personal experience to share. Fearless Leader is quite correct. Dashpot adjustment will do the trick. I used SCT's ProRacer program to tune my '98 GT and took care of things like: adjusting the dashpot...

Awesome! Thanks for the Consumer Report, Jeff. I will be happy to buy you a cold beer or two if you get to Missouri anytime. :beer: Chris