Search results for query: *

  1. SSPSTANGBANGER

    Degree Stock Cams Locked Out ICL method

    Ok I have searched and seen lots of guys talking about what they degreed their aftermarket cams to with lockouts but no one has talked about where to set the ICL on stock cams when using lockouts. I am putting a 3V in my 2001 F150 and thus have to use lockouts because it will be running on the...
  2. SSPSTANGBANGER

    Factory 2011-2012 Mustang HID lights pair $550 shipped!

    Set of nice factory hid lights complete with ballasts ready to plug and play. Came from my 2011 gt/cs that got totaled(frame damage) they were not touched in the wreck at all. I had planned to put them in my wife's 2011 but we are going to sell her 2011 and get her a new truck so no need for...
  3. SSPSTANGBANGER

    Wtb stock coyote t-body

    Well turns out those dudes on eBay I bought a nto intake and t-body from ain't got the t-bodies after all So I got Jason(onebadgsx) stock intake now but I need a t-body. Who has one available? I PM'd the offer made for $80 shipped in my last thread but no response yet. Anyone else? Trying to...
  4. SSPSTANGBANGER

    Wtb stock coyote intake and throttle body

    Looking for stock intake and throttle body and intake cover for my 2014 gt I sold my stock stuff and need some more stock ones now since going turbo. This is going on a new built sleeved engine in a 3,800 mile 2014 so I am looking for clean nice low mileage parts. Thanks, Rick 271-731-8oo8
  5. SSPSTANGBANGER

    Congrats on the Record Pass Terry"Beefcake"

    Congrats bro I saw you made a record 8.18 pass
  6. SSPSTANGBANGER

    Wtb: stock coyote rods set of 8 - not boss

    Looking for a cheap set of takeout coyote stock gt(not boss) rods in good shape. Want to use them on a budget build hyper piston 4.6l. Just want a little better than stock 4.6l rod but not heavy like boss rod. Lmk what you got and how much shipped to 77363/tx or picked up in Houston tx area(if...
  7. SSPSTANGBANGER

    2015 5.0L bare block

    can you get them? if so how much and how soon?
  8. SSPSTANGBANGER

    S197 VS Pine Tree!!

    Dead center pine tree Shoved haptic balancer into oil pump and broke them both! Pine Tree 1 S197 Mustang 0 Lol Look how well this thing took the impact The car is toast but if this was a fox or an chassis this dude would have been DEAD All the more reason to feel safe in our cars :)
  9. SSPSTANGBANGER

    N/A 5.0 Auto Mike Rousch is DaMan!!!!!!!!!!!

    OK I had my car tuned buy another well known tuner. It has had tip-in issues and idle recovery issues and bucking in gear while cruising etc. So after many disappointing trips to track with tune issues and it never running and faster than 1st pass off trailer in November of last year, constantly...
  10. SSPSTANGBANGER

    Manley H-beam Rods for 4.6 or 5.0 5.933"

    Sold
  11. SSPSTANGBANGER

    Coyote Cobra Jet Nitrous Kit 100-400rwhp and extras

    I have the Cobra Jet plate kit I built available now since I am going turbo. It is all high quality parts and is a plate kit capable of flowing 400+rwhp. Solenoid a are good for 700hp and plate is good to 500rwhp(jets are there for 100-250) It's new parts $500 for plate kit minus a bottle. It...
  12. SSPSTANGBANGER

    WTB: Stock Coyote Parts

    Looking for some stock parts for a buddy of mine putting a Coyote in his Fairlane. Needs: Valve Covers Coils(purchased-silverpoison) Cam Sensors Looking for used in good usable condition and as cheap as possible too :helpme: LMK what you guys got and how much. He is located in Katy, Tx
  13. SSPSTANGBANGER

    SSP's 900+RWHP Turbo Streetcar

    Figured I would make a build thread for the new Combo/Motor going in my car. It a 2014 GT Premium A6.(currently only 2,300 miles) I tore it down with 382 miles and cammed, longtubes, CJ, Bassani AB, Rev Auto CAI, Circle D, built and braced rear w/Detroit & 3.31's, One-piece D/S, Strange 10-ways...
  14. SSPSTANGBANGER

    5.0l Coyote Shortblock 30k miles

    Sold
  15. SSPSTANGBANGER

    5" CAI for CJ intake 11-14 gt

    Sold
  16. SSPSTANGBANGER

    2014 Cobra Jet Plate Kit build

    Well I am supposed to have my NX plate today finally(been waiting 6 weeks for it already!) Since there is no kit for the CJ coyote yet I plan to build one with the best parts I can within reasonable cost. Here is the plate: The Nitrous Express GT 500 Nitrous Plate Conversion features a billet...
  17. SSPSTANGBANGER

    13 GT500 Bumper on 13 GT

    My buddy wants to do the swap to a GT500 bumper on his 13 GT. I know it fits and he will need a upper grill and bumper and fogs but anyone know if there is more needed or is that all that required?
  18. SSPSTANGBANGER

    Lightweight brake rotors

    Anyone used these? http://performance.importrp.com/i-1734747.aspx?gclid=CP-Kntalwr0CFTMV7AodkRIAUw http://d5otzd52uv6zz.cloudfront.net/3802a318-cde9-4e1d-9622-8bdc9d0a23dc-800.jpg Part #:DBA52124BLKS T3 5000 Series Rotors Uni-Directional Slotted Rotor Anyone know how much lighter they would be...
  19. SSPSTANGBANGER

    FRPP GT500 oil pump 3V Failure under 5 miles

    I just put a GT500 oil pump kit for a 3V from FRPP in a fresh built forged motor in my buddies 08 Roush STG3. Pre-lubed and primed the motor started it up it ran smooth idled great no issues. Burped the coolant system revved it a few times(under 3K rpm) all looked good. Drove t to the end of my...
  20. SSPSTANGBANGER

    Wtb 2013 5.0 timing cover

    Looking for a 2013-2014 5.0l timing cover. 2011/12 won't work with the pbh accessory kit we are using on this coyote swap Lmk what you got and how much shipped to 77363/tx Thanks,Rick Sent from my iPhone 5S
  21. SSPSTANGBANGER

    Cracked Coyote Cam follower roller

    anyone ever seen this before? I am trying to figure out how a 81K mile automatic stock car would have been able to do this
  22. SSPSTANGBANGER

    Lightweight front brakes?

    OK I have a buddy buying my 92 Coupe Saturday so I am going to buy some lightweight front brakes for my 2014 GT next week. I was wondering what you guys have and how much weight savings you got and how well they hold up and stop. It is a full interior premium GT with bolt-on suspension/sway bar...
  23. SSPSTANGBANGER

    Wtb s197 caliper brackets

    Looking for s197 caliper brackets that bolt to the housing and hold the caliper cage. Maybe someone has a set they took off to do c-clip eliminators???? Lmk what you got and how much shipped to tx. Thanks, Rick Sent from my iPhone 5S
  24. SSPSTANGBANGER

    19" Brembo wheels and tires 10k mile take offs

    Sold
  25. SSPSTANGBANGER

    Lots of stock parts off 2014 Gt 380 miles!

    These parts were all pulled off my 2014 @ 383 miles. Driveshaft with hardware $150+ shipping Stock springs $50+ shipping Stock k-member $50(local only) Stock rear lower control arms $20+ shipping Stock rear upper w/bracket $20+ shipping Stock rear sway bar with links and hardware $50+ shipping...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top