Search results for query: *

  • Users: ksack
  • Content: Threads
  • Order by date
  1. K

    6R80 Damage. Help ID the Cause

    Tore into my 6R80 (14 F150) to do Stage 2 clutches and a new TSS Intermediate shaft to prep for going turbo. Everything looks fine except for the pressure plate in the low clutches. These galls/spalls are consistent around the entire part and I have no idea where they may have come from. Any...
  2. K

    11-14 6R80 4k+ stall converter

    WTB stall converter (4k+ RPM) for 11-14 GT/F-150. Prefer Circle D 5C but will entertain other options. For bone stock engine.
  3. K

    2014 P0345/P0349 Help!!!

    Have a 2014 F-150 motor in my project truck but wiring is mostly same same. I've been having cam sensor issues for about a year now. Main codes are P0345 and P0349 for the CMP21 sensor. The truck runs and drives fine once moving, but I'm unable to get up on the 2 step beyond 2500 rpm and I think...
  4. K

    Coyote Swap Tune Issues

    Long story short- I have an 86 Ranger with the guts of a 14 F150. Did a full drivetrain and harness swap. With that, lots of sensors and whatnot were deleted. I am having an issue revving the transbrake beyond 2500rpm. There appears to be some sort of limiter within the tune that won't allow it...
  5. K

    Ksack is buying his first house!

    First a little about me. I'm 26, have no debts, 760+ credit score, fly for the Air Force, and am moving to Clovis NM. I'm looking at a moving day around the end of January. Currently in a training course with flexible graduation dates so closing would start the day after I complete the course to...
  6. K

    Coyote Drivetrain Question

    Im doing my research on a build I want to do but I can't find the answer to this. Applies to mustangs or F150s with a 5.0. I need to know the drivetrain alignment so I can get the axle housing shortened on the recipient car. Since the input shaft isn't centered on the diff housing, how do they...
  7. K

    2.9L V6 w/T5 and much more!

    I have a 2.9L V6 with the accompanying TK-5 for sale. Came out of my 86 Ranger project with 175k miles. Needs a new water pump (bad seal) and the PS pump needs a new reservoir (plastic nipple broke off). Other than that it comes with all the accessories, unless you don't want them. Ran great...
  8. K

    Can I get a measurement?

    I'm looking for some dimensions on the EPAS unit. I'm looking for: -the distance from the edge of the boot to the edge of the opposite side boot -the distance from the end of the tie rod to the oppsite side tie rod Thank you in advance! I'm trying to see if this will work on a swap I'm...
  9. K

    Drag Truck - The Danger Ranger

    After being project car-less for almost 2 years to the day, I finally got to a point where I have the time to tackle something new. I picked up an 86 Ranger XLT Long Bed with the 2.9 V6 and a 5 Speed this morning for $300. He was running straight water in it and forgot to change it out before...
  10. K

    Need MT82 measurement

    Running numbers for a 5.0 swap into my 97 Ranger. I need the length from the front of the bellhousing to the attachment point of the shift linkage. The shifter from the M5OD is only 18" from the bellhousing so I suspect I may need to fabricate a remote shifter that is forward of the attachment...
  11. K

    Spec Clutch, JBA Exhaust, Subwoofers

    ***Updated 30 Nov 15. Subs are gone*** Hey all, finally settled in after moving and a TDY (TAD for you Marine types). These are the parts I have left from my de-mod. All are for 05-09. Prices are for local pickup. Message me and we will work out shipping. Located Albuquerque, NM 87106. Please...
  12. K

    Clutch, Exhaust, Woofers, Oil Gauge, GPS

    Just got my new assignment so I will be PCSing soon and need to get rid of these parts. All parts came of a 06 GT with about 15k miles on them unless noted. Prices are for local pickup in Del Rio, TX. Will ship at buyer's expense and can meet halfway if you are close. I'm reusing the old...
  13. K

    Ksack's Moving Sale

    ***Unavailable until April 18*** Just got my new assignment so I will be PCSing soon and need to get rid of these parts. All parts came of a 06 GT with about 15k miles on them unless noted. Prices are for local pickup in Del Rio, TX. Will ship at buyer's expense and can meet halfway if you are...
  14. K

    KSack's 06 Part Out Consolidated

    All parts came of a 06 GT with about 15k miles on them unless noted. Prices are for local pickup in Del Rio, TX. Will ship at buyer's expense and can meet halfway if you are close. I'm reusing the old pictures from my original ad so please ignore the dates. Open to Offers Spec 3+ Clutch- $200...
  15. K

    Stumbling at lower RPMs

    06 GT with 31k miles. Just returned fully to stock. It runs through the whole RPM range smoothly, but stumbles between 1500 and 2500 when holding the RPM constant with no load. It gives some grumbling and the car shakes a bit. Under load, the car stumbles almost as if there is a lot of slop...
  16. K

    Magnacharger TVS1900 Intercooled Kit

    Updated- also includes colder plugs For sale is my 95% complete TVS1900 Intercooled kit for 05-09 Mustang GT from Magnacharger. Includes the full kit, bolts, hardware, original instructions, 6 and 9lb pullies, billet idler pulley, and a JLT carbon fiber intake. SCT Tuner will be included if...
  17. K

    WTB Stock Radio

    Need a stock head unit for 05-09 Mustang. Non-shaker only please.
  18. K

    Need someone with part call out access

    Have this laundry list of random fasteners I need and obviously the ford dealership was less than helpful and won't give out specs. They also wanted to charge up to $8 a bolt and I say screw that. I need 3 part numbers completed and specs for all the parts so I can get them from Fastenal. 2006...
  19. K

    WTB stock fuel hose

    Need the hose that goes from the fuel line under the master cylinder up to the fuel rail. 2006 Mustang GT. Please PM me so I get the email notification.
  20. K

    ksack's 06 Part Out Sale!

    ksack's 06 Part Out Sale! UPDATED 29 July Everything is off the car. Please note that my work schedule is very fluid and can change at any time so there is a chance I may not be able to get items shipped until the following Saturday. All prices are shipped and gifted. I ship with USPS unless...
  21. K

    Stock shifter part

    Got what I need thanks!
  22. K

    Garmin Nuvi 2595LM

    For Sale. Located Del Rio, TX 78840. Unfortunately my work schedule is such that I will only be able to ship things out on Saturdays. Garmin Nuvi 2595LM. Includes GPS, suction mount, and mounting disk. I haven't used this thing in about a year, but it worked the last time I did use it...
  23. K

    Passport 9500ix

    SOLD
  24. K

    Headunit, speakers, amp, custom subs

    For Sale. Located Del Rio, TX 78840. Unfortunately my work schedule is such that I will only be able to ship things out on Saturdays. Kenwood Excelon KDC-X995. CD player, USB receiver, Bluetooth phone connectivity, Pandora compatible, microphone for hands free. Comes with remote. Wired for...
  25. K

    Autometer Gauges and Pillar

    For Sale. Located Del Rio, TX 78840. Unfortunately my work schedule is such that I will only be able to ship things out on Saturdays. Autometer Pro Comp Ultra Lite Boost Gauge Model 4301 SOLD Autometer Pro Comp Ultra Lite Oil Pressure Gauge Model 4327 $SOLD Autometer Pro Comp Ultra Lite Water...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top