Search results for query: *

I am using HT0's in my supercharged 2006. I want to replace the plugs. I have been reading that the design of the plug strap has changed over the years and some have reported issues with the strap breaking off. Is this still an issue? Is there another option for HT0 plugs? Thank you.

I am looking to replace the headlights on my 2006. They are just looking tired. Ford says the part number for the right side headlight is 4R3Z-13008-AA (discontinued). LMR says the part number is 7R3Z-13008-C. Ford says that part number is for 2007-2009. Left side is a similar situation. Is LMR...

Good evening, I am currently using MT ET Street R Bias 28x11.5x15. They are on back order until???? Has anyone tried these: https://www.mandhtires.com/M-H-Drag-Tires/M-H-Racemaster-Cheater-Slicks/28-12.5-15LT I have a 10 inch rim...

Who is using them and why? Why didn't you just use off the shelf cams? Has anyone used Todd Warren NA SVT Camshafts for 3V cams? Long story short, I have a friend who says that when I am ready, I should use custom cams from Todd NA SVT Camshafts who will spec the cam to my specific application...

I am hoping someone here has some experience that they can share about 3 valve fasteners. 1. Are cam cap bolts TTY? If so, is there really a need for ARP bolts http://www.modularmotorsportsracing.com/cart/index.php?main_page=product_info&cPath=4_7_45&products_id=821 or studs...

Has anyone used them to freshen-up or port heads? Opinions? I am looking at their stock head package and it's a $1000. Does that sound about right? https://www.modularheadshop.com/i-24493045-4-6l-5-4l-3v-freshen-up-cylinder-head-package.html?ref=category:1268098 Thank you.

Can it be done with a full weight, street driven, pump gas, 3-valve and who here is doing it? What is your formula for getting there? My current set-up (tvs, auto, drag radials) runs mid 7.30's to low 7.40's (depending on weather) on about 8lbs. of boost. My guess is that I have about 450...

I don't have my engine apart yet. It runs fine (no issues like low oil pressure or noise and has about 60,000 miles on it). The engine has a stock crankshaft and I believe that is plenty for the expected horsepower level. When I freshen up the engine, I will be putting in new rods, pistons, and...

I am thinking about putting a Circle D converter in my car (2006 4.6 with 6R80). I want to stay as close to a consistent 7.5 seconds in the eighth mile as I can. I currently have a stock converter and the car runs in the 7.6 seconds (cool, low humidity night) to 7.8 seconds (normal night) range...

What are you guys using for IHRA approved seat belts? Apparently, at my local track, I can run 7.35 without a roll bar but I need seat belts below 7.50. I have factory seats and the rule book says the crotch strap can go in front of the seat. How are you mounting the crotch strap? Also, can I...

Kenne Bell Boost-A-Pump that came with my Brenspeed 560R kit. Comes only with what is pictured. I removed it when I upgraded to GT500 fuel pumps. I don't know the amp rating. There is a 15 stamped on the bottom. $150 plus shipping. I am open to offers. McLeod braided clutch line. - Sold. All...

It looks like I will to get a tach signal from my '06 for my 6r80 install. I will be using Baumann Quick 6 controller and they recommend installing an Autometer Tach adaptor #9117. How reliable is that tach adaptor? Is there any other other options for getting a tach signal? I am wondering if...

I tried to get a response from American Muscle but they don't seem to visit here. I am posting my question here in case someone can help. A. http://www.americanmuscle.com/alumin...ft-1114gt.html B. http://www.americanmuscle.com/frpp-o...ft-1114gt.html What is the difference between these...

I am looking at these two driveshafts on your website: A. http://www.americanmuscle.com/aluminum-driveshaft-1114gt.html B. http://www.americanmuscle.com/frpp-one-piece-driveshaft-1114gt.html What is the difference between these two driveshafts? Aren't these both made by Dana? Why is it that...

Like the title says. I will be rebuilding my 4.6 soon. The point of the rebuild is to make more power. I talked to Lito and he thinks for my goal of 550 hp (or somewhere close), I might need to be as high as 14 pounds of boost. The car has a Roush supercharger and is drag raced and street...

My current drag rim/tire set up includes a pair of SVE Gloss Black 15x10's (https://lmr.com/item/SVE-10071652H/Mustang-SVE-Drag-Wheel-15X10-Gloss-Black-05-14) on the back and my street tires (18" AMR's) on the front. I think I want to try 17x7 Darkstars on the front for the look. Does anyone...

Does anyone know what pinion seal comes with this kit: https://www.tascaparts.com/ring-and-pinion/ring-and-pinion-installation-kit-8.8/m-4210-b2/ ? Is it the same seal that you would get over the Ford parts counter...

Up for sale 2006 non-seat air bag OEM Black Leather Front Seat Covers. Included are the the back and bottom seat covers for the front seats only (no foam, back seat covers, or headrest covers). These were removed from my vehicle when I installed seat covers from a 2014. When they came out of the...

Is there any update on when the SVE Drags in gloss black will be back in stock? http://www.latemodelrestoration.com/item/SVE-10071652H/Mustang-SVE-Drag-Wheel-15X10-Gloss-Black-05-14 Thanks.

The quick question: What fuel injectors come with Roush's Tuner Kit and 550hp TVS kit? I have not held every popular injector in my hand. Is there an easy way to identify the most popular injectors? Thanks for the help.

I have been thinking about about doing a manual to auto conversion on my '06 GT. I have not made any decisions yet. Of course, now I have found the parts to do the swap for $450 and it is from a local seller. Currently, my car has a 3650 transmission. The parts for sale locally include (all...

My winter mod list includes replacing the stock 3.55 gears with 4.10's. I have been hearing a whine coming from the rear axle housing for awhile. I took out the carrier, gears, and axles and I saw nothing unusual. I was going to write it off as gear noise. I was talked into rebuilding the...

I have BMR LCA relocation brackets (CAB005 - http://bmrsuspension.com/?page=products&productid=170&superpro=0) on my car. Do I need to change or modify anything to add BMR sway bar relocation brackets (SRK001 - http://bmrsuspension.com/?page=products&productid=187&superpro=0)? Thanks for the help.

Like the title says, if running a stock location panhard bar, which rear end girdle fits without modification? I tried to contact TA with email but I have had no response. If anyone has pictures, please post. Thanks for the help.

http://www.hotrod.com/features/1411-is-the-et-street-dead/?adbid=10152366336067540&adbpl=fb&adbpr=13601527539&sm_id=social_aumoautomobilemaghub_AutomobileMag_20141105_35033957 Does anyone know if there has been an update on this? Are these available yet and if not, when? I am very interested...