Search results for query: *

AM is truly the Pep Boys of online Mustang parts store. Like someone said above, about 10 years ago they used to be PHENOMENAL...and you won't hear me say other wise. Now? They're polite when you talk to them online, but ordering crap and hoping that whey they say the part is in stock, it...

Got bored and had some burnt copper paint in the garage. Also, pulled the hood blanket off and re-dyed that as well (picture was before I did that). Going to pull off the TB and paint it as well this up coming weekend. I also have some Brembos, a 2018 manifold, Kooks Axle back, Roush side...

Hey, been awhile since I've posted, but have a couple of questions. Getting ready to thoroughly clean my 2011...it's been sitting out in the sun for some time and 100K on the clock. Trying to get it back to looking the best it can. I'm picking up a some new pieced and getting the bumpers...

I've pretty much had the same experience with AM over the past couple of months on several boards...Completely non responsive. I used to love them and their customer service was great. Now it's taken a crap. If they are non existent on the sites any more, why do they still have a section? I...

OK, cool...I greatly appreciate it. I apologize, I didn't know that was an option.

Hey, Steve - I've tried to message you from another site as well as e-mail you (not sure if it went to your spam folder or something). But would it be possible to get quote for the following? All should be for a 2011 Mustang GT. (I believe the part numbers are correct) Roof Trim Molding...

I appreciate it...they've finally contacted me. Hard for me to make calls during business hour.

I submitted what I thought was a tune revision request the first part of last week (request #5494150) and I re-filled out all the info it was requesting again and explained the issue I'm having....would like to see if I can get it addressed.... I haven't heard from anyone from Bama yet. In the...

Picked one of these up. Now that I have it in my hand, it makes more sense. From the picture and what little I read, it looked more like an actual pen and I was thinking the paint came out of the tip. Again, I appreciate it...Gonna try and get the touch up done this weekend.

I appreciate it, gentlemen.

Ah, OK....I was wondering what you were talking about cause I've never used one of those and didn't realize it had an abrasive tip. My only concern is, how can I see if all the rust is removed if it's covered up with paint? Or from looking at it, can you use it without any paint in order to...

A paint pen like people do arts and craft crap with? The chips on my hood aren't bad, but I have one on the roof about 6" back from the windshield that's got some rust in it and the paint around it is a bit faded looking.

I have a couple of rock chips that I've been meaning to take care of, but for one reason or another just haven't gotten around to it. I've read a couple of thing about taking some sand paper (not sure what grit) and using a hole punch to make a little dot of paper to put on the end of a...

I've been trying to do some searches, but looking for feedback from anyone who has upgraded their 2011-14 to the 2015 GT or EcoBoost PP Brakes? Before anyone says "it won't fit" http://blog.dashengst.com/2016/03/03/s197-4-piston-brakes-for-under-300/ I'm curious if it's worth the time and...

Crank Relearn procedure resolved the issue. No CEL to date and several WOT passes have been made at this point.

Totally get that. I honestly would have thought it would have thrown SOMETHING given the significance of the flashing CEL is supposed to be. Anyways...I've done a few more slow climbs up to 5K RPM and still no CEL of any type. Also, MPG has increased and is back to where it was before the...

Did the Crank Relearn last night. Had to set the car back to factory tune and then the x4 froze up loading the tune back up so I had to redo it. That was the hardest part.... On the way to work this morning, I did a bit of a "step" test up to 4500 rpms slowly in 2nd gear....no flashing CEL...

Dude, we could probably share horror stories concerning this. I went through a year long process with my wife's car (resulted in a trashed motor while in their care) and now this BS with my car..... I'm finding it hard to have ANY faith in anyone touching my car...so if I can do it myself, I...

Yes, the installer of the engine (was at a Ford dealership). I would have thought they would have done this....but then again, I'm finding lots of "little" things I would have thought they would have done. I'm going to try and do the Crank Relearn through the SCT x4 ASAP. This was something...

Engine has 7K miles on it so I don't think its a plug or fouling since there are no codes. I did attempt to pull the plugs though. However, the installer neglected to put any form of anti-seize on them so I haven't been able to pull them (I've tried letting them soak in PB Blaster over...

I've been doing some searching on this but haven't really come up with anything solid. Car is a 11" GT with CAI, Steeda Catted X pipe, flows and running a Bama 93R tune. For the first month or so after I loaded the tune, the car ran great although consuming more fuel than I would have...

OK, if I can put was on top of it...I can just try it and it there is not enough shine, I'll just toss some wax over it. I know you mix it, but I'm assuming that the 500ml is enough to do several cars? Greatly appreciate, sir.

Question...on that Hydro2, do you use it with or WITHOUT a wax? I'm assuming without, but didn't see anything saying either or. I'd like to use this on the whole car, but curious what kind of shine it puts on.

I appreciate it. I'll look into both. I'm still a couple of weeks out from putting the wheels on so if I do go with the product from over seas, as long as it doesn't take a month I should be good. I just can't imagine trying to apply dlux to these wheels....I'd be pissed after the first one.

OK...been a while since I've posted in here, but I've picked up some Chrome SVE Series 3 wheels. They have the mesh spoke look to them and I really like them....but I'll have to admit, I haven't installed them yet and I'm already dreading the cleaning. I know CQuartz Dlux is supposed to be...