Search results for query: *

Anyone know if the clutch and flywheel from the 2018 GT are backwards compatible with the 11-17?

I bought this car and it was dark when I did, and was 'impressed' with how the black paint looked. Then daylight came haha! I said I'd never buy a black car again because of swirls etc but here I am. I was just wondering if someone could help me out with their buffer and knowledge, and show me...

Are there any road race tracks or at least autocross tracks near me? I'm about 30 minutes from Destin, FL. I'm moving to the area Jan 1st for military PCS (currently in Japan) and can't really find anything except drag strips. Was hoping someone on here knew of a local course I could start on.

Was considering buying this 2005 GT for a temporary car. New trans in it and sounds solid, only thing I hear is this and I can't identify it (not the injector tapping, has a rattle or something if you listen closely). Thanks for any info. https://youtu.be/fZKZVHyGpog

Here's the hat: http://www.on3performance.com/shop/2011-2014-cnc-billet-mustang-gt-5-0-4v-fuel-hat/ It looks like a quality piece. The only thing I don't like is that it only supports the "320 series" pumps, which I'm assuming means you can't go any bigger than a 320lph pump, although it does...

Are there any that read in decimals? If I'm hitting 9.5 I want to see 9.5, not just 9 or 10. I don't want a mechanical one again because it's too hard to get a reading when you're wot and trying to see what you're at right when you shift. Just wanting something easier to read at a quick...

Don't know how else to describe it. Added the 3.33 pulley, K060994 belt, and the beefcake wastegate with 10psi spring. Did a datalog and without even getting a new tune Lund said he was happy with the log so I didn't get a revision. This is happening under partial acceleration as well as WOT...

What wheel width would I need to run these? http://www.tirerack.com/tires/tires.jsp?tireMake=Continental&tireModel=ExtremeContact+DW&sidewall=Blackwall&partnum=23YR9ECDW&tab=Sizes I currently have 19x10 2013-2014 GT500 track pack replicas on the back and that's not going to cut it. I...

I waxed my car the other day, and at the same time my girlfriend got the mothers back to black out that we had just bought for her explorer and used it on the trim around my windows. My trim now has white lines all through it and just a faded white look in general lol... Soooooo... That makes no...

I used the eagle 1 surface prep mitt (like a clay bar) to get the contaminants out, then applied this Nu Finish "polish" (actually is a sealant I believe). This is only my second time ever waxing a vehicle. How does this bead look? It started to rain lightly for about 5 minutes and when it...

Are the ones on the 11-12 the same as the 13-14? I found a used set for $100 and am going to pick them up if they'll mount in my bumper like the 13-14 gtcs so I have fog lights again lol (deleted them with the high flow Roush upper grille)

So when I put on my pypes "super system" catback, They stuck out way too far for my liking. I took it to an exhaust shop to have them try to cut some pipe off right behind the tip and move it back some. Easy enough right? Well now the tips aim downward. I've just been living with it for a few...

It is sooooo badass. Lol. Just thought I'd share hahahaha My clutch pedal loves the floor now after I do a pull. Guess I need to remove the helper spring? It hasn't gotten stuck to the floor or anything, but it is kind of getting sucked down there. Is the clutch spring the problem solver...

As you can see my bap didn't come with the boost controller and other voltage controller boxes or whatever they are. Do I just tape those off and tuck them away, and only worry about connecting the 2 reds and 1 ground?

Which tuner would you go with on a manual Paxton car and why?

I got the UCA attached to the mount, and the mount is all installed, but the end of the UCA that attaches to the axle is too long. I shortened the UCA (I have the adjustable one) to it's shortest position and it's still too short. Does this mean the axle shifted forward even with the...

I was installing my front lowering springs and when I went to disassemble the mount from the strut it came apart and the bearings fell out lol... Is this normal? I know they're one time use but heard of people reusing them, didn't expect them to be such a low quality piece that they'd actually...

In the process of installing my BMR lower reloc. brackets with LCAs, UCA with Mount, adj PHB, and front and rear 1.5" drag springs. Got all but the UCA & Mount and front springs done. Reason I stopped is the UCA takes a 240 ft-lbs wrench to get the bolt under the rear seat loose lol... I have a...

Prefer:: Paxton/Vortech/Procharger centri EDP or JPC single turbo Used kits only, at used prices. Don't need fuel system or tuner, base kit only. PM with kit price shipped to Mount Vernon, IL 62864

After reading through about 18 pages of the "Please weld your axle tubes..." thread, I just really wanted a single, condensed version of the steps to complete it correctly. I read some posts about heating it up, then doing the weld, then wrapping to cool slowly etc... Is that the gist of it? Any...

PM lowest price on unlocked trinity tuner. Currently have a locked x3 and my tuner I'm planning to go with only remote tunes for diablo tuners. He recommended the trinity for more datalogging capabilities I guess.

I was just about to buy this one and thought I'd ask (since it's $172.05 after shipping... pretty high) what you guys are using? http://www.harborfreight.com/2-ton-low-profilelong-reach-steel-heavy-duty-floor-jack-with-rapid-pump-68050.html The thing I like about this one is it's low profile...

Anyone using this currently? I know nothing about tuning... But curious how easy this software is to use. I've always wanted to know how to tune, but I don't think it's a good idea to start learning on this car. Especially since I have twin turbos possibly coming in spring. Would I have...

Anyone with the roush grille have any good looking emblems? I like the way the saleen badge looks on the 10-12 with the red O.o Just curious if anyone's done any neat custom stuff :thumb:

Very rarely will I take it to the track, and it will be a DD. The roads aren't too bad around here, but I do cross rail road tracks every day... they aren't bad tracks though. I picked up the BMR 1.5" drop drag springs. I'm currently on 19" GT500 wheels and have 285/35/19 Continental DW tires...