Search results for query: *

20190530_075106 by Benwhite911 posted May 30, 2019 at 10:53 AM Is there a reason I would see this?

Well, it's about that time again. This V6'er hasn't asked a stupid question in a while so I getting a little restless. If everyone could be so kind as to read the whole post first, then you can all take turns beating the sh*t out of me. I've been reading up a little on increasing compression...

73 mm Ported Throttle Body. This seems like it might be a good alternative to the BBK 70 mm. I haven't tried it, but I wanted to make sure others know about this option. https://www.ebay.com/itm/PORTED-FORD-4-0-V6-THROTTLE-BODY-2005-2010-MUSTANG-F150-EXPLORER-TB-/253739823211?hash=item3b1412706b

Looking to buy 2 305/35r18 tires. Not picky about the brand, and they can be used too.

Since I need to replace the automatic transmission in my V6, I been checking out ebay for used and remanufactured units. Non of the listings ever outright say that the listed tranny is for years 05 06 only, or 07 up only, however in reading he listings, it seems to hint to that it may only fit...

Who here know what the lockup RPM is for the 5r55s in the V6?

I was reviewing a list of modifications someone had made to there 2015 3.7, and one of the was a the throttle body. He claimed to have installed a GT Throttle body on his V6, and I wanted to get a consensus on whether or not that's possible.

I need to replace my auto tranny in my 05 V6. I'm looking for a new or rebuilt one; or possible a use one. If I consider a used one, it would need to be in excellent shape, and price would need to be worth the risk of not having a warranty or guaranty. I would also need a Torque Converter.

Ok, I was in the process of changing out the cabin air filter yesterday, and I broke the case that it sits in. Anyone who's replace one of these knows that the case is what the filter gets put into, its own little housing if you will, then reinstalled into the car. Yeah so, instead of just...

I unfortunately was given the news that my auto transmission will need to be replaced. Since the old tranny will be removed, I figured this might be a good time to look at doing and auto to manual conversion. I understand the the 05 to 10 V6's used the T5, but I also understand that that...

I think I'm going to be getting a 2017 S550 convertible, and I wanted to know if anyone has removed the rear bracing. They were always in the way on my 05 convertible, so I removed them. Just wanted to know if they can be done away with on the current model.

I ran over this screw this morning. It's right in the meat of the tread, so just wanted to get some thoughts.

So the 5R55S is not all that back as far as automatics go. However, mine is starting to make some worrisome noises, and actions that are prompting me to be proactive in transmission replacement, instead of reactive at the worst moment. So last week I was in Ft Myers FL, and I rented a 2017 V6...

I'm going to be leaving the Northeast section of the US, for Ft. Myers FL, hopefully soon. I have lived in Florida before, but only as a kid so I wouldn't know anything about state vehicle emissions laws. My wife who had live in FL around 2000 informed me that there are no state inspections...

Hello All, I've been noticing something over the past two weeks, and since it's not going away, I should probably address it; that's what I've been told a smart person would do. Well, like the title indicates, I'm getting a bit if a delay in my brakes when they are applied with harder than...

Other than sticking it were the sun don't shine. What could someone with a 4.0 V6 do with an 90mm MAF housing? It's the front part of a Roush CAI and I'm impulsive but I figured I'd see if something could realistically be done, as far as a Do It Yourself CAI.

I hope this is the right forum to post this in. Does anyone have, or know of a Licence Plate Holder/Bracket that can be put on the stock front bumper of an 05 to 09 V6 or GT? In some states, from plates are required and the really don't look good just thrown on. I know of one particular licence...

About a month ago, I was having a conversation with one of my friends who has far more automotive knowledge than I. Just to set the stage, when I modify, It's bolt on. When he modify's, welding is always involved. We were talking about the modifications that mustang owners typically make and...

I am looking to buy a set of Front Lower Control Arms that do not have any bushings or ball joints installed. Everywhere I look, I can only find complete assembly's. These can be OEM style or an After Market Product, as long as the bushings and ball joints are removed. I have this desire to...

When changing the filter in the 5R55S transmission, I noticed when searching for replacement filters, you can opt for one that is externally mounted. I found a Motorcraft filter that mounts up on the line from the transmission to the cooler. This would seem like an ideal replacement to have...

I need to replace the convertible top on my car. The rear window has become completely separated from the outside layer, and any fix I do, is only temporary. So I'm looking for a Tan/Camel Top to replace mine with. It can be used, but the rear window needs to be completely sealed, and overall...

I have 2005 V6 and I'd like to get a used C&L Cold Air Intake. Well, I'd prefer new, but I can't justify paying 269.99 to my wife, on top of all the other additions I buy for the other woman in my life. I have a tuner with preloaded tunes for C&L, JLT and Steeda, and I prefer a C&L because it...

Has anyone replaces their Rear Differential Housing Bushing themselves, and if so what tool or tools did you use to remove the old one? I have found a few tools on ebay that are listed as tools for the job, but I've never removed a bushing before, so I wanted to get you all's take on it. I've...

Has anyone replaced their rear bump stops on the axle with polyurethane ones? I had planned on doing this for some time now and found these in the link I have attached. Please feel free to weigh in. http://www.usautoparts.net/details/Univ/Prothane/Bump_Stop/PTH191318BL.html

Hopefully within the month I'll be installing Longtube Headers in my V6. I've been kicking around the idea of wrapping them up in heat wraps that can be found on American Muscle, and the likes. It appears that wrapping them up is far easier to do before installing, so just trying to figure...