Search results for query: *

  • Users: Mustangk
  • Content: Threads
  • Order by date
  1. Mustangk

    Milkshake Oil mixing with coolant after drilling exhaust hole to helicoil/tap.

    So my question is what i need to replace to fix this and how to drain the engine and intake and exhaust or whatever is contaminated with this milky milkshake. i drained it all right after it happened and filled with new oil to drive a block home from where i noticed a problem. So how i think...
  2. Mustangk

    How to use mighty vac to bleed clutch

    Can someone explain in detailed oriented with a drawing or picture of how the mighty vac works to bleed air out of clutch lines when you connect it to the cap. Do I need to use the canister HALF FILLED with fluid with a HOSE inside going down into the half filled FLUID, which sits IN BETWEEN...
  3. Mustangk

    14.3v only after battery reset. Drops to 13.3v running

    my battery only will stay at 14v or 14.3 after 1st engine start after resetting battery. Then drops down to 13.4 when I turn off engine and go to start it again. Can someone point me to ho directions on how to start using the multimeter to figure out wheree the problem is. The cars seems to run...
  4. Mustangk

    Will 2010 catalytic con. And manifold fit a 2005 ?

    Will 2010 catalytic con. And manifold fit a 2005 ?
  5. Mustangk

    coolant gauge pegged high not overheated.

    seemed as tho my cooling gauge pegged to high and the car wasnt really hot ? i took off the cap coolant and there was some smoke but that seems normal for taking the cap off right after shutting engine i couldnt get the cooling gauge off peg high until i pulled off the negative terminal to reset...
  6. Mustangk

    Midmount muffler Leak after h pipe cause p0430?

    I have a 2005 stock GT with 91 always at chevron live at sea level in cali. Can a leak after the h pipe cause a p0430? I just installed, was playing around with welding/learning to weld, magnaflow resonators right after the h pipe on the DRIVER SIDE ONLY because I didn't have time to do other...
  7. Mustangk

    Is 1.20 LTFT bad lean condition and/or fuel problem or normal ?

    so i have stft that hover around .9 and then my ltft is at 1.20 which if im not mistaken means 20% correction to add fuel. how does ltft work on my sct x4. i want to understand what 1.20 means for ltft as i understand the stft of 1.00 is perfect and mine hovers around .9 but the ltft will...
  8. Mustangk

    idler pulley snapped off doing a power slide u-turn

    so there i am waiting for the red left light to turn green and i rev the rpms up and let go of clutch as the turn light turns green and all i hear is tink tink tink as apparently my ?idler pulley?{i think thats what its called} falls to the ground and bounces into the curb, KEY NOTE HERE: the...
  9. Mustangk

    p0171 p0174 diagnosis symptoms troubleshoot lean condition

    cant get rid of p0171 and p0174 had some other issues that led to replacing tb and pretty much a fresh primary and secondary ignition components overhaul. Sct noticed tunes stacked ontop of each other possibly causing issues I got Ford to reflash pcm to stock. after battery reset car runs...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top