Search results for query: *

  • Users: whitmanink
  • Content: Threads
  • Order by date
  1. whitmanink

    motor and pipes

    heres my 91k motor i got , i also go $200 shortys headers that fit great(ebay) ,, only thing i had to do was ream out 5 holes a hair and she slid right on,, welds look great,, it was a tight fit as you can see in pic (very close to frame,,, ) and you cant see it but very close to steering shaft...
  2. whitmanink

    stock engine mount

    hey guys,. just go my headers in the mail and im ready to put my engine back in, and i now cannot for the life of me find my engine mount bolts,, of course i have the nut on the threaded rod so im good there but i have no clue where them bolts are,, 2007 ford mustang engine mount bolts -...
  3. whitmanink

    anyone know this part and if its important

    getting my engine all ready to go back in , i noticed i cannot find the second one of these i had ,, i know i need two of them cuz my pics showed one on the left and right bank of the timing cover, what are these and can i run the motor with just one or is it bad and should just wait til i can...
  4. whitmanink

    heater hose o-rings?

    hey guys. my heater hose connector (under the inkake manifold 09 2009 Ford Mustang Heater Hose Connector - Climate Control - Dorman, Genuine, Replacement, SKP, Engine To Heater - PartsGeek )) what orings can i replace with>? the ones on now look reddish orange ,, i have black ones here...
  5. whitmanink

    what motor do i have>?

    hey guys hope all is well,, today i got my engine , off a AA auto on ebay , when i got the motor , the add said 05 06 07 08,, i dont know what year it is tho,, and if i have the dreaded spark plugs,,? i can see the intake is 2 piece cmcv , the heads have an 05 stamped on them at the...
  6. whitmanink

    replacement clutch ???

    hey guys,, my new motor is on its way , due here by mid next week , having it all apart , i figured nows the time to do the slave , tob ,and master cylinder,. and of course pilot bearing,. now heres where im lost,, both say for our year car, one is a 10 spline, another is a 26 spline...
  7. whitmanink

    engine block ???

    so im trying to find a block to build , and alot of ones im finding are complete mustang engines with 160+ miles on them,, and want 2 grand . (no thanks) so a guy local here has a 01 4.6 block thats out of a truck or suv ,, this is good cuz i can inspect the block good before i buy so i...
  8. whitmanink

    compression questions

    soo im looking into how i want to go about this 3v build,, im pondering making a higher compression,, like in the 10s, or 11s if i did this , could i still use a turbo after a bit , or would i need to stay around 9 compression to be safe? also,, what would be the hp gain going from stock...
  9. whitmanink

    what did i do?

    so i pulled my motor yesterday , today i went to put it in neutral cuz i never did when pulling the motor (i forgot) .. well the peddle went to the floor like there was no pressure , and i looked at the tranny and i saw fluid comming out the throw-out bearing,,, did i mess somthing up ? i have...
  10. whitmanink

    best way to tackle engine removal ?

    as some of you may or may not know,,, my engine decided to destroy itself, so now i need to get her out,, so this weekend i plan on pulling the block only ( my garage isnt tall enough for both (engine/trans),,the garage roof A/frames get in way after about 8 ft) so is it easier to pull the...
  11. whitmanink

    and the 3v gods betray me,,,,

    coming home from the gym today not even an hr ago,, come off the exit on highway,, come to a stop and my engine is idling at about 400 rpm, sounds like its missing, check engine light is flashing, get over and pull over ,, turn car off and sit in awe of wtf just happend,,,, then try to...
  12. whitmanink

    alternator woes

    hey guys,, soo driving my car the check charge system light came on,, i get 13.4 v when at idle and revved up to 2000 rpm,, and the battery dies from just sitting hooked up to the car over night, so i want to replace my alt,, i have an 2009 gt,, searches in google arent really helping me as...
  13. whitmanink

    cant figure out where this wire connector goes

    i put everything back together ,, and this one connector i cant figure out where it goes? any input on what and where it goes? i did take out my a\c ,, so maybe it went there ,, but an online search yeilded not much other than a wire schematic which i suck at reading
  14. whitmanink

    help installing cams

    hey guys ,, so i go my cams in the mail , but im not sure which goes to which side? the circle at the end of each camshaft seems to have a cutout at a different location than the other ,, so i would think one goes one way and so on? am i correct in thinking this ? and how do i know which...
  15. whitmanink

    took cams off,, not sure what to think

    well guys ,, took my cams off to take out the roller followers so i can start the timing in a few days, and noticed just the cam caps have some ridges in them ,,, like with my nail its bumpy, no chunks missing , just dont know if they are to be smooth or what? also , if this isnt normal , what...
  16. whitmanink

    uh no,, broken oil dip stick ,, now what?

    well , trying to get everything out and out of the way to do the head gaskets and timing , and i sprayed the oul dipstick tube with pb blaster quite a few times at the block , trying to pull it out, wont budge , try twisting and pulling , nothing , than it snapped , , it broke flush in the...
  17. whitmanink

    broken manifold rear bolt

    hey guys , just started to break down and tear apart my 3v ,, days prior , i sprayed the rear manifold bolt nuts with PB blaster,,, lastnight i had a go at it,, and the results were good,, heat and an impact seemed to do well,, well the 3rd nut seized onto the bolt and snaped it off...
  18. whitmanink

    replacement springs

    getting some comp cams stage 3 vsr xfi,, i got the loc outs ,,, the springs are the problem,, at lmr and AM ,, im only seeing these Comp Cams Mustang Beehive Valve Springs; 0.550-Inch Max Lift 26113-24 (05-10 Mustang GT) - Free Shipping (americanmuscle.com) people are saying they are just...
  19. whitmanink

    300,000 miles?

    so im a member on a FB forum group,, and this one guy shows a pic of his odometer and its at 300,000 miles,,, i thank said holy crap!! is that the original head gasket? and u had to have done the timing and roller follwers a few times eh? he said no,, never touched anything!!!!! how is...
  20. whitmanink

    quick check im right plz

    im about to order a high vol pump for my 3v,, i got the M340hv ... in my cart ,, but amazon is saying it wont fit my 09 gt? this is why i would like a check ,, thanx guys
  21. whitmanink

    timing chain ?

    hey guys ,, im trying to find a complete timing kit for my 09 gt,, so far all im seeing is timing kits for the 5.4 4v , or 5.4 3v.. are they all the same>? the 4/.6 and 5.4? if not can someone point me in the direction of a ford complete kit?
  22. whitmanink

    procharger or SC?

    hey guys ,, been looking over at the forced induction options, i seen a procharger kit on AM ,, but it says it makes like 400 sumthing hp.. it dont say weather you have the option to change pullys for diffrent psi for more HP? anyone that has a supercharger or a procharger ,can you shed...
  23. whitmanink

    FORscan

    hey guys,, i got a few new keys i want to program into my stang,, i also need to rewrite my vin on my v8 pcm to match the vin on the v6 body,, can forscan do all of this? i know it can delete PATS, but i wanna make sure it can do everything i need, .. anyone use or have forscan and they...
  24. whitmanink

    06 to 09 door help

    i switched everything over to the gt to make it good , and i used doors out of my 06 v6,, now nothing works on the door, no mirror , no window, no locks, i checked the fuse for the jsb and all is good,, the 09 doors worked before i switched them,??? its a 2009 45th gt .. thanks guys
  25. whitmanink

    05\06 engine wiring harness MT

    i need a 05\06 gt engine wiring harness for a manual trans ,, i cannot find any for the life of me , only thing i can find is some aftermarket one for almost $1000, anyone point me into some leads or the right direction?

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top