Search results for query: *

  1. Deathstang II

    Need some polarity information on SMD Steering Wheel

    The very least I need to know what kind of SMDs these are so I can research them. Never worked with smaller chips like these. I see they have a little dot towards one end which might indicate that side is positive. Thanks!
  2. Deathstang II

    EPAS Conversion question

    Grabbed a 17" EPAS from a 2012 V6. Harness wise Im having a hard time trying to get ahold of part number WC96240 as I would expect since the harness is dated. I can however get WC96223. WC96240 is for Autos while WC96223 is for MT82's. So for what I need it to do shouldn't matter I'd imagine...
  3. Deathstang II

    2012 Mustang Rack & Pinon + Battery Harness

    WTB 11-14 Rack with a 2011-12 Battery harness with 17" Wheels. Doing an EPAS conversion on my '05. Been told the battery harnesses changed with 13-14 models to where the rack fuse isn't built into the positive terminal anymore. I'm looking for the 11-12 ones that do, to make the conversion...
  4. Deathstang II

    Rear passenger Floor pan leaking

    I know, there's countless forum posts on S197 water leaks, only I have not found anything about the passenger rear floor pan leaking. Story goes; I did a typical Mustang owner thing and got a bit impatient at a stop and sent the car into a curb and now have to replace my rear end since it bent...
  5. Deathstang II

    Looking for the right Offset/backspacing for S197 05-09

    I be asking a lot of questions around here, putting a lot of time and money into my ride and the moment and googling around don't help much. So, Looking at a nice set of Laguna S152s for the rear of my car. I'll be running a 17x10, 5x114.3 pattern, but what I'm unsure about is the backspacing...
  6. Deathstang II

    Question about crank position for Cam install

    Got some Hot Rod cams i'm installing tomorrow morning, first time diving into a cam install, but I'm fully aware what to do for the most part. Thought I'd do a little bit of prep for tomorrow and according to the Ford PDF the crank should be positioned in the 12 O clock position and the notch in...
  7. Deathstang II

    Advice for Hot Rod Cams with a good spring set?

    Cars got almost 150k miles on it with the stock valvetrain, any recommendations on replacing the stock springs while im in there to replace the cam? Or would you advise just keeping it stock. Wouldn't mind reving a tad higher with a decent tune afterwards. Hear good things about PAC's but I'm...
  8. Deathstang II

    Converting '05 Cylinder head to an 07-09?

    Given the spark plug design change and thermostat sitting where it should be; Thinkin' about going to the yard to pull some heads off an '07 and have them ported so that way I can slap them on in the foreseeable future. Guess anything is possible, but what hardware is needed to carry...
  9. Deathstang II

    Anyone know what kind of hardware this is called?

    So I have a GT500 Hood replica from Trufiber and the base plate that is responsible for holding my hood pins are pretty much falling off of the hood. The screws responsible for holding down the base have rounded out the fiberglass to the point where it no longer holds the base to the hood...
  10. Deathstang II

    Skelly Pony Trunk Badge

    Made this in Photoshop and had TFB designs print it out for me! Vinyl stickers aren't the best, but still pretty cool!
  11. Deathstang II

    P0330 After using Seacrap

    You know.....I don't know why I torture myself sometimes lol. Remember using this stuff once on a '98 v6 Mustang and it destroyed the MAF. And yes, I am following the instructions one too many times to be sure. Leave it to me wanting to experiment gimmicky products on my car and not learning my...
  12. Deathstang II

    Ford Performance Intake Hardware Question

    About a month back I purchased a used one of these for practically nothing. Problem is, no fuel bypass pipe (already got), and no hardware. The hardware is the issue, from what I gather using the install PDF provided by Ford I need: x2 M6x110 Long bolts (Center Intake Bolts) x2 M6x50 (Front...
  13. Deathstang II

    Changing the factory Interior LEDs in a 2005-2009 S197 Mustang (Guide)

    After discovering how to do this on my own using the original version of this guide, I took the liberty of revamping it which includes higher quality images and a more in depth tear down. I don't take much credit in this guide as the original creator was someone by the name of "Deric D...
  14. Deathstang II

    4.6L Ford Performance Intake Manifold Hardware?

    Funny story....this thing retails for 700 dollars and stole it off some dude in LA for 100 bucks. Comes with 0 hardware however and no fuel bypass hose. Now I could go to my hardware store and figure it out, but maybe some of y'all might know if they sell the hardware separate from the manifold...
  15. Deathstang II

    How to pull out the light switch knob?

    Howdy, Has anyone attempted to remove the light switch knob on an s197? Not many reasons too, though I'm putting LED lighting into this thing and I need to remove the green film firstly. Can't seem to figure out how to remove the dang knob. There has to be a locking pin of some sort, but I've...
  16. Deathstang II

    Skeleton Pony Emblems I hand drew

    These aren't really all that new since a handful of people also create these with their own twists. As a dude that loves the alternative scene I really loved the idea of "Death'ing" out the pony emblems. Use to own a '98 v6 and some dude on eBay hand created some a while back. Bought both the...
  17. Deathstang II

    Converting the Green Interior LEDs to Red?

    Want to first start off by saying hi! New to the forums and look forward to the many future forum threads. Been having this project I've been wanting to do for a while to change out the puke green interior lighting to Red in both the steering wheel controls, door locks, and HVAC. Only problem...
    • Deathstang II
    • Thread
    • ambient lighting interior lighting led lighting mycolor wiring
    • Replies: 19
    • Forum: Pimpin' It!

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top