Search results for query: *

I thought I'd share my video on the swap I did of a 2012 3.7 six speed into an 07 4.0 S197 Mustang

the other day my airbag light and wrench light came on while I was driving. When I got home I hooked my laptop and checked with FORscan. The RCM can't read the DTC, the OCS has lost communication as well as ABS and instrument cluster have U0151 codes. I pulled console and the RCM is plugged in...

I'm taking my 0712 Mustang to Beach Bend this weekend for the NMRA World Finals/Holley Ford Fest. I'll post up some pics

I have had the wet carpet issue, I know fairly common but the usual places were all good. I took the carpet out and spent a while pouring water on the car with no carpet in it. It turns out the plastic that holds the rubber seal for the window has a seal to the body. I removed the screws and...

So I have a 2007, it is lowered about an inch and has 2007 Shelby wheels. Not all that long ago I had a blowout on the interstate. I couldn't get the factory jack under the car. Fortunately for me a guy stopped that had a block of wood that I could pull up onto. This saved the day so now I carry...

I have (for all intents and purposes) a 2012 3.7L V6 6 speed Mustang. Stock. The other day my battery, which is old, needed a jump to get the car started (it cranked really slow). I put it on the trickle charger after I jump started it and drove it a bit. let it sit overnight on charger. Next...

so I decided to replace the cowl hood. I bought a 69 Boss 429 style hood kit from Cervini's. I am test fitting the hood. It came with extensions for the fenders. I also got a 69 Mustang style chin spoiler. I am torn on whether to paint scoop black, body color or leave it off...

Hey all, I am still messing with my project car. It's a 2007 that I swapped everything from a 2012 into. Anyway, the 2012 driver seat was worn pretty bad (big hole in it actually) so I found a full set of 2014 seats. I didn't have the rear from the 2012 so I swapped all of them in and everything...

Now that I have the 200712 Mustang swap complete, I am driving it a lot. I want to address some of the codes. I have an appointment at a tire shop to program the TPMS in the wheels. I do have a brake light on and code P1703 Brake Switch Out of Self-Test Range. Is this the Parking brake switch or...

I'm troubleshooting a "no crank' issue. Below is all I have done so far. Battery measures 13.26V and is on the tender while testing. Full battery power is measured at positive lead “B” (C197A) on solenoid but no signal at trigger lead “S” (C197B) of solenoid when using key. I jumped across those...

I have a 2007 car that I have swapped the entire underhood and body harness to a 2012 (along with the BJB, SJB, seatbelts, dash, engine, trans, etc. etc.). I didn't swap the 2007 door harnesses as they plugged in to the 2012 body harness. My door ajar warnings are on for both doors and the...

Anybody use this setup? I am very curious... https://ncspeedlab.com/products/ford-cyclone-3-7-v6-holley-intake-manifold-adapter

I am swapping a 2012 8.8 LSD axle into my 07 V6 (replacing the 7.5). I have the original 07 LCA's and the 2012 LCA's. They are different stamping designs. Which would be better to use? Or does it matter? It's just a daily driver but I do plan to upgrade antisway bars, springs, etc. for handling...

For those who have done a latter model swap, for example putting an 11 or newer engine in an 05-09, what do you do about the BJB? On the 05-09 it basically unplugs but the newer one does not appear to have any connectors. DO I need to swap entire body harness if I am using a doner car? In my...

Hey all, I am new here but not new to Mustangs. I couldn't find an actual swap thread for the 3.7 Cyclone replacing the 4.0 SOHC so I thought I'd document my project here. Back story, the 07 4.0 auto was originally my wife's car. We bought it used but it was only a year or two old and in great...