Search results for query: *

i have an 08 bullitt.,the car currently has a stock engine, cmdp, 3 inch dynomax cat back exhaust, thp single turbo kit 61 mm billet wheel-10 psi, tr6060, fuel is provided by a gt500 dual pump kit, 93 octane and 60 lbs injectors. 510/530 rwhp. currently i have a spare stock 08.5 + 3v long...

my 08 bullitt has a currently running stock block at 10psi on a stock motor. it's running like a champ but earlier this year i bought an update 08 longblock. as for my long term goal i'm considering cleaning the heads up and a NSR set of cams because i really don't want to put undue stress on...

right now as it sits i have an 08 bullitt with a THP single turbo kit running 10 psi on 93 with a tr6060 and it makes great power all things considered. tonight, im scooping up a low mile 08 3v longblock with the updated heads so i guess ill slowly start collecting parts for an engine build...

this past holiday season i picked up a HD griots buffer,, with a 6" backing plate and some misc pads that came with the kit. im pretty familiar with finishes, technique, etc. despite knowing my way around a buffer, im not a seasoned detailer. im looking for some product recommendation. i...

my search terms are only bringing up vorshlag kits, steeda kits, and the ebay caliper adapter bracket. vorshlags website says there is no visual difference between the calipers, but have seemingly had occasional issues with retrofitting the 13+ rear brakes using the 05-09 caliper. has it...

http://www.jegs.com/i/Holley/510/829081/10002/-1 i thought the only ford motor worth modifying was the coyote :rotflmao:

http://www.dssracing.com/Main_Support_System_1002_p/1002.htm any thoughts in regards to the concept? ive heard good things, and bad things about dss. ive even heard about them regarded in context similar to mmr. i like the concept of the boss block, and saw bruce's success with it. my...

SOLD

f1-d procharger I've started exploring f series procharger more so out of curiosity than anything at this point. I know that a few guys on here converted them to utilize a wastegate. Thus seemingly bringing boost and more so torque earlier on in the rev range while also allowing it to controll...

http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Product_Code=ATP-MUS-001&Category_Code=MUS I ran a quick search but didn't come up with much. I believe these turbos mount in the rear of the engine bay. Has anyone had any experience with the kit, or company? This appears to be more...

i need to kill power to the gas gauge. does anyone know what fuse i can pull to effectively disable my fuel gauge or fuel level sending unit? also, other than not knowing how much gas there is persey are there any adverse effects to this? i only need to drive a short distance like this. once...

Looking to buy now, must be flawless and have pictures. I'm at 60089

i need to replace the battery finally on my 08. i was just going to go with a motorcraft battery as thats all ive ever bought. what do you guys use? i know optima is a pretty popular band. im not running a boost a pump, or a big stereo system. edit, just entered motorcraft into my search...

20x9.5 hyperblack roush wheels with a square nt05 tire setup 275/40/20 + valve stem mounted TPMS and centercaps. only mounted since may of 2014, probably less than 3000 miles on the setup. however lets say 3000-3500 miles just to be conservative. i am willing to ship which will be later...

i read through the thread thats similarly titled to mine, but it spawned a few questions that came to mind. from my impression these "advertised" blocks are crank horsepower related am i right? that being said, what is the conservative rwhp rwtq ceiling on these 1000 horsepower blocks...

im not looking to spend a lot. id prefer theyre from a mod motor v8 but it doesnt really matter beyond that. as long as theyre clean, and cheap.

ive been prolonging this for months, because it hasnt really bothered me but when i bought my roush wheels earlier this year i also purchased the LRS valve stem mount tpms. i had the wheels mounted at discount tire direct with bare wheels since they sold me the tires. i then came home, and...

http://www.maximummotorsports.com/MM-K-member-Mustang-2005-2014-P1476.aspx this k-member looks nice! i currently run a UPR one, and i like it well enough. i may make the switch when i build a motor though. MM stuff is really nice, im surprised more guys from this site dont run their...

ive been running the thp kit since 2009 and ive been happy with it. ive made a few changes over the course of the years, and figured id post some of my results since there isnt a whole lot of thp info out there on this site or in general. im having trouble with photobucket uploading my...

$90 shipped to the lower 48 this came out of a new edge 2v car. i couldnt get it to work on my car. the unit itself looks to be in good shape as well as all of the wiring. its possible i didnt have it hooked up right, but i really dont know. i dont drag my car, so its not worth it to me...

i recently bought some roush hyperblack wheels, tire size is 275/40/20. the tires are a hair below 29 inches tall, and i am running FRPP K springs. ive run into the unfortunate problem that at some point with my wheel clocked at speed the suspesion traveled and just slightly bowed out my...

with the sale pending on my 18 in roush im trying to detemine whats next. im now most leaning towards Mustang Roush Wheel Kit - 20x9.5" Hyper Black (05-14) http://www.latemodelrestoration.com/item/RSH-421278-K/Roush-Mustang-Wheel-Kit-20x95-Hyper-Black-05-14 but im also considering...

im looking for the 19x9.5 split spokes. i prefer bare no tires, but tires are ok. must be willing to ship or meet within driving distance to 60089. wheels must be curb rash free.

i have a strong lead on selling my square setup 18x10 forged roush wheels so im now researching dark stars as a potential new wheel. my car is a street car with nominal if any track time use. with that in mind, i want to run 18x10.5 out back, and im not sure if i should go with 17x7.5 up front...

is this off of a factory car? does anyone know the part number?