Search results for query: *

I am going to order some parts tonight and would like to know if you guys see if I am missing anything. I have a short block sitting on an engine stand that I would like to build over the winter and swap it next summer. I already have heads with upgraded valve springs. I plan on reusing my stock...

Anybody have a clue as to what the nuts and bolt size is for the tr6060 shift plate? My Google skills have turned up nadda.

I'm in need of a shift ball and jam nut for an MGW in the M12x1.75 thread pitch or if someone has a Gen 1 handle for a 07-09 GT500 that would be even better.

I finally have the ability to run a ½ mile event May 20th. My goal for the event is to run 150mph on the stock shortblock. I haven’t had a chance to run at the ¼ mile track yet, I plan on going when it opens next year to get a good idea of where the car sits. It looks like stock 13-14 GT500 run...

Someone on here please buy and swap this with an indepth build thread...

Ended up buying a set.

I'm here to help out anyone that may need this stuff. Yours free, but shipping is totally on you. Stock 05-10 5 speed (3650) driveshaft. Last one I shipped was about $50. Mach 500 clutch that's 26 spline with stock flywheel that was resurfaced. Last clutch I shipped from NC to CA was $100...

Does anyone have any experience with running a variable exhaust like the Dynomax VT with a WOT Box? I know with the no lift shift you do not want to run a chambered muffler. The dynomax VT aren't chambered and when opened they are a somewhat straight through design. I would love the ability...

Any 07-10 guys want to try and piece together a kit here you go. Bracket http://www.ebay.com/itm/2007-2010-Ford-Mustang-GT-4-6L-3v-Paxton-Novi-2200-Supercharger-Bracket-Kit-/201648961333?hash=item2ef336f735:g:qFIAAOSwmc1XPOF5&vxp=mtr Pick up a used head unit (paxton or vortech, make sure it's...

I'm tired of oil all over my passenger valve cover, so I am going to hook up a catch can to these guys. Either lines or if it is just the 90* elbow that attaches to the valve cover that would work too. Needing 2 of the little guys.

For free. I have a box for the DS but it is probably going to cost around $50 to ship. I don't have a box for the clutch and the last one I shipped was nearly $100, so it's only available locally.

I've been wanting to pick one of these up for a while to get my feet wet with detailing and this deal is the cheapest I have seen them. Not sure if it will work with a 20% coupon. http://www.harborfreight.com/6-in-57-amp-heavy-duty-dual-action-variable-speed-polisher-69924.html

TR6060 shifter pins pn: 7R3Z-7314-A TR6060 linkage bolt pn: W712736-S439 Shifter pins and linkage bolt $15 shipped GT Shifter boot has minor wear where it was folded down Sold Stock 3650 driveshaft - Should be about $50 to cover shipping, but I'll have to double check. If you're local you can...

Gen 1 shifter for the 3650. Switched to a 6060 and just had this sent off to MGW to be refurbished. Will sell for $200 shipped. SOLD

Just pulled from my 08. Car had 36k miles, 1 night at the drag strip, and a couple auto X's. Supercharged since 15k and only ever had the stock clutch. Only problem was I cross threaded the shifter bolt on the trans. Located in Fayetteville, NC. $500 No idea if there is any interest in the...

I finally have a long weekend and the free time to try and tackle this install. To those that have done this swap, does it look like I have everything to complete it? I plan on having the stock flywheel resurfaced and I'll need to pick up some brake fluid on the way in. Will be doing it using...

Just moved to North Carolina and need one of these guys to pass inspection. Let me know if you have one.

I'm moving next week and would like to sell this stuff rather than dump it in the trash. All prices include shipping. Saleen louvers, never installed - Sold Stock MAF sensor $15 Vortech/Paxton 3.4 or 3.33 pulley, doesn't say so not sure, the outer rib is slightly bent. $20. Turbo XS bypass...

So pretty. And this is what the tire shop did. After I asked if they could mount 315/35/20 tires. Long story short their remedy was to pay another shop to mount them. I asked for a new wheel but the shop denied it because the damage is not visible once the wheel is mounted. I plan...

I am located in Colorado Springs, CO, but will drive to Denver or Pueblo, CO to meet for anything I am not shipping. I am busy with work/house/kid and will not ship the stuff I have listed as not shipping. Stock vortech/paxton intake assembly with 2 Turbo XS bypass valves and stock MAF...

Draw thru is giving me problems with the tune so I'm going with blow thru. Looking for: HPX Maf and flange 50mm BOV or any Vortech equivalent Anderson Power Pipe for a Novi 2200 Happy Holdidays, Joe

Finished up a project and getting rid of stuff. 2005-09 Dove Gray A pillar cover Most of a GT500 shifter, missing bolt for the arm and the back mount/gasket So yeah, it's all free. I just don't want to see it for sale later like that asshole HOLYWD. And I'm not getting shipping quotes, just...

Putting my stock 2 piece d/s in but need the bolts. I have the 4 front ones, just need the 2 middle with spacers and the 6 rear ones. If anybody has them that would be awesome.

I have a V3 Vortech Si (no tapping oil lines) with 25k miles on it. It has a Steeda heat exchanger, new intercooler pump 2k miles ago, a 3.25" pulley, Kenne Bell Boost a Pump, Diablo MAFia, and 39lbs injectors. There was zero wear in the head unit and zero shaft play. With a Reichard Racing 3.4"...

Looking for a used head unit, little Si isn't going to cut it. Vortech Ti or YSi or Paxton 2200 Thanks