Search results for query: *

Up for grabs are a few items off my buddy's 2010 Roush Stage 3. Everything was removed at under 1500mi to make way for a Kenne Bell. That means this stuff is basically brand new but you are getting really fair pricing. Roush 2.3L TVS - $5500.00 This blower kit is complete (except for...

Sold!! I bought this a short while back to monitor a few extra PIDs. When I bought it, there was not a mount included (which I am now supplying) and there was no cable (which I have also supplied). This is a really nice device, it has served its purpose and I am done with it. Someone pick it...

Ok, so my controller software is showing available ports of say, COM7 to COM22 and my device is located on like port1 hub5 or some shit. We had it connected to my buddy's Dell and it worked flawlessly. It should have recognized all of this PnP shit on my Gateway M-Series as well, both are Vista...

After my automatic conversion, I have a few parts. I don't have an engine harness or PCM, since I have a 4R70w and didn't remove it. Brake/clutch pedal assembly with clutch sensors, slave line and clutch master - $70.00 + the ride Stock driveshaft (replaced under warranty 10K miles ago) - Sold...

Well at long last, we are making good progress. We spent most of this past weekend planning and taking the old stuff out. I replaced the clutch and brake pedals with a single brake pedal for a factory automatic and we clearanced the trans tunnel for the MLPS (manual lever position sensor), since...

I have my 4R70w conversion in full swing this weekend and I was wondering if anyone with a factory automatic 05-10 car can tell me if their brake reservoir has a nipple off of it (plugged) or a cap on the nipple. This nipple is for the hydraulic clutch master cylinder feed on my car, since it...

A few of you know that I am building a new 4R for my car. I said that I would post up a few pics of the internals and here they are. If you would like some additional information I can provide that too, perhaps even in a new thread on the 4R.. who knows. I will be doing a write-up on the install...

In the interest of keeping everyone informed and helping those who encounter issues, I have decided to post notes regarding most of what I have found from my manuals (see references below), personal experience, building of a few 5Rs, and the questions I encounter by PM and email on a weekly...

That's right, I just received the Ford factory shop manual for the 6R80 in the factory binder and on disc in .pdf. I'm still going over everything, but the fact that it has a modified ravigneaux style geartrain is fairly awesome! Also, the number of clutches available in the various drums...

Can we get a sticky or a dedicated post in another reference area for this? A few weeks ago, I posted a .pdf of a "Motorcraft Pigtail ID Chart," and it would be nice to copy that and place it into a sticky somewhere. It has gotten "lost" to other members twice already. I'm afraid I will forget...

I was wondering if I am the only one who is annoyed about this: I cannot stand having to ask someone where they are located when browsing the classifieds and see an item I'm interested in. I would say 3 of 10 times an item is listed as local pickup only, with no location. How am I supposed to...

This is valuable, expecially if you are like me and have ever disconnected something, only to say #!*@! Have at it.

I'm selling a USED 2005 Ford Mustang 4.6L/5R55S (automatic) Engine ECU (Engine Control Unit). This is a BKT3 Code. 5R3A-12A650-ABD FORD Part #: 12A650 PCM Code: BKT3 It can be seen below at Ford's Parts site...

I have my (core) 4R apart, at the house and I remembered reading that the pickup on the S197 reads off of a 12 point reluctor for the OSS (output speed sensor). I cannot remember if the 12 points are for the 6060, the 3650, the 5R55S or if they are all the same. My 4R70W ring gear has 6 holes in...

As it says, I need an automatic brake pedal assembly. You know, all the crap that goes under the dash. Appreciate it!

WTB: '06 V8 automatic ECU/engine harness I need an '06 ECU and Engine harness for the 4.6L/5R55S. It needs to be an '06. Let me know what ya got. If the price is right, the deal is real. Thanks!

I have a new in the box set of 3.73:1 FRPP gears and a 31 spline Detroit True Trac. I also have a Ford set of pinion shims that will go with the gear set. I would like to sell as a package for $530.00 but will seperate for the prices below. Differential - $420.00 Shipped...

These are in fantastic shape, no hardware included or needed. They use stock bolts. Buy them now for $80.00 Shipped!

*BRAND NEW* Axle Exchange "Heavy Duty" 1pc driveshaft. This unit uses no adapters or spacers and it's extremely well manufactured. This is the part you need to put all that power to the ground. • Direct fit, OEM driveshaft replacement for 2005-09 & 1979-04 Mustang V-6, Mustang GT, Mustang...

D/S, UCA, Stock 5R55S Trans *BRAND NEW* Axle Exchange "Heavy Duty" 1pc driveshaft. This unit uses no adapters or spacers, it's the bad mofo. It will come complete in the original box with the companion flange. It is unused and was only removed from the box for inspection. I still have the...

I have made the decision to get a cowl hood. I have been eyeballing the one Steeda uses on their Q cars.I don't know how stout their lightweight race piece is. Really, I just want a quality piece that has good support and fit around the latch area, for obvious reasons. Basically, I think hood...

I am thinking about purchasing a set for the street. Anyone have them? Thoughts on fitment, look? Everyone keeps telling me black, but I disagree. I love chrome and am really not much of a follower. I was wanting to run a staggered set of Asanti or GFGs but the cost is excessive, these are still...

I was going to "simply" swap my '06 5spd to a 5R55 but I found that, really I can do the 4R70W easier and it will be a much better upgrade in the long run. I actually have everything for either swap, minus the 4R control unit. I searched and found a post where Ken stated that he thought there...

I am wanting to convert my 2006 GT 5-speed maunal to a 5-speed auto. Basically, I need the 5R55S transmission, converter, all harness wiring and linkage, the brake pedal assembly for the auto, a factory console shifter and if anyone has an aftermarket driveshaft to fit, I will take that too. I...