Search results for query: *

I felt that the car was running a little slower than normal. I suspected that the boost bypass valve wasn’t working properly so I decided to remove the lid to inspect it. This is what I found. This allows air to bypass the heat exchanger.

I made up a list last fall of all the parts I needed to complete my engine build and started buying. I now notice that some common 3V parts have increased as much as 70%. What has caused such drastic increases in such a short time? M-12029-3V Coils old price $198.00 $269.88 M-6529-3V Rocker...

I have heard of Lightning and Terminators guys swearing by them. I haven't seen any 3V guys running one. It should be able to hear knock and retard timing to each individual cylinder by up to 20 degrees. Any thoughts? http://www.jandssafeguard.com/VampirePage/Vampire.html

As the title states I am preparing my parts list to begin ordering parts for my new longblock. The shortblock is a JDM 302E stroker which will be going into my Saleen equipped 2005 3V. I will be using JDM's Sterling Cams with limiters and the supplied new valve springs. JDM will be tuning the...

I'm on the way back from Kentucky having picked up my new JDM Shortblock. About an hour into the return trip I made a 1hr stop for lunch. Upon starting the car back up I immediately got a P0174 (System Too Lean Bank 2). I have never seen this code before and I just finished driving 1000...

I set of BMR LCA Relocation Brackets. These were on the car for 2 seasons. They were never welded onto the car and made multiple 1.60 60' times without a hitch. Painted Ford blue with a rattle can to cover up the original red color. The supplied mounting bolts and sleeves are brand new with the...

New Grooved Pulleys: PM-2067-G PM-2076-G PM-2087-G http://www.thumpracing.com/grooved_pulleys.htm You can also check our new smooth idler pulleys (60mm, 70mm, 100mm flanged) @ http://www.thumpracing.com/idler_pulleys.htm __________________ Best Run S/C 1.643 60Ft., 7.216 1/8th mile...

New Grooved Pulleys: PM-2067-G PM-2076-G PM-2087-G http://www.thumpracing.com/grooved_pulleys.htm You can also check our new smooth idler pulleys (60mm, 70mm, 100mm flanged) @ http://www.thumpracing.com/idler_pulleys.htm

Who has made it down here so far? Put down your contact info so we can get in touch by talk or text if you like. Thump_rrr (Peter) Comfort Suites Rockingham (910) 410-0077 room 328 Cell (514) 971-3663

I just received new tunes for my car from JDM. I was told that I must do a couple of updates on the X-CAL II first. I was wondering if there was a way to backup my tunes onto my laptop before or during the update process?

Thump Racing's New 2V Single Bolt Tensioner 2000 to 2004 Mustang GT, Mach one, Bullit, and Marauder Heavy Duty CNC Machined Aluminum Prevents Tensioner from bending & breaking under heavy loads Significantly reduces belt slip

I'm looking for the torque specifications for ther GT500 front caliper banjo bolt.

I just installed a set of GT500 front Brembo brakes today. The problem I have is that there is brake fluid leaking from one of the banjo bolts. I'm trying to find the Ford part numbers for both the copper washers and banjo bolts if possible. Thanks

As the title says I need an Innovators West 10% Overdrive Crank Pulley in 8 Rib. If you have one or can get one to me within a week let me know. Regards, Peter

I'm looking for a set of Siemens Deka 60lb. injectors with EV6/USCAR connectors.

When I first installed the blower I was at 10lbs of boost riding on 26x11.5-17" M/T E.T.Streets on factory rims. My 60' times generally ran between 1.58 and 1.63 dpending on the condition of the track. I then switched to a set of Weld XP 15x9 rims and a set of M/T E.T. Street Radials in...

Hi All, As you all know our belt tensioners and pulleys are becoming "must have" parts for high performance and reliability. Our product line is expanding fast and we just added three high quality Saleen Supercharger 8 rib pulleys. These items as all of our products are covered by our now...

I've seen nearly every aftermarket part used on S197's except these. I was wondering if anyone here has tried them? At $115 each retail they're quite steep though.

I'd like to personally thank Dave Lewis A.K.A. GI Joe, BGG Performance for becoming our latest dealer. Dave has a great deal of experience and knowlege in idlers, tensioners and all things 8-rib. Thanks for your support Dave.

I'd like to personally thank Dave Lewis A.K.A. GI Joe, BGG Performance for becoming our latest dealer. Dave has a great deal of experience and knowlege in idlers, tensioners and all things 8-rib. Thanks for your support Dave.

Several weeks ago I found a couple of deals I couldn't pass up. An Afco aluminum radiator for $200.00 and pair of rear Bogart Welded R/T's used only once for $700.00 shipped. I figured that since the weather was crappy last weekend I'd spend a couple of hours and install the new radiator since...

This is the same setup JDM uses on their cars. http://www.bigdaddyperformance.com/index.php?src=photo&srctype=lister&ref=S197%20Roll%20Cage&albumpos=0,1000000,13 http://videos.streetfire.net/video/BIG-DADDY-PERFORMANCE-Bar_185961.htm

I've been wanting a set of 15" x 10" rear Bogarts for a long time. I was mentioning this to my friend who told me there was a set in the GT500 section of SVTP since last August. I sent him the money order on Tuesday and I just received a pm that he got it and they will be shipping on Monday.:clap:

I was trying to find the pic in the NHRA rulebook of the 5 point rollbar when I ran across this article. http://blogs.musclemustangfastfords.com/6258163/editorials/roll-bar-mustang-nhra/index.html Can someone find the article in the NHRA rulebook which will corroborate this? "It reminded me...

Before you all jump in with the RPM Outlet bashing this was I deal I couldn't pass up. I took a chance and if anything goes wrong with this order I'll be the first in line to bash them. Also noted Don_W dislikes for AFCO since they are the same company as Dynatech. I was doing a little search...