Search results for query: *

Ford Racing axle backs in good condition. Very aggressive sound. Prefer not to ship. $300. I'm in the Tulsa area.

I have wheels and tires that I took off my 2011 GT that I'd like to sell. I bought the car in March and it came with Weld 17x10 custom bead locks in the back and Avant Garde M310 20x9 in the front. Micky Thompson ET Street R P305/45R17 and Nitto 555 255/35ZR20 tires. The wheels and tires are in...

Please check out my previous moving thread with lowered prices. All these parts are used: Modern Billet chrome engine dress up parts (as seen at American Muscle) - $135 shipped The following parts are powder coated wrinkle black to match the Whipple 2.3l S/C I had: Moroso Aluminum power...

PRICES LOWERED! I am moving soon and starting to clear out some parts from my long gone (traded in) 2007 Mustang GT. Circle D Triple Disk 3000rpm torque convertor, new - $500 shipped Performance Automatic deep transmission pan (aluminum) - SOLD Derale model 13760 Trans Cooler (new with fan...

I have a set of eight ID1000 injectors for sale. I purchased them used and then sent them to Injector Dynamics for cleaning and flow checking. Two of the injectors had flow rates that were 8 to 10% different so I had ID sell me 2 brand new injectors that matched the flow rates of the remaining...

Also listed on S550 forum here Since I have my Whipple installed on my '19 GT and I can't purchase a warranty from Whipple I may as well get some $ together for a Lund tune so I am selling some take off parts. All with less than 8500 miles and complete: 2019 GT intake manifold complete with fuel...

I have a 2013-2014 GT500 oil pump with TSS billet gears and a 2013-2014 GT500 deep oil pan for sale. These part will work with a 3v GT engine. Prices include shipping. 2013-2014 GT500 oil pump with TSS billet gears (NEW) - SOLD 2013-2014 GT500 deep oil pan (NEW) - $240

I have some new in box 8 rib pullies and a couple of use billet aluminum idlers for sale. I bought them for my 3v based on part numbers used by guys with successful 8rib conversions here in the forum. $115 for all shipped to continental US.

1/28/19 Prices lowered! Working towards selling my Whippled 2007 GT to prepare for a 2019 GT. Here are some of the parts that were slated to be installed on the '07. Will have an unused JDM E302 forged short block and lots of other stuff soon. Shipping and paypal fees extra. Here is the first...

I have collected upgrade parts over the years but with an impending Coyote swap (either drivetrain or possibly a 2014 GT Premium...) these parts need to go help someone go fast! All prices include shipping to lower 48 and PP fees. All parts are new, never installed. REDUCED PRICES...

I have a Cobra Jet hood scoop and it has a surprising amount of flex for being a race car part. The paint is starting to crack at the "corner" of the scoop: I love the look of the scoop but the flex and paint cracking is annoying. Anyone have suggestions to keep it from flexing? I was...

Mustang had been parked for a week and i had left my old phone plugged in to a charger in the center console. Tried to start and of course the battery was dead. Throw charger on it for a bit, enough to start the car to move it out of the garage. This is where I may have f'd up. I unplugged...

I have a built engine to go in and I know I need a stronger transmission so I'm contemplating switching from the 5r55s auto to a manual transmission. At least a TR6060 or maybe a T56 Magnum. If I do go manual I want to get everything working perfectly with the car as it is now (stock long...

I am slowly and hopefully meticulously assembling my long block. A JDM stoker forged shortblock with ported big valve heads and Comp 127550 cams. I have the heads installed and torqued with factory head bolts. I also have placed the cams in the heads with Lubriplate on the journals and...

So, I have a forged stroker build that got put on hold due to a house fire last summer. I am slowly getting around to doing some things to get the ball rolling. I thought I would put my phaser lockouts in my new phasers to have them ready to go. Well, I can't find my Livernois lockouts that I...

I have some parts the need to move because I do not want to store them any longer or can't use. 2007 4.6l block with crank, rods, pistons, heads and cam covers - $450 local pick up. This is the original engine from my Mustang. I had a Comp Cams spring break and drop a valve so on cylinder...

Had a fire in my garage and a lot of stuff is damaged. My JDM 302E short block was on an engine stand in the heavy bag that in was wrapped in inside the shipping crate. As you can see a couple of holes were melted in the bag and the bag caught some overspray. As I feared, the bores are...

I need to know where I can get a shipping crate for an engine block. I had a fire in my garage and it ruined the crate my jdm short block came in. I know it has some value and I'd like to know where to get one so I can get the insurance to pay for a replacement. I'm hope the short block is ok...

If the rumors are true and Ford is developing a single plane crankshaft Coyote engine, will we be able to use one in a 3v build? Would be kinda cool to build a high compression Big Bore with one of those cranks. Will one of those cranks stand up to some boost?

Can you shoot me a price on a Circle D Pro Performance Stage III Billet Multi Disk converter for a 5R55S transmission. 3000rpm stall. Thanks, Wayne

I am in the final stages of parts gathering for a forged engine build. I have the following: JDM 302 stroker short block Ported big valve heads Comp 127550 cams Livernois lockouts TFS adjustable crank gears I intend to lock the phasers and use the TFS gears and retard the cams 6 or 8...

I finally pulled the head off my original engine. A couple of years back I had installed Comp 127450 cams, 26125 springs and Comp phaser limiters while I was still N/A. It ran really good at the time (cams, JLT II cai, LT headers) and I knew that I eventually would go FI. I actually got a REALLY...

SOLD! I have a brand new set of NSR Detroit Rockers for Supercharged Applications that I need to sell since I decided to go big with 127550 cams for my new build. $690 shipped (lower 48), I'll cover paypal fees. Click this link to Brenspeed for some info and a nice video showing how...

I am getting very close to starting my engine build and I need to make a decision. I have a set of ported big valve heads that I purchased used and had Modular Head Shop check out for me. They said that the springs on the heads were Pacaloy set up at 95# on the seat. I currently have a brand...

I am planning a forged stroker build with big valve ported heads, DR for supercharger, to go with my 2.3l Whipple HO and LT headers. I would like to go E85 for this setup and I have a GT500 fuel pump setup with dual 340lph pumps. Would ID725 injectors support my needs?