-
-
Airbag cover rivet size
I swapped out the stock airbag cover with the custom one. There's basically no one on line I could follow for this one....so I kinda went in blind. My fear came once I removed the stock cover, how to deal with the airbag...would it become undone? would it stay put? In my case, once I remove...- MADGT
- Post #8
- Forum: Mustang Chit Chat
-
Back into the Mustang Again in Retirement.
Both are great rides....glad you got what you were looking for...- MADGT
- Post #7
- Forum: New User Introductions
-
Airbag cover rivet size
Have you already removed the old airbag cover and replaceed it with another one?- MADGT
- Post #6
- Forum: Mustang Chit Chat
-
Airbag cover rivet size
Got the cover from: https://zencarbonfiber.com/products/2005-2014-ford-s197-mustang-custom-airbag-cover?variant=54373974409507 Got the steering wheel from: https://www.realcarbontastic.com/- MADGT
- Post #4
- Forum: Mustang Chit Chat
-
Airbag cover rivet size
I believe they are 5/8" large flange...here's the kit I purchased when I did the cover swap (pic)...sweet wheel steering wheel you got there.... https://www.amazon.com/dp/B08TWBFD96?ref_=ppx_hzod_title_dt_b_fed_asin_title_0_0&th=1- MADGT
- Post #2
- Forum: Mustang Chit Chat
-
Bushing removal and installation.
Hey Russell, what did you decide to do? Problem fixed?- MADGT
- Post #11
- Forum: 2005+ Mustang GT 4.6L Tech
-
2013 with 20x10.5" fender clearance
That tool was a winner for me when I went 18x11 in the rear with a 315 set up.- MADGT
- Post #8
- Forum: Tires and Wheels
-
Driveshaft Choices
I went with Ford Performance 3.50-Inch Aluminum One-Piece Driveshaft (05-10 Mustang GT),not sure they have one for your model/year.- MADGT
- Post #3
- Forum: New User Introductions
-
-
Wow it's still leaking (seam sealer?) Edit: body harness grommet
Not sure this is your problem, but here's an interesting one:- MADGT
- Post #6
- Forum: 2005+ Mustang GT 4.6L Tech
-
-
Shifter and parking brake boot
Not sure about them, but interested in seeing pics of your installed wheels.. :)- MADGT
- Post #3
- Forum: Mustang Chit Chat
-
-
-
Hood Repair Question
Dang, what a nasty bite in a terrible location too. I wonder how much a shop would charge to repair vs trying to find an used hood.- MADGT
- Post #7
- Forum: Keeping it Clean
-
-
Ticking from passenger side of engine
A leak in the exhaust may trigger a P0171 code.. as the air/fuel ratio may be impacted. Any codes?- MADGT
- Post #4
- Forum: 2005+ Mustang GT 4.6L Tech
-
Fuel filling issue, the return !!!
Well, not above 1/2 full, but sligtly below 1/2 full...not at 1/4. At this point, I had used 8.5 gals. Went to gas station, and the pump automatically stopped at 8.3 gals which is pretty darn good. No issues using the "hands free" feature of the nozzle. By hands free I mean the feature that...- MADGT
- Post #30
- Forum: 2005+ Ford Mustang v6 4.0L Tech
-
hard clunking in rear
Take a look at post #27...and other posts too...reference: Upper Spring Isolator...see if this would help... https://themustangsource.com/forums/f669/upper-control-arm-squeak-551934/index2/- MADGT
- Post #3
- Forum: 2011+ Ford Mustang V6 3.7L Tech
-
-
-
Fuel filling issue, the return !!!
Many times I fill from almost E to F. Most of the times is 1/4 to F.- MADGT
- Post #27
- Forum: 2005+ Ford Mustang v6 4.0L Tech
-
Fuel filling issue, the return !!!
As a matter of fact, it was then and to this day, that I began tracking how much gas I used so I knew how much I had to pump back in when I stopped for refueling. In other words, everytime I fill the tank, I zero out the fuel consumption gauge before I leave the station so that I know how much...- MADGT
- Post #25
- Forum: 2005+ Ford Mustang v6 4.0L Tech
-
Fuel filling issue, the return !!!
Strangely enough - I used to have this issues early on. Then, it stopped giving me problems. The car is 20 yrs old now, and it used to happen in yrs 1-3....then nothing. Did I do anything different? Nope- MADGT
- Post #22
- Forum: 2005+ Ford Mustang v6 4.0L Tech
Support us!
Support Us - Become A Supporting Member Today!
Click Here For Details