Search results for query: *

Car drove great last weekend. Unplugged it from the trickle charger today to take it out for a spin and 6 varying codes popped up. Tried clearing them and just come back. Wideband shows it running rich. 2006 Saleen SC, cams are locked out. Put a new clutch in last fall. Did have a radiator hose...

Just pulled my car out of winter storage and after taking it easy for a bit decided to do some pulls. It does great from a standstill powershifting all the way to 5th gear. 11.7 on the afr. However if I try a 3rd or 4th gear pull it bogs down for a sec and then goes. Afr goes lean. It is fine...

So I pulled my fuel injectors to have them serviced and found one is missing the seat...wth?? I am going to scope the intake tomorrow... How do i get one of these? What would not having this seat cause? Surge? 2006 Saleen SC #409 MMR 1000S stroked 4.6 3.0 pulley 1 piece driveshaft

Some how i have lost a fuel injector retainer clip. Anyone have an extra one they can sell/donate? Other than holding the injector in place is it that important to have? The rail holds it down .... 2006 Saleen SC #409 MMR 1000S stroked 4.6 3.0 pulley 1 piece driveshaft

So I took my car through inspection and they told me that my right rear brake is not working as well as the left rear brake. This includes the parking brake. Recently I had a frozen parking brake line to the right rear I replaced as well as the parking brake handle/cable that I snapped trying to...

So i ran accross a set of stock mufflers from a 2010 and was wondering if they will fit on a 2006? I am in Germany and they have strict laws on sound. I need to cut about 5 decibles. My car is a Saleen with the magnaflow Saleen mufflers, high flow cats and pypes long tubes. I know i will need...

Man the last time i was stationed here there was a ton of American muscle clubs. Attended several car shows and such Sounds like the German Politzei scared them all away? Anyone? Sent from my SM-N920V using Tapatalk

I have this issue after my new motor. Under heavy acceleration around 6k rpm my bypass valve opens and the car instantly losses power. I have narrowed it to the bypass because if i disconnect it I have power up to 7k. I have replaced the bypass actuator. It's wierd because the vacuum under...

Stock balancer will not work. Looking for aftermarket. Located in Little Rock Arkansas Sent from my SM-N920V using Tapatalk

Just wanted to post that I appreciate Jeremy and Greg taking care of my fuel pump issue. These guys are awesome and a pleasure doing business with. Thanks guys!

Lito is working out a tune for me and the car has developed an issue on WOTs pulls in 3rd. When the car hits 5700 rpms it drops off. It is like I let off the peddle even though I am floored. In 1st and 2nd I have no problem hitting 6500. Lito can't see anything in the datalogs. He says it just...

So i have been dealing with this issue on and off since my new motor. the car runs fine for weeks and then all of the sudden the IC tank is empty and the IAT goes up. I have refilled it several times now, yes with coolant mix.. I have replaced the cap, switched with the radiator cap, checked...

Selling my phasers from my blown motor. They had 39k miles when the 8 cylinder decided it no longer wanted to work as a team with the other 7 cylinders. $100 or best offer. Plus shipping. They are in perfect working order. Just been sitting in my garage. Trying to save up for a dyno tune...

I needed to install cam locks in my car and was a little hesitant going the garden hose route so i bought a sheet of 5/8 plastic and made my own tool. I can make a few more if anyone is interested. Not trying to make money here just cover my costs. I am thinking $30 shipped.

3.8 pulley made by Chicane $20 3.2 pulley made by metco and gates belt 14k miles $50 Stock belt tensioner $15 Plus shipping

So i got my car back yesterday. New stroker 302, BBR stage 2 cams, Saleen SC 3,0 pulley etc etc. Due to the complexity of the build took it into a local speed shop. Shop says that the tune some work but everything mechcanical checks out. It start up and idles and sounds pretty damn good...

Just wondering if there are other Tuscoans out there...

So i ordered a clutch for my 2006 and by mistake i was sent this clutch. It is for an 01 to 04. I can send it back and get credit for it but that is going to take time and already had to buy the correct one. Thought Id ask to see if anyone needs it before i send it back. $320 plus shipping Mike

So 3 weeks ago i was driving into work under normal driving conditions and my engine broke a rod and threw it through the block. The #4 piston desinigrated and broke into hunfreds of pieces destroying not only the block but the head as well. Well we think we found the problem. The intercooler in...

So I need some help. I have been trying to find out the correct clutch and flywheel combo for my new stroker motor. Would a 2004 8 bolt flywheel bolt up to a new clutch from. 2006? Same transmission in a 2004 and S197, right? Difference is the 2004 has a throughout bearing where the S197 is...

Looking for a slightly used or even NIB 8 bolt flywheel either aluminum or billet and clutch for my 302 stroker. Would love a twin disc but ...

Just need an in tank assembly. I have the harness. I managed to break the plastic fitting for the cross tank pick up. It is sucking air.. Edit...I have a 2007 set up. I am under the understanding that there was a change in the pumps sometime after 2007???? Thanks, Jeremy for helping me out.

Anyone in Az? Looking to get to the track or cruise, car shows???

Ever since I installed these gt500 pumps I haven't been able to go lees than half a tank of gas. It gets to a half a tank and then the sender goes crazy and shows 0 miles to empty and starts to buck like it is running out of gas. I've pulled out the sender on the passenger side and turned the...

So, I managed to pinch the plastic tube that runs from the passenger side sump to the fuel pump. The pump will not feed from the passenger side. My question is, can I replace it with a rubber hose or will the rubber deteriorate in the gas? I am not sure how much this plastic line will cost at...