2008 GT Clutch Type

[vnikGT]

Hey folks,
This is my first post.
So I have a 2008 GT convertible s197 and I am shopping for a clutch.
I don't know where my clutch type is listed or spec.ed.
Apparently, there are two types for my year car.
One is a 10 spline and one is a 26 spline.
Depending on which brand I look at.
Is there a stamp of some kind on the transmission identifying it?

it's a 5-speed manual.

Incase that wasn't obvious but some have 6 speeds.

Thank you for your input.

Vinnie

 

[AHaze]

The TR3650 that came in the GTs has a 10 spline input shaft. There are aftermarket 26 spline input shafts available as an upgrade.
The GT500s got a 6 speed (TR6060) with a 26 spline input shaft stock.

 

[Dino Dino Bambino]

Hey folks,
This is my first post.
So I have a 2008 GT convertible s197 and I am shopping for a clutch.
I don't know where my clutch type is listed or spec.ed.
Apparently, there are two types for my year car.
One is a 10 spline and one is a 26 spline.
Depending on which brand I look at.
Is there a stamp of some kind on the transmission identifying it?

it's a 5-speed manual.

Incase that wasn't obvious but some have 6 speeds.

Thank you for your input.

Vinnie

View attachment 98802

Nice car BTW.
The TR3650 fitted to the 05-10 GT is a 5-speed with a 10 spline input shaft, whereas the TR6060 fitted to the 07-14 GT500 is a 6-speed with a 26 spline input shaft.
For your car this clutch kit with the suggested throwout bearing, pilot bearing, and stainless steel braided clutch line is all you need:

Exedy Mustang Mach 350 Stage 1 Organic Clutch Kit; 10 Spline 07809LB (05-10 Mustang GT) - Free Shipping

FREE SHIPPING! Ideal Replacement. If you drive your Mustang like it's meant to be driven, it's easy to burn out your weak stock clutch. If you're starting to fe

www.americanmuscle.com

 

[rocknrod]

There should be a door jamb label on your car that gives you information on many things as well.

https://www.ford.com/support/how-tos/owner-resources/vehicle-specifications/where-can-i-find-vehicle-specifications/

 

[vnikGT]

The TR3650 that came in the GTs has a 10 spline input shaft. There are aftermarket 26 spline input shafts available as an upgrade.
The GT500s got a 6 speed (TR6060) with a 26 spline input shaft stock.

Thank you for the reply

There should be a door jamb label on your car that gives you information on many things as well.

https://www.ford.com/support/how-tos/owner-resources/vehicle-specifications/where-can-i-find-vehicle-specifications/

View attachment 98817

Thank you rocknrod I will look into that

Nice car BTW.
The TR3650 fitted to the 05-10 GT is a 5-speed with a 10 spline input shaft, whereas the TR6060 fitted to the 07-14 GT500 is a 6-speed with a 26 spline input shaft.
For your car this clutch kit with the suggested throwout bearing, pilot bearing, and stainless steel braided clutch line is all you need:

Exedy Mustang Mach 350 Stage 1 Organic Clutch Kit; 10 Spline 07809LB (05-10 Mustang GT) - Free Shipping

FREE SHIPPING! Ideal Replacement. If you drive your Mustang like it's meant to be driven, it's easy to burn out your weak stock clutch. If you're starting to fe

www.americanmuscle.com

Right back at ya
Nice GT as well

 

[brasil]

I ordered a clutch kit from LUK for my 08 Stang. From Rockauto... was around 260 USD. The master cylinder was 100 something.. ( GT500 Master cylinder - the metal type )

 

[vnikGT]

Thanks brasil
Nice Bullitt

 

[MasterofDisaster]

Sweet ragtop!