DMCC Drift Car build

Discussion in 'Drift Racing Tech Discussion' started by tr_racing, Feb 1, 2012.

  1. tr_racing

    tr_racing forum member

    88
    0
    Hi, my name is Kevin & I come from Quebec, Canada. I'm drifting in the DMCC Series, in Canada. I'm also planning to make some XDC & SWD events in us this summer. I'm currently building a 05-09 biw Ford Mustang with a 2011 5.0 motor swap. This is my first Ford, in the past I have drift a 240sx SR20DET, a 240sx LS3 & a 350z LS3 stroke 416ci. Here some pics of my old car in action:

    My 240sx SR20DET:
    [​IMG]

    My 240sx LS3:
    [​IMG]
    [​IMG]

    My 350z LS416:
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Here is my promo video: http://vimeo.com/16795666

    Kevin
     
  2. tr_racing

    tr_racing forum member

    88
    0
    So here is my 2012 project :)

    The biw:
    [​IMG]

    The cage:
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Radiator mount in the trunk:
    [​IMG]
    [​IMG]

    Fiberglass roof that we made:
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]


    Kevin
     
  3. tr_racing

    tr_racing forum member

    88
    0
    Little updates, new headers arrived & we put the motor in
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    We just finish our custom fiberglass rear quarter panel that we made, they fit perfectly:
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    more to come :)

    Kevin

    Kevin..
     
  4. tr_racing

    tr_racing forum member

    88
    0
    I receive my build TR3650 this week-end with my ACT twin plate clutch. We mount everything in place. Just waiting my driveshaft :)

    I only missing a piece for the shifter, the little rod that goes from the shifter to the tranny. He doesn't come with the tranny & doesn't come with the short shifter & Ford only selling the complete shifter assembly, if some have this send me a PM.
    [​IMG]

    Thanks

    Kevin
     
  5. Ampire

    Ampire 3 valve

    1,119
    0
    very cool thanks for sharing
     
  6. Ch4r1ie

    Ch4r1ie The Limey Bastard

    5,211
    30
    Noice! In for this one... :beerdrink:
     
  7. Mike K

    Mike K WANNA BE FAST

    11,404
    7
    WOW! That's a sick build make sure to keep us updated. What are your plans for suspension and power besides just the 5.0?
     
  8. Surfstang2020

    Surfstang2020 forum member

    5,170
    2
    Sweet build man keep us updated


    Sent from your moms phone
     
  9. tr_racing

    tr_racing forum member

    88
    0
    Thanks for all the comments. For suspension I will run a set of coilover from Standard Suspension with Ground Control race camber/caster plate. For the rear I will run BMR suspension stuff.

    For the motor setup, we will run a Vortech supercharged, with Ford Racing PCM + SCT Tuner.

    More updated to come !

    Kevin
     
  10. irishpwr46

    irishpwr46 Official Site Vandal

    Age:
    35
    8,746
    60
    very nice
     
  11. rford426

    rford426 Resident 5.0 H8R

    6,240
    13
    BADASS!!!!!...$ubd
     
  12. braupe

    braupe Resident Diabetic...

    289
    0
    Wow. I can't wait to see the finished product. Congrats!
     
  13. Bullitt3478

    Bullitt3478 forum member

    1,551
    3
    Nice build,I'm in for this one
     
  14. RichardSATX

    RichardSATX Roush On!

    354
    0
    Nice!!! Gonna keep up with this one!
     
  15. dcjones

    dcjones forum member

    100
    0
    What a kick ass build!!! Hope to see you at the SWD Events. I'll be at 3 of them this year.
     
  16. Mike K

    Mike K WANNA BE FAST

    11,404
    7
    I'm just curious why you built new rear quarters?
     
  17. rford426

    rford426 Resident 5.0 H8R

    6,240
    13
    This me and my buddy were goin back and forth...Its can't be for weight...Has be be because its easier to fix on the go and it won't get dinged up as bad...Idk though cause he did the roof as well...
     
  18. tr_racing

    tr_racing forum member

    88
    0
    Roof fiberglass is for weight & to weld the cage on the top.
    Quarter is for weight, easy fix & more flexible. In drifting we have to be close to wall & sometimes kissing it :)
    [​IMG]

    We will have all parts in fiberglass except front & rear bumper & sideskirt. We are working on the door, hood, & front fender. The fender will be modify to fit a 2010+ front end with the 05-09 doors.

    When the other side quarter panel will be ready I will weight the fiberglass one vs steel one to compare :p

    Kevin
     
    Last edited: Feb 2, 2012
  19. Mike K

    Mike K WANNA BE FAST

    11,404
    7
    God damn. Learn something new every day. Thanks man. Keep up the good work.
     
  20. rford426

    rford426 Resident 5.0 H8R

    6,240
    13
    My buddy is a body guy and says the fiberglass prolly weighs more than the factory panels...have you measured the difference in weight?


    EDIT**** Saw what you posted about weighing the 2!!!!!!

    :thumb: