My name is Caleb ( HOLYWD ) and I bought my 2006 Mustang GT Premium Pkg. in September of 08' after owning a whitewater pearl RX-8 for only 3 months . I live in Rockwall , Texas and I was working at the dealer and fell in love with a Satin Silver GT we had as soon as I drove it . Since I have done a few things to it but have gone back to the basics now to do a complete overhaul on the car . I have most of the parts for this project in my garage already but still need to pick up a few things over the next month . I am open to any comments whether good or bad . Also any tips you may have are welcome as well . I am very excited and can't wait to have it finished ( as much as a mustang can ever be "FINISHED " LOL ) and be back to attending local meets again such as cars and coffee here in Texas .
Heres a photo the first week I purchased her
BEFORE
Since I have added a few things.....
-bumper to bumper dual 10" thick stripes w/ added 1" stripe border
-18x9 Stack Racing deep dish black bullitts with Nitto555Rs all the way around
-powder coated black C&L street CAI
-black engine plenum with chrome pony
-full drake scott billet under hood dress up cap set
-radiator fluid canton overflow tank
-chrome fuse box cover
-grenetelli chrome strut bar
-Eleanor center fog grille
-Steeda slide locking hood pins
-rear tailight black-out covers
-turn signal lenses and emergency flashers night shaded
-CDC rear duck tail spoiler
-straight pipe axle-back / muffler delete
-carbon fiber full dash trim upgrade
-SCT X-cal 2
-brenspeed race tune 93 OCTANE
-rear CDC black-out deck lid panel w/ GT logo
AFTER
NOW FOR A CHANGE .......
Now I am going to take most of the parts off and come back with a whole new style and alot more power !
Any items marked with " XXXXXXXXXXXXX " means that they are completed not just sitting in my garage lol .......
-ROH 18x9 DRIFT R wheels (not shipped to US anymore) w/ 275/40ZR18s all aroundXXXXXXXXXXXXX
-H&R 1.5 / 1.7 lowering kit
-steeda caster/camber plates
-rear adj. panhard bar
-un-stripe the stangXXXXXXXXXXXXX
-3.73 or 4.10 FRPP Gears
-Custom painted black and red fire pearl GT plenum engine coverXXXXXXXXXXXXX
-Custom painted red fire pearl valve coversXXXXXXXXXXXXX
-Custom painted red fire pearl rear differential cover
-Pioneer touch screen/DVD/MP3 iphone integratedXXXXXXXXXXXXX
-JBL 1500 watt ampXXXXXXXXXXXXX
-equilength shorty headers
-Bassani X-pipe w/ high flow catsXXXXXXXXXXXXX
-muffler delete/ axlebacksXXXXXXXXXXXXX
-doing something with the tranny (no decision made yet )
-(4) inphinity reverse interior door and rear deck speakersXXXXXXXXXXXXX
-(2) JBL 1000 watt 12" Subwoofers
-custom fit rear dual 12" sub boxs
-re-painted high gloss black air vents
-Metco GT-500 adapterXXXXXXXXXXXXX
-GT500 Throttle BodyXXXXXXXXXXXXX
-grenetelli chrome strut barXXXXXXXXXXXXX
-JLT red fire CAIXXXXXXXXXXXXX
-Stack Racing black billet fuel doorXXXXXXXXXXXXX
-chrome strut bolt coversXXXXXXXXXXXXX
-CDC rear black-out panel
-GT500 rear spoilerXXXXXXXXXXXXX
-GT500 textured rocker panelsXXXXXXXXXXXXX
-GT500 rear bumper fasciaXXXXXXXXXXXXX
-Replacement GT front bumper fasciaXXXXXXXXXXXXX
-3 piece Saleen under drive pulley kit
-Saleen Charge Motion Control PlatesXXXXXXXXXXXXX
-MIKES leather custom interior stripingXXXXXXXXXXXXX
-Stage II COMP cams
-urethane coated 3V upper intakeXXXXXXXXXXXXX
-SCT X-cal SF3XXXXXXXXXXXXX
-ZEX wet kit 100 shot ( or another not sure yet )
-ROUSH hood scoop w/ functional ram air fabrication
-New trunk w/o ducktail holesXXXXXXXXXXXXX
-fix rear quarter panel ducktail holesXXXXXXXXXXXXX
-upper billet grille
-HPP custom nitrous tune by MANNY
+ more I just can't think of at the moment ....... = )
I have not made any hard decisions on the gears , still debating on 4.10s or 3.73s on gears . Any ideas are welcomed !
Everything is ready to rock over the next 2 months .
Heres a photo the first week I purchased her
BEFORE
Since I have added a few things.....
-bumper to bumper dual 10" thick stripes w/ added 1" stripe border
-18x9 Stack Racing deep dish black bullitts with Nitto555Rs all the way around
-powder coated black C&L street CAI
-black engine plenum with chrome pony
-full drake scott billet under hood dress up cap set
-radiator fluid canton overflow tank
-chrome fuse box cover
-grenetelli chrome strut bar
-Eleanor center fog grille
-Steeda slide locking hood pins
-rear tailight black-out covers
-turn signal lenses and emergency flashers night shaded
-CDC rear duck tail spoiler
-straight pipe axle-back / muffler delete
-carbon fiber full dash trim upgrade
-SCT X-cal 2
-brenspeed race tune 93 OCTANE
-rear CDC black-out deck lid panel w/ GT logo
AFTER
NOW FOR A CHANGE .......
Now I am going to take most of the parts off and come back with a whole new style and alot more power !
Any items marked with " XXXXXXXXXXXXX " means that they are completed not just sitting in my garage lol .......
-ROH 18x9 DRIFT R wheels (not shipped to US anymore) w/ 275/40ZR18s all aroundXXXXXXXXXXXXX
-H&R 1.5 / 1.7 lowering kit
-steeda caster/camber plates
-rear adj. panhard bar
-un-stripe the stangXXXXXXXXXXXXX
-3.73 or 4.10 FRPP Gears
-Custom painted black and red fire pearl GT plenum engine coverXXXXXXXXXXXXX
-Custom painted red fire pearl valve coversXXXXXXXXXXXXX
-Custom painted red fire pearl rear differential cover
-Pioneer touch screen/DVD/MP3 iphone integratedXXXXXXXXXXXXX
-JBL 1500 watt ampXXXXXXXXXXXXX
-equilength shorty headers
-Bassani X-pipe w/ high flow catsXXXXXXXXXXXXX
-muffler delete/ axlebacksXXXXXXXXXXXXX
-doing something with the tranny (no decision made yet )
-(4) inphinity reverse interior door and rear deck speakersXXXXXXXXXXXXX
-(2) JBL 1000 watt 12" Subwoofers
-custom fit rear dual 12" sub boxs
-re-painted high gloss black air vents
-Metco GT-500 adapterXXXXXXXXXXXXX
-GT500 Throttle BodyXXXXXXXXXXXXX
-grenetelli chrome strut barXXXXXXXXXXXXX
-JLT red fire CAIXXXXXXXXXXXXX
-Stack Racing black billet fuel doorXXXXXXXXXXXXX
-chrome strut bolt coversXXXXXXXXXXXXX
-CDC rear black-out panel
-GT500 rear spoilerXXXXXXXXXXXXX
-GT500 textured rocker panelsXXXXXXXXXXXXX
-GT500 rear bumper fasciaXXXXXXXXXXXXX
-Replacement GT front bumper fasciaXXXXXXXXXXXXX
-3 piece Saleen under drive pulley kit
-Saleen Charge Motion Control PlatesXXXXXXXXXXXXX
-MIKES leather custom interior stripingXXXXXXXXXXXXX
-Stage II COMP cams
-urethane coated 3V upper intakeXXXXXXXXXXXXX
-SCT X-cal SF3XXXXXXXXXXXXX
-ZEX wet kit 100 shot ( or another not sure yet )
-ROUSH hood scoop w/ functional ram air fabrication
-New trunk w/o ducktail holesXXXXXXXXXXXXX
-fix rear quarter panel ducktail holesXXXXXXXXXXXXX
-upper billet grille
-HPP custom nitrous tune by MANNY
+ more I just can't think of at the moment ....... = )
I have not made any hard decisions on the gears , still debating on 4.10s or 3.73s on gears . Any ideas are welcomed !
Everything is ready to rock over the next 2 months .
Last edited: