What have you done to your mustang today?

[bujeezus]

Ok. My car is basically stock with only exhaust springs and wheels. What would be the best 500 dollars spent
1. Tune
2. Navigation system (tomtop/sintegrate/Moddiction)
3. MGW
4. Driving school/HPDE

Sent from my SAMSUNG-SM-G890A using Tapatalk

What the hell are exhaust springs?

 

[Strengthrehab]

What the hell are exhaust springs?

You don't know?

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[bujeezus]

Is it like blinker fluid?

 

[cbass]

What the hell are exhaust springs?

Alternative to clamps.

 

[Gabe]

For his sake I hope Ken is using the red exhaust springs and not those above.
The red ones work best on '15+ cars

 

[Strengthrehab]

Red it is

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[Gabe]

Installed the Kenne Bell BAP I've had sitting here for a few months.

Do I need to upgrade a fuse under the hood now?

 

[GallopingFord]

On your GT?

 

[Gabe]

On your GT?

Yes.
Reinstalled the L&M twin 66mm TB, installed the BAP , getting tuned tomorrow.
Wondering if I need to go to a higher-amp fuse for the fuel pump.
I thought I read that somewhere ... switch to a 30A fuse?

 

[Scott_0]

installed the rear Koni's and BMR performance springs, took me about an hour and 45 minutes in my driveway on jack stands, had to have my wife pull the spring out while pushed I pushed down on the rotor. love the rear ride height! adjusted them a 1/2 turn from full soft. I'll do the front tomorrow morning.





Sent from my Galaxy S7 using Tapatalk

 

[travelers]

For his sake I hope Ken is using the red exhaust springs and not those above.
The red ones work best on '15+ cars

We're not going to go there again are we??????

I agree the red ones are the High Powered ones.....

Yes.
Reinstalled the L&M twin 66mm TB, installed the BAP , getting tuned tomorrow.
Wondering if I need to go to a higher-amp fuse for the fuel pump.
I thought I read that somewhere ... switch to a 30A fuse?

When I installed the Roush setup on mine I had to change to the 30A fuse.

 

[Gabe]

When I installed the Roush setup on mine I had to change to the 30A fuse.

You're the 3rd person telling me to do a 30A so I feel good now that I already did that

Looking forward to the re-tune tomorrow.
I know that even without a re-tune the car feels better with the bigger TB installed.

 

[KatoS197]

Ok. My car is basically stock with only exhaust springs and wheels. What would be the best 500 dollars spent
1. Tune
2. Navigation system (tomtop/sintegrate/Moddiction)
3. MGW
4. Driving school/HPDE

Sent from my SAMSUNG-SM-G890A using Tapatalk

Stock shifter in the '15+ cars is actually pretty decent for OEM. I say TOON. Lund/nGauge.

I keep circling the idea of the Raxiom NAV/Touchscreen dealio. But I've been getting by just fine watching for moss on trees.

 

[KatoS197]

Just ordered my Lund Tune+nGauge combo this morning!!!!

 

[ford20]

Installed the Kenne Bell BAP I've had sitting here for a few months.

Do I need to upgrade a fuse under the hood now?

VMP gave me a fuse to swap out to the F13 location in the box with their plug and play kit. I am pretty sure it is the clear red one.

 

[Gabe]

Yeah that's the location that the owner manual calls a fuel pump relay ... stock was a 20A mini fuse, I put in a 30A

 

[konablue11gt]

Yeah Gabe, you need a 30 A in that spot if you go to a boost a pump . Lol I found out the hard way long ago It blew on me 400 miles from home and didn't have a clue what was wrong. After I put the 30a in I had no more troubles.

 

[TGR96]

Just took it to the shop to get an alignment. I guess it was due, since I lowered it a couple of months after I got it and never got the front end corrected.


The guy at the shop tried to sell me a set of cam bolts for $54.95 installed. I turned him down, since I know that I could get a set from AM for like $25 and install them myself, but now I am kinda wishing I had taken him up on his offer. I just hate having other people wrench on my car unless I absolutely, positively can't do it.

 

[ford20]

cam bolts?

 

[Gabe]

But if you do them yourself you have to go back and pay for another alignment ...