I did get another tune from Brenspeed that helped with the surging but not the hot start. It had the hot start problem when it was stock without the cams or supercharger. I'll increase the gap at the next plug change.
I probably need to clarify the problem. It cranks fast and has a new...
Any other ideas on this? The spark plugs are new with .025" gap. I have 9psi of boost. The fuel pressure sensor went out last week. The sensor smelled like gas and set an engine code. I replaced it and the code went away. However, I'm still having a problem starting when hot. It sounds...
Not trying to advertise but I designed the seat in the links below. You will never sweat with latch again.
https://www.youtube.com/watch?v=P2jP9uIZ7NI
https://www.youtube.com/watch?v=DvchkDWPPcM
I used to design and test heavy truck and automotive a/c systems including a few Ford's. The Ford style joints leak slowly even when new. With a 9 year old car its possible you could put some refrigerant in and last a couple more years. Alternately, you could put a can in and still have...
My car starts great when cold. However, about 80% of the time when hot I have to crank it quite a bit before it starts. When it finally starts it sounds like it is flooded. Any ideas?
I currently have a Saleen supercharger, Brenspeed tune with GT500 fuel pumps. It has new spark plugs. I...
Just installed a Saleen series VI a couple months ago. The crossover and alternator mount are unique. There is also the water tube that lays in the engine valley. Not sure if that is unique to Saleen but it was different from my stock 07 piece. The rest of the parts are easy to acquire.
Very easy to install. I did it at the same time as the upper control arm since it was already on jack stands. I installed in the 5th position and love the feel. Had a couple 1st to 4th shifts when being lazy but I'm sure that will go away as I get used to it. 2nd to 3rd is very positive and...
Used to design automotive a/c systems for a living. By far the most troublesome part is the expansion valve if it has one. Is the line cold after the expansion valve or orifice tube?
I know there are better heat exchangers available but I already have the 08 GT500 heat exchanger and don't have $700 to spend right now but could do $100 for fans. Has anyone put fans on a GT500 heat exchanger? If so, what are your IATs with the fans?