Recent content by Morris

Rears were fine but you got to center the axle with a pan hard bar. The fronts rubbed on the strut mount on the drivers side (I ran koni struts not sure how it would be on a stock strut) until I added a good amount of camber. I would recommend to swap out to a 285/30 series in the front to...

Few more shots

updated original post, Nor CAL.

Here how they looked on the car

All 4 rims 20x10 48mm no blemishes all 4 wheels 305/35-20, only a few thousand miles on them call is sold, now these need to go. I would prefer a local sale. First one to offer 800 for local sale. Wheels are located in Brentwood CA. 94513 buyer would pay shipping if needed. I also have some...

If anyone is interested in that square set up let me know. I sold the Mustang with the stock wheels. The AMR Micky Thompson set up needs to go. The car hooked like it was on rails once the greasyness of the new tires wore off. The wheels are like new no blemishes and I only put a couple...

sorry guys I should have added more info. I was a little pissed off with failed attempts on the previous thread for my rims/tires. Anyway I ordered these for my 2012 and I don't know what other years they would work with.

thanks, i enjoyed them while was rocking them. Car is sold now so they have to go. Here is a pic of when I was playing around with plasti dip.

both sides, new, never installed 80 plus shipping or 150 for both. 60 bucks for the plugs or 200 for everything.

mods, please move this to the mustang parts for sale. Sorry about the misplacement.

Here is a pic of the linea corse but it was before I had the spacers and center caps. I think I forgot to mention my location. zip code is 94513, it's the Brentwood in N CA.

Here is a few pic with them on the car.

20x10 amr 48 offset with 305/35-20 micky thompson square set up, includes a set of locking lugs. rim on the left, linea corse lc818 19x10 38 offset, perfect for a 285/35-19 set up (thats what I ran at the track) includes spline drive locking lugs, small spacer for the front and center caps. I...

Just some FYI for guys who may try that tire size. I did that with Mickys and had roll the front fender a bit more than factory. Also with the koni shocks the top of the tire will rub a little on the top of the strut mount without adding in a good amount of camber. Drivers side only as the...

Bummer no hits guess I'll call the wrecking yards.