In my quest to find the best price on new OE coils for my 06, I came across these on Freedom Racings web site. Anybody here running them or have some input? If not, then I will just order a set of motorcraft ones from rockauto. The Granatelli Hot Streets are taking a hot shit. More than half...
I ordered the kit with the viton seal for $205 from http://www.superchargerrebuild.com/?page_id=6. This writeup helped me with about all the info I needed: http://mustangforums.com/forum/4-6l-...-write-up.html . I used a local machine shop to press the impeller off and back on instead of hitting...
My builder builds more old pushrod and lsx motors than anything else, my motor was his 3rd 3v shortblock to build. He set mine right at .002, I told him I wanted to run ~18psi at some point during the motors life, and he recomended 10w30 and no thicker than 10w40 pending on operating temps. The...
This is why I use a vise and put a soft metal between the jaws and the ground strap. The vise give you more control and the soft metal will scuff and distort before the ground strap.
Missfire will show lean, too large gap will have blowout, dropping a plug or pushing on the electrode can cause...
Squeeze the ground strap in a vice, I have ungapped from .02 before and always have had the gap widen when I use a vice. Just use a soft metal on the vice jaws to prevent boogering up the grounding strap and creating possible preignition hot spots, I use brass tags that are easy to shape around...