Search results for query: *

Pittsburgh, PA For Sale: GTB Mufflers (Stock Bullitt muffler) - very good condition. Were on the car for 11,000 miles. Tips are perfect. $200 plus shipping. Set of 4 Bridgestone Blizzak 235/55R17 snow tires with rims. No TPMS. 9/32 tread. $350. Will not ship. TPS...

Will have a bunch of parts up for sale this week.

Now I gotta figure out how to program it. My kid installed it while I was at work. Want to display boost (I have their boost sensor kit installed), IAT and want the two lights to come on at 6,000 and 6,300rpm respectively.

After hours upon hours of work and aggravation, the Paxton is in and running. I've driven it maybe 5-6 times and while I should like the extra power, I find myself not enjoying it. I find myself banging off the rev limiter in 1st gear despite my best efforts, when the power hits in 2nd and 3rd...

I need a local performance shop I can trust. Not for now but future. Anyone have any recommendations? Prefer a 3V Mustang specialist. Thanks! Bill

With the extra power the blower makes, the rear end always pulls/slides to the right when I accelerate hard. Is this normal? Why not to to the left, or straight, for that matter. Stock rear end, 3.73 gears, Stallion racing LCA's & PHB and BMR relocation brackets, 2nd hole. Car has never...

Want to get a set. If Cam could respond, that would be great. I know he used them on his Bullitt. I just want to do the rears. Will that negatively affect handling? Just a street car. Where and what to buy?

Working on installing an Aeroforce gauge with boost sensor. I got the sensor unit and 5v power kit. I need to run a wire from the fuse compartment to the drivers side A pilllar. Is there access anywhere on the drivers side firewall into the passenger compartment? Photos would be great...

It's the connector for the TPS. 2009 Bullitt, which is different than a stock GT. 2010 uses the same intake. Tasca is telling me I need to buy an entire engine harness. Not happening. Any ideas where to get this thing? Thanks! Bill

Installing a non intercooled non oil fed unit. What the fuck is this steel braided line for? I'm ready to send this fucker back. Nothing but problems.

I'm going to start installing a Paxton blower this weekend. In looking over the needed tools, I'm missing a few. I need the below tools and have never even heard of them. Where is a good place to buy them? 3/8" NPT Tap and Handle Springlock 3/8" and 5/8”Fuel Fitting Disconnect Tool...

I'm going to be putting in a new pump for a blower install. How do I release the pressure to get fuel from spraying everywhere? I'll be be pulling the injectors, fuel rail and manifold at the same time. Thanks! Bill

I just ordered a FRPP rear diff cover and want to know if it'll clear the adjustable panhard bar. I really don't want to order more shit that I really don't need if I don't have to. This was an impulse purchase. I really don't need it. If I have to buy a bracket, I'm canceling the order...

Apparently I don't know how to use the search tool properly and didn't find the answer I was looking for so here goes: I will be installing a new fuel pump in my '09 as a part of a blower install (this kit - http://www.brenspeed.com/fbpaxton.html) and it includes a new fuel pump. I...

While swapping out my summer tires for winter ones, I noticed that one of my struts is leaking (Koni STR.T). I currently have GT500 strut mounts. Do I need to replace the strut mount when I replace the strut or can I reuse it? Is it going to fall apart like the stock GT ones did when I...

Have any of you used plastidip as a winter paint protector? I just bought a few cans of the clear to apply to my front bumper, front part of the hood/fenders and the rocker panels to try and protect the paint from rock chips this winter. My car has very, very few stone chips and I’d like...

Looking for four 17" rims to mount snow tires on. Obviously, for winter they don't have to be perfect. I can get new ones from tire rack for $110 each so I'm looking for a better deal than that. Don't care about the TPMS sensors unless they're already on the wheels. Thanks in advance.

I'm going to try and track down a new noise in the rear suspension that I've been hearing for the past month or so. It happens only on certain bumps and appears to be coming from the right side of the car. I've read that the parking brake cable sometimes will make noise from rubbing on the...

I'm looking specifically for Steeda springs, no other brands. As for the PH bar, it doesn't matter.

If anyone that has installed a 1st Gen MGW shifter, can you please tell me if it goes into the trans tunnel from the top in one piece or two? I've tried going from the top with both the rod and shifter bolted together but the back part that screws into the tunnel gets jammed up. And if I try to...

Last August I purchased a used MGW shifter from a member here and when it arrived, I was less than happy with it. It was pretty beat up, to say the least. It was also missing at least one fastener and the shift ball was cracked. I didn't want to attempt to install it due to the condition so...

I'm going to look at a couple of 2013 GT Premium's with the MT82 tomorrow, no other options. My 09 Bullitt only has 20,000 miles on it, just bought new tires too. I put 3,000 miles on the car last year and don't really need it, let alone a new one. WTF am I thinking? Yeah, It's been...

I still have the original BFG's on my '09 Bullitt but it's time for them to go. I had planned on buying 18X9 & 18X10 rims along with Nitto 555's from AM, but I'm getting bored with the car and might get rid of it so it doesn't make sense to go that route at this time. I found a set of Nitto...

http://www.pvgp.org/complete-2013-event-calendar/ This looks like it's going to be a lot of fun. This year the Mustang is the featured marquee and there's sure to be a lot of cars.

I recently purchased a PC7424XP, a variety of 5.5” LC pads and the proper backing plate for the pads, plus a bunch of other stuff, which I won't bore you with. Can I use the 5.5” pads on areas like the bumpers, the areas around the quarter glass, rocker panels, etc. or do I have to...