Search results for query: *

Location is Conway NH. White Mountains

Got it. Need to put my screen name on a piece of paper next to the wheel so it is obvious it is actually my wheels. Took the picture down until I can complete. Thanks

Added that it is a set of four wheels and tires. Not sure what is meant by update your photo?? Can you pm me with the concern?

SOLD Awesome deal. Going to try to sell here with the, well chosen, extras first. Then will sell locally after removing most of the extras. Car was purchased 11/12/13. $27,950. (nada used retail is 32,750) Always garaged and winter is stored in a heated facility alongside a collection of...

SOLD Set of four wheels and tires have six hundred miles on them. Selling my car. Off of my 14 GT Track Pack so work well with the brembo brakes. Wheel nuts included. Original cost over 2400 dollars. Asking 1700. Local sale. Can meet within two hour drive of Conway NH. Tod

I use Ground Control "conversion kit" with my Koni Yellow. I only wanted to lower a half inch in front and three quarters of an inch in the rear so did not use the GC shorter body Koni's. Works well for track and street. My GC springs are set more toward track ability at 430 front and 225...

Agree......

Two more great flow formed wheels known to fit with Brembo. Forgestar F14 18x10 43 offset. And Apex EC7 18x10 43 offset. I bought the F14 on sale for under 1200 shipped but usually nearer 1400.

Yes please. I want the 295/35/18. Here is the reply I received from BFG customer service a few weeks back. "We apologize the 295/35ZR18 tires are not available for retailers to order. Tod, at this time we do not have a date as to when production will start. If tires are needed soon we suggest...

I wrote to BFG and they said they have no idea when the 295/35/18 will be made this year. Here is what they said. We apologize the 295/35ZR18 tires are not available for retailers to order. Tod, at this time we do not have a date as to when production will start. If tires are needed soon we...

On most street cars heel and toe is actually rolling your foot from brake to gas. So the left side of your foot on the brake and roll the right side of your foot onto the gas. This can change a bit depending on the cars pedal layout. Professional track schools that use Camaro and Mustang type...

A set of SRP medium are here and waiting for install. Great looking piece. I asked for a set without the footrest and saved $20 as the footrest did not matter to me.

Ground Control can upgrade the dampers to higher end double adj monotube Koni's at added cost. They advertise a kit with double adj front and single adj rear on there site for other makes of car. I would think they can do the same for our Mustangs?

Tirerack tech said the 295/35/18 Rival on a 18x10 wheel will work; but will give the tread area of a 285 due to being slightly pinched. He said go for it as the Rival is going to be better than any of the 285 tires of similar treadwear.

Sorry, Not Vorschlag on the Enkei. Sam Strano is selling the 10.5 Enkei. Sam Strano says he is running these wheels with Hoosier 315/30/18 with no issues? The front requires a 5mm spacer per Sams site. The rear does stick out a bit. Cortex sells this wheel square at +47 and requires a...

The tested and good offset is 38 for 10.5. Enkei PF01 is available. Decent price and excellent wheel. Front will need a 5mm spacer with wider tires and rear is good. This is according to Sam Strano and Vorschlag on the forums. They both sell this wheel. Vorschlag has done a ton of work with...

Tire Rack recommended I use the Rival 295/35/18 on my ten inch rims. They said I would lose the effectiveness of the 295 and that it would behave like a 285 but the Rival is so superior to other tires in its category I should go with the 295. Still not sure if I will go with the Rival for 2015...

Vorschlag has covered this in their awesome SCCA forum updates. Do a search; but here is some input. Modifications that can cause EPAS Feedback Failure Aftermarket Front Control Arms Aftermarket Front Control Arm Bushings Radical changes to front suspension geometry Significant...

And Nitto says yes. Always best to check the tire company website or tirerack etc. 10 inch is the minimum wheel width for the 555R. And 11 is the measured and preferred width. A 285/40/18 is right on the Nitto preferred width at 10 inch.

Thanks Jason! I appreciate you weighing in on the 295 with 10 inch rim. And good to hear BFG Rival will be available at more dealers this year.

Thanks Norm. You say 285 instead of 295 on my F14 18x10 is the best combo for this size wheel for track days. Guess that means no Rivals. I suppose RS3 is the best for 18x10 wheels, in a 285/35/18.

I don't understand the Fays2 stories of noise and "clocking"?? Mine has been in the car for about five thousand miles and six track days on NT01s and is noise free and superb. Installed it myself in my garage and you just need to be sure to do the work correctly. And Jim Fay got on the...

Thanks for your thoughts. I was hoping to go with a 299/35 BFG Rival but may look for a 285/35 tire. Maybe Rival will introduce that size this year? My car is a track day car. I was previously running on 18x9.5 with Nitto NT01 but want to go with a street and track car this time.

These 10.5 work but the front require a 5mm spacer. Stranoparts sells them. Enkei Racing PF01 Lightweight 18x10.5 inch wheel kit. I believe they are 38 offset. Personally I went with the 18x10 Forgestar F14. Light weight, good quality, strong and reasonable price. A 10.5 would have allowed...

Yep 18x11 is ideal but......Note that on 18x11 you can no longer swap wheels front to rear as the offset for the wheels has to be different. The right offset 10.5 can be same and swapped front to rear. Vorschlag has the 18x11 offset figured out. Regarding noise. With my NT01's I began using...