Search results for query: *

Anyone know If the 20amp will work fine on a coyote?

Looking at swapping to e85 on my 2012 I found a great deal on a 20amp kennebell bap would this work fine? Or does it have to be 40amp? Stock fuel setup nitrous car right now, getting lu47s and bap ASAP!

Can it still be ran on one fpdm?

I'm wondering what going up a hole on the uca mount would do?

Yes they lowered it approx 1.5"

Ill try softening the rear shocks a few clicks, it's very border line on hooking perfect and spinning... Next thing ill order is some front struts. What's the best ones to go with? I had the strange single adjustables on my 06, however I've heard they aren't the best for drag racing, and...

Alright, anything else I can adjust in the mean time to help out?

Hi everybody I have a 2012 gt auto, bolt ons, and nitrous Stock gears Stock front struts No front sway bar Strange single adjustables in the back (set full stiff) Bmr poly tubular rear lowers Steeda adjustable upper with they're mount set in stock hole Bmr lower relocation brackets set in...

Going to be wiring this up along with a msd two step on my nitrous car. Any tips on where everyone is putting the relays/ wiring?

Pm a price! I'm PayPal ready!

Looking for a pair of new or used 05-10 GT front brake caliper brackets. 05-10 GT only! Price shipped to Palmdale, ca 93552 Thanks!

There is barely enough room to get a finger in there. So maybe .5" max The car has bmr relocation brackets, control arms, steeda adjustable upper and steeda upper bracket. Motor wise it's boss intake, airaid cai, and a 4300 stall. Have a nitrous system on the car too, however I'm trying to...

I'm afraid if I adjust the a/s or shocks the car will blow the tires off... The back spacing is 7.12" I believe (according to late model resto)

The cobra jets lowered it 1" in the back (1-1/8" in the front) They are making contact with the fender lip. Track was working good, the rear shocks were set to 5 clicks (strange single adjustables) and the car does have some rear squat, however it's what making the car hook for me now And 17 psi

Took the car out to the strip today, and after making a few passes and swapping the rear tires I noticed a line on the outer side of both tires from them rubbing. Anybody else have this issue? Car is a 2012, 275/60/15 m/t et pros with sve 15x10s and 2013 cobra jet springs I don't think...

So I feel like my car should be 60' a bit better, and need to figure out what direction to start adjusting in. Car is a 2012 auto nitrous Best 60' is 1.65, avg 1.7 with a little bit of slip Suspension is, bmr lowers w/ bmr relocation brackets in top hole of brackets, 15x10 rears with 275/60/15...

Thanks for the input guys! my dad backed out of getting that particular blower because he doesnt want to tap into the oil pan... So were looking for a roush or vmp or base vortech/ paxton 2200 for now!

Well my dads stepping up from nitrous to a blower setup on his 2012 boss Car has cat deletes, intake, bama tune and a 100 shot now, found a killer deal on a New vortech JT trim tuner kit with vortech BAP and 8 rib upgrade! Going to pick it up tomorrow. Now i know we need the adapter kit for the...

im looking for a t56 for a 2011+ mustang... wonder what it takes if you do decide to swap it out...

alright so im thinking it is the multi disks im hearing... Thanks for the help guys!

Key on (cars off) I hear a high pitch sound (kind of a solid buzz) comig from the bell housing, it's barely noticable, but using a stephiscope It's obvious where it comes from. What's electronic in there?

I bought a used circle d converter off of a well know guy here on s197, Had it installed at the local tranny shop, and noticed it has a rattle (almost sounds like a heat shield rattling) at idle in park/neutral. When creeping (car in gear foot off brake) it makes it at a certain rpm too...

93552 Palmdale, ca

How much for 14 quarts (or 3 gallons and 2 quarts) of ATF for the 6r80 signature series or whatever it is?

Alright. How many quarts should it use?