Search results for query: *

  1. S

    Toyo Proxes r888 for sale

    I have a set of 275-40-18 Toyo Proxes that have approximately 5 heat cycles on them. I have attached pics of the tires as well as the durometer and depth gauge. They are anywhere from 4-5/32" (New they are 6.3/32"). The durometer shows anywhere from 60-64 across the tire in 65* tire temps...
  2. S

    Need 3.08 gears

    Looking for a set of 3.08 gears for an 05-10 Mustang. Let me know what you have. Thanks
  3. S

    Corbeaux Harness Bar 05-14 S197s $195

    SOLD I am finally putting in a cage so I no longer need this bar. It is very good condition. Does not include belts. Features and Benefits: - Easy Bolt-In Installation - Gray Powder Coated Finish - Connects to Key Locations for Maximum Strength - Retains Most Space In Your Back Seat...
  4. S

    Whiteline Adjustable Rear Sway Bar for 05-14 $170.00

    SOLD.....$170 plus shipping. The bar is brand new, the links I have about 1000 miles on them. The part of the link that mounts it to the chassis I have it, I just hadn't removed it before the pic was taken. Improves Handling Performance Perfect for Street Applications 27mm (1-3/32") Diameter...
  5. S

    R888 Toyo Proxes in Great Shape

    I have a set of 275-40-18 Toyo Proxes that have approximately 5 heat cycles on them. I have attached pics of the tires as well as the durometer and depth gauge. They are anywhere from 4-5/32" (New they are 6.3/32"). The durometer shows anywhere from 60-64 across the tire in 65* tire temps...
  6. S

    Roush mustang signature complete seats**SOLD**

    SOLD! I PULLED THESE FROM MY 2006 ROUSH MUSTANG. I HAVE TURNED THE CAR INTO A TRACK CAR AND REMOVED THE ENTIRE INTERIOR. THESE SEATS ARE IN GREAT SHAPE AS YOU CAN SEE IN THE PICS. I ALSO HAVE THE REAR SEATS THAT ARE INCLUDED THAT HAVE THE SAME TYPE OF COLOR PATTERN. I HAVE THE OTHER INTERIOR...
  7. S

    05-09 Pypes Pipe Bomb Axle Backs

    Looking for a used set of Pipe Bombs that will fit my 2006 GT. Not sweating the condition as long as the fit correctly.
  8. S

    Corner Balancing for all you Road Course people

    I am looking for somewhere to take my car near Greensboro, NC to have it corner balanced. I know that you want to cross balance so that LF+RR = RF+LR. My question is do you try to move the weight to the rear as much as possible while obtaining 50% cross weight, or is where the weight ends up...
  9. S

    42lb blue giant injectors $200

    I was running these with my blower setup, but just upgraded to switch to E85. I lost 1 o-ring but I wouldn't install injectors without new ones any way. Injector Body Design: Blue Composite, EV6 Injector type: Saturated Fuel Nozzle: 4-hole disc Flow rate: 39lbs/hr at 39 psi./2.7 BAR; 42lbs/hr...
  10. S

    Forged Cobra Crank 4.6L $550

    Forged Cobra Crank 4.6L $550 -SOLD I have a forged Ford OEM Cobra crank from a 1997 Cobra. It has already been machined and is good to go except it has a little bit of surface rust from sitting in the garage. I was going to build a forged motor over the winter, but I have decided to just run...
  11. S

    E85 with Supercharger and Road Course. It works!

    For what its worth I have found it hard to find info on E85 and its effect on IATs for running a road course. Well this weekend was my first event with running E85 and the Maggie MP112 at 10psi. On previous events (6-8) the IATs would get 70-80 above ambient on long runs and after 2 hard laps...
  12. S

    Tow Hooks Done! Now onto a cage.

    Just finished the hooks and now on to the cage.
  13. S

    E85 and the little MP112

    If you guys have FI and live anywhere close to an E85 station its worth the switch. The HP difference (seat of the pants) is awesome for the $ and I just filled up again for $1.65/gallon. I drove this car over 800 miles last weekend and averaged 24mpgs with Lito's tuning before the corn. Now...
  14. S

    Valve Train Rattle at Higher RPMs

    I thought it was detonation and the knock sensors were just bad. But I just made the switch to E85 (Thanks Lito) and I am still hearing it around 5600 and up. The motor has 88k on it. Any ideas?
  15. S

    WTB Lightweight 18x10s or 18x11s

    Looking for 18x10 to 18x11 lightweight wheels for a S197.
  16. S

    Need injector adapter asap. Where?

    Hey guys, I am installing a set of GT500 injectors (short) on my 4.6l (longer) and need the adapters. They appear to be too short. Where can I get the adapters asap. I will go through DTs if my car is down more than a day.
  17. S

    Anyone near Greensboro for E85 swap

    Hey guys, does anyone know if there is anyone near Greensboro, NC that knows what they are doing when it comes to tuning and switching me over to E85? I am running the GT500 pumps, 35/lb injectors and a Magnuson 112 with 6lbs boost. Trying to get more HP out of this thing. I was using someone...
  18. S

    Low ENGINE LOAD % on boosted 4.6?

    I am having STFT and timing issues and I wonder if its related to the engine load only showing 98-99%? I was told that it plays a large role in these parameters. Getting detonation above 5k and knock sensors aren't picking it up either. Shouldn't I be seeing 150%+?
  19. S

    Whats the difference between R compound to slicks?

    I searched and didn't have a lot of luck finding a post. I am currently running r888s in 275/40-18s and I am contemplating switching to 18x11s square set up that Vorshlag has listed and 315 R7s. I am just curious if anyone could comment who has made the transition from R compound to slicks and...
  20. S

    Newer to the forum. Pic of my Roush Mustang

  21. S

    Detonation after tuning: Need opinions!

    I had my 2006 Roush supercharged mustang tuned by a reputable company. They noticed on the dyno that my belt was slipping pretty bad above 5k rpm. I paid the $500 fee and ordered an 8 rib kit. Upon installation I noticed it made boost earlier and definitely no longer slipped on the bid end. Had...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top