Search results for query: *

Almost forgot! I also have a center mount triple gauge pod. Somebody can surely put this to good use as its only collecting dust and I'm tired of dusting it off. Lol I'll take $35 for it plus shipping. Don't think you'll find a better deal. At least for one this clean. Happy holidays to all!

Last item I have in operation garage clean up is set of GT500 fuel pumps. Includes the complete harness, (by Ford) and the additional FPDM. I'll take $450 including shipping or $400 plus the ride. These were taken out with approx 6k miles on them and swapped out for a triple pump system. In any...

I've got a brand new chi 2stage controller. Part numbe KWS0022. This is a must ESP when using a big shot. I call it insurance! It's fully programable and comes complete. Syst sells for 300 I'll let go for 175 shipped. I got off the dope before I had a chance to install it.

Came across this tonite in operation clean up. Lol Ford racing throttle body, for 4.6 3v. Forgot I had the thing. Brand new never installed. Will take $475 plus the ride. This will wake up a few sleeping ponies.

Brand new JDM Saleen 3.4 pulley. $50 plus shipping.

Just tryin to clean out the garage n found this. Triple gauge pod. $50 plus shipping.

Got a 30 amp Kenne Bell BAP w/controller and harness, $150, plus shipping.

Once again I'm looking for a lower OVER drive pulley for 10/12%. Anyone? Needs to be for an 05 4.6 stock crank.

I looked and looked but can't find any info. But what I'm looking for is if anyone has incorporated and installed an exhaust evac system? If you did some pics would be great ESP the exh bung location. Also any increases or problems with tune or PCM issues? Thanx

Anyone here, which I'm sure there are some who do, quest is who's runnin n20 and boost? Wondering how much of each and what comp ratios your using.

Lookin for a 15% OD crank pulley(6 rib). Anyone have one they want to get rid of?

Like it says up top, I'm looking for a forged rotating assy., for a std bore block. Crank needs to be 6 bolt. Looking to build small inch blower motor. I've got everything except the bottom end. What you guys got???

I've searched here and a dozen other places , but can't find an answer. FINALLY got a base line last night and gotta say not real impressed. Though it was 90 deg, 85-90%, not sure what the Baro press was, but anyway on a Mustang Dyno it made 369 rwhp, and 374 ft lbs respectively. Now my question...

Anyone running a blower with n20? Pro and cons and if your using a wet or dry system? I'm running a Saleen series vi blower and want to use the gas as a cooling agent for my AITs, rather than for power. The rotating assy is still stock so I'm limited to power level. Thanx for any help.

Hey guys, its been a while but between work and this car driving me nuts finally made it back. Hopefully some one here has done this and can help with some answers. Intelligent ones please? Anyway I recently aquired a Saleen blower and am almost done with the install. My questions are what can I...

Hey guys, well I find myself in need of a set of headers as my Mach LTs have rusted through and are now junk scrap. I'll even consider equal length shorties. Thanx!

Not sure if I'm in the right spot or not,but anyway a friend of mine gave me a Roush P-51 clutch and press plate. [late model s197] Anyway I've been looking for specs to see if it is useable or not. Anyone know what the service thickness should be? Also the press plate appears to have minor hot...

Gonna try and keep it short. I have to start with, I'm not easily impressed especially when it comes down to shops who claim this, and another claims that. What I will say though, is that BBR says what they mean, and mean what they say. That also applies to their staff. Their CS is Outstanding...

I have a Saleen Extreme Intake in "Like New" condition. Going a different route. Will take 175 plus the ride. This is one good intake but I'm thinking CF. This will fit all 05-09 3v/s.

Not sure if this is the right forum or not, if not mods please move it. My question is those who have installed an RCI seat harness, what did you do with the OEM seat belt, and how did you eliminate the seat belt dash light and warning chime?

Just wondering who you guys think the best Remote Tuner/ Tuners are, and why. Try to include things like Cust/Service, price, turn around time, how much time will they spend trying to get it right based on your mods, etc. Most important where you satisfied, and what improvement did you see...

Have a set of MMR red fuel rails will take 150 plus the ride.

Looking for a set of 3 blade wheel spinners. Anyone have a set they are willing to part with?

I've got a pair of OEM side view mirrors for sale if anyone needs them. They are black and in "like new" cond. Did a swap quite some time ago and just found them boxed up and put away. Really don't need them, so fig I'p put them up here if someone could use them. I'm guessin 100 shipped or BO...

As it says, I'm looking for a Demolet or JLT CAI for cheap as I'm going to use it experimentally. LMK what you have. Thanx.