Search results for query: *

I've experienced catastrophic valve train failure due to failing cam follwers (rollers / arms); both driver and passenger side. Has anyone else experienced this? Did you ever figure out the cause? My followers are failing in just a few thousand miles; less than 10K I believe. The rollers end up...

Has anyone tested the new MSD Coil Current Booster for Modular COPs? https://www.holley.com/products/ignition/ignition_boxes/street_and_strip/parts/8740 This is different than replacing your COPs, which have never performed for boosted applications. They work great for NA, but cause...

What is this?? Developed by British transmission manufacturer Torotrak, this new device promises to be quieter than a Roots-type supercharger and cooler than a turbocharger...

I am still on my second oil change on this new motor and this is what happens with roughly 4,000 miles on the new motor... sigh Driver side: Passenger side: Yes, that cylinder 1 most forward intake follower roller is seized!!! Cylinder # 2 and 4 most forward intake...

Has anyone experienced functional failure with the rear calipers when engaging the e-brake? Currently when I pull the e-brake, only the passenger side caliper locks, the driver's side does not lock. The actuator on the driver's side is pulled down, but the piston does not move. Hydraulically...

I have to replace my MT ET Street Radial IIs. Here they are as my car sits now; these are 305/35/18s. MT Street Radial II in a 305/35/18 on a 18x10 rim. I can only use 18s due to the size of my rear brakes. This car is mostly setup for road course and part time drag racing. I would like...

So, after I blew, actually disintegrated a spark plug at my very first track event after getting the motor rebuilt, I've been consuming oil ever since. Spark plug #7 post track: New replacement plugs with several hundred miles... I just checked the #7 plug and its chard black...so motor is...

Hello, looking for this foam mount for a GT500 emergency spare kit:

Have you guys seen this!!?? OMG!! Kulx2AfNZuY 10 second 2015 Ford Mustang GT: Ford Racing Roush Performance Supercharger Kit Ford Racing Rear Subframe Kit Ford Racing Heavy Duty Half-Shaft Kit Ford Racing Drive Shaft Loops Ford Racing Engine Tuning Calibration Hoosier Drag Racing Slicks...

So, I have been speaking with MSD on their coils. I have always been a fan of aftermarket ignition systems. MSD has always been my favorite, specifically the 6AL with a blaster coil. lol Anyway, after reading numerous failed attempts with our cars and installing/running MSD COPs and countless...

Hey guys, Anyone install Fore Innovations fuel rails on a ROUSH supercharged motor; M90, VMP 1.9L TVS, or the 2.3L TVS? The alternator is bolted in three places, two ears and one rear mount, but using the Fore Innovations fuel rails does not allow for the L shape bracket to be installed. So...

Looking to see if anyone has ever heard of Engine Ice...? http://www.engineice.com/index.php Lc1FDZL0FBU

I searched and all the examples of installs I found were related to pre-2008 or post 2010. My 2008 has OEM side airbags. I would like to know if 2011-2012 FRPP Recaro seats will connect to the airbag wiring without issues. Any help would be greatly appreciated.

So I posted this question in my build thread, but didn't get many replies probably due to the subject title. This is the situation: My local engine builder is assembling the short block. He ordered the same Speed Pro 149M main bearings as was installed originally. When he checked the...

So who is going to the Mustang's Northwest Round Up this year??? I've got my registration in to the Ride & Drive!! Hopefully my car will be done by then. So excited!!!

Hey guys, looking for owners of the new 1.9L TVS blower... Looking for feedback on pulley sizes, boost results, and belt sizes used. Below is the link to the 1.9L TVS order page and you can see there are 7 different choices in pulley configurations...

First, I'm not sure where this subject fits. I posted here in the corner carvers forum as I know many track rats trailer their cars. So, I would like to trailer may car to track and drag racing events. Until now I have commuted back and forth to the track, but with my new found setup, I am...

So what limits RPMs in our motors? Obviously, the first thing that comes to mind is valve springs. So, how do you know how high you can rev relating to upgraded springs? Does fuel type have a limiting factor; race/E85 vs pump? My stock ROUSH used to rev up to 6400 (fuel cutoff). My new...

HELP: Removing Blower/Caged Pulley (03-04 Blower Pulley) How the hell do you remove this damn spider pulley!!?? Its the same spider/blower pulley on a 2004 SVT Cobra. Its reversed threaded into the engine crank/damper. I understand its reversed threads, so I am applying torque clockwise...

Trying to purge the garage!!! All used parts are off a 2008 ROUSH Stage 3 Mustang (Supercharged 4.6L). VMP Tuning, ROUSH, Ford Racing parts: -VMP 90mm Cold Air Intake for M90 superchargers; $190 obo -MRT high-flow catted H-pipe; $400 obo -ROUSH 2.3L TVS MAF housing and air inlet tube...

The final Race Wars for the year is this Saturday in Royal City!!! So who's going? Weather looks good out there, not so sure about the Seattle area. I really don't want to drive in the rain with drag radials. lol Come on, lets get a group of Mustangs out there...

There is a track day at The Ridge Motorsports track which was designed after Thunder Hill on October 7th. Who's going? I'm waiting to register to see how the weather will pan out. I really don't want to run in the rain. lol

Just figured I'd post a thread specifically calling JDM 302E engine owners as I probably don't get a vast audience posting it in my build thread. Anyway, I would like you know your experiences with the JDM 302E motor. From first crank to today, the good and the bad, technical challenges...

Is this something to worry about...? This wasn't happening earlier (first start up until ???); readings used to be solid - needle was steady. Not sure when it started to vibrate like that. Is it the gauge or the oil pressure??? Has anyone ever experienced this? Video:

Just signed up for the August 23rd track day at The Ridge Motorsport Park!!! WAHOO!!! So excited!! :snoopy Who's going!!?? Never been at The Ridge...anyone have any pointers?